Recent from talks
History of wildlife tracking technology
Knowledge base stats:
Talk channels stats:
Members stats:
History of wildlife tracking technology
The history of wildlife tracking technology involves the evolution of technologies that have been used to monitor, track, and locate many different types of wildlife. Many individuals have an interest in tracking wildlife, including biologists, scientific researchers, and conservationists. Biotelemetry is "the instrumental technique for gaining and transmitting information from a living organism and its environment to a remote observer".
John James Audubon, a French American naturalist, ornithologist, and painter was the first person that attempted to paint and describe all the birds of America. In 1803, he conducted the first known bird banding experiment in North America and tied strings around the legs of Eastern Phoebes. He observed that the birds would return to the same nesting site every year, demonstrating philopatry.
Bird banding was used in 1890 by Hans Christian C. Mortensen, a Danish biologist. Birds can be captured by hand, using mist-nets, cannon-nets, or cage traps. A band that is typically made out of aluminum, or coloured plastic is attached to the leg of the bird. Each band has a unique identification code so that when birds are later recaptured, individuals can be identified. Mist-nets became widely available in the early 1950s, which dramatically increased the recovery of marked birds.
The first scientific paper on scale clipping was published in 1933. Sharp dissecting or microsurgical scissors are used to clip specific ventrals on snakes. A serial enumeration system is used so that individuals can be identified based on the scarring pattern.
During World War II, birds that were migrating caused "phantom signals" or "radar angels" to appear on radar screens. Since then, radar has become a widely used method for studying migrating organisms. Early radar technologies, such as WSR-57 (Weather Surveillance Radar - 1957), have been replaced by the Next Generation Weather Radar program (NEXRAD) which was installed in segments during the 1990s. Also known as WSR-88D (Weather Surveillance Radar 88 Doppler), NEXRAD is a doppler system that replaced older non-Doppler meteorological radars. NEXRAD can determine both the direction and speed of migrating individuals that are traveling both towards and away from the radar.
Isotope analysis is based on the principle that most elements exist in two or more forms, known as isotopes. Isotopes have the same number of protons but differ in their number of neutrons, resulting in different masses. This variation in the relative abundance of stable isotopes results from tiny mass differences that cause the isotopes to act differently in chemical reactions and physical processes. Different environments are often characterized by predictable isotopic signatures, meaning that organism's unique isotopic signatures can be traced to unique environments containing the same isotope signatures. The fundamental design of isotope ratio mass spectrometers, a tool used for analyzing isotopes, has not changed since the 1940s. Stable-isotope analysis (SIA) is frequently used with birds since only one capture is needed to determine its breeding origin. SIA is based on the principle that birds will retain isotopic information in their tissues that are based on the isotopic landscapes they inhabited in the recent past. Isotopic information is obtained mostly from feathers, since the keratin in feathers is metabolically inert. For various bird species tested, their feathers' elemental turnover rate is positively correlated with their metabolic rate. A problem with SIA occurs if birds undergo protein catabolism during migration and their isotopic information is subsequently lost as a result of blood-cell replacement. SIA is difficult to employ on birds that switch their diets seasonally due to the difficulty of separating isotopic changes due to location change from isotopic changes due to diet change. The elements that are primarily analyzed for SIA are: carbon, nitrogen, oxygen, hydrogen, and sulphur. Isotopic variation among plants is largely based on differences in photosynthetic pathways. The method is beneficial since it relies on capturing an individual only once. Important information can be obtained from something as simple as a birds' feather, which is relatively easily and painlessly extracted.
Acoustic telemetry is based on the principles of sonar, which was developed to detect submarines during World War I. The properties of acoustic systems favour their use in deep waters with high conductivity and low turbulence. The first acoustic telemetry equipment was developed for studying fish in 1956 by the U.S. Bureau of Commercial Fisheries and the Minneapolis-Honeywell Regulator Corporation. Individuals that want to track marine wildlife in salt water face unique challenges. Radio waves are highly absorbed by salt water, making them a poor choice for sending messages through the ocean. Sound waves, on the other hand, are not similarly impeded by seawater. Due to the fact that sound can travel more than 4 times faster in water than in air, this allows for near real-time listening over long distances with proper acoustic telemetry equipment. Acoustic signals are the preferred communication tool for researchers who wish to track fish and wildlife in marine habitats in real time. As with radio, acoustic telemetry requires transmitters to send signals and receivers to hear them. The transmitters are electronic tags that emit a series of sound pulses into the surroundings. They can be surgically implanted or attached externally to an organism. The range of signal reception can vary from a few meters to more than a thousand meters. The signal typically transmits once every minute or two, in order to conserve battery life. Receivers are small, data-logging computers that “listen” for tagged individuals. When a signal is identified, the tag's unique ID code is saved with the date and time. The data from any single receiver provide a record of each signal to that location by a tagged individual. Researchers might deploy many receivers over large regions to understand the movement patterns of tagged individuals. Hydrophones, a type of underwater microphone, receive acoustic signals and then either store or convert them into radio signals for rapid transmission through the air to receivers on shore.
VHF (very high frequency) telemetry typically requires a user to acquire VHF transmissions from a VHF transmitter (usually in a collar attached to the animal) using a hand-held antenna. VHF signals are either received by mobile or stationary receivers equipped with directional antennae. The location of the transmitter can then be determined by acquiring the transmissions from three (or more) different locations to triangulate the location of the device. VHF tracking is more commonly known as "radio-tracking."
Hub AI
History of wildlife tracking technology AI simulator
(@History of wildlife tracking technology_simulator)
History of wildlife tracking technology
The history of wildlife tracking technology involves the evolution of technologies that have been used to monitor, track, and locate many different types of wildlife. Many individuals have an interest in tracking wildlife, including biologists, scientific researchers, and conservationists. Biotelemetry is "the instrumental technique for gaining and transmitting information from a living organism and its environment to a remote observer".
John James Audubon, a French American naturalist, ornithologist, and painter was the first person that attempted to paint and describe all the birds of America. In 1803, he conducted the first known bird banding experiment in North America and tied strings around the legs of Eastern Phoebes. He observed that the birds would return to the same nesting site every year, demonstrating philopatry.
Bird banding was used in 1890 by Hans Christian C. Mortensen, a Danish biologist. Birds can be captured by hand, using mist-nets, cannon-nets, or cage traps. A band that is typically made out of aluminum, or coloured plastic is attached to the leg of the bird. Each band has a unique identification code so that when birds are later recaptured, individuals can be identified. Mist-nets became widely available in the early 1950s, which dramatically increased the recovery of marked birds.
The first scientific paper on scale clipping was published in 1933. Sharp dissecting or microsurgical scissors are used to clip specific ventrals on snakes. A serial enumeration system is used so that individuals can be identified based on the scarring pattern.
During World War II, birds that were migrating caused "phantom signals" or "radar angels" to appear on radar screens. Since then, radar has become a widely used method for studying migrating organisms. Early radar technologies, such as WSR-57 (Weather Surveillance Radar - 1957), have been replaced by the Next Generation Weather Radar program (NEXRAD) which was installed in segments during the 1990s. Also known as WSR-88D (Weather Surveillance Radar 88 Doppler), NEXRAD is a doppler system that replaced older non-Doppler meteorological radars. NEXRAD can determine both the direction and speed of migrating individuals that are traveling both towards and away from the radar.
Isotope analysis is based on the principle that most elements exist in two or more forms, known as isotopes. Isotopes have the same number of protons but differ in their number of neutrons, resulting in different masses. This variation in the relative abundance of stable isotopes results from tiny mass differences that cause the isotopes to act differently in chemical reactions and physical processes. Different environments are often characterized by predictable isotopic signatures, meaning that organism's unique isotopic signatures can be traced to unique environments containing the same isotope signatures. The fundamental design of isotope ratio mass spectrometers, a tool used for analyzing isotopes, has not changed since the 1940s. Stable-isotope analysis (SIA) is frequently used with birds since only one capture is needed to determine its breeding origin. SIA is based on the principle that birds will retain isotopic information in their tissues that are based on the isotopic landscapes they inhabited in the recent past. Isotopic information is obtained mostly from feathers, since the keratin in feathers is metabolically inert. For various bird species tested, their feathers' elemental turnover rate is positively correlated with their metabolic rate. A problem with SIA occurs if birds undergo protein catabolism during migration and their isotopic information is subsequently lost as a result of blood-cell replacement. SIA is difficult to employ on birds that switch their diets seasonally due to the difficulty of separating isotopic changes due to location change from isotopic changes due to diet change. The elements that are primarily analyzed for SIA are: carbon, nitrogen, oxygen, hydrogen, and sulphur. Isotopic variation among plants is largely based on differences in photosynthetic pathways. The method is beneficial since it relies on capturing an individual only once. Important information can be obtained from something as simple as a birds' feather, which is relatively easily and painlessly extracted.
Acoustic telemetry is based on the principles of sonar, which was developed to detect submarines during World War I. The properties of acoustic systems favour their use in deep waters with high conductivity and low turbulence. The first acoustic telemetry equipment was developed for studying fish in 1956 by the U.S. Bureau of Commercial Fisheries and the Minneapolis-Honeywell Regulator Corporation. Individuals that want to track marine wildlife in salt water face unique challenges. Radio waves are highly absorbed by salt water, making them a poor choice for sending messages through the ocean. Sound waves, on the other hand, are not similarly impeded by seawater. Due to the fact that sound can travel more than 4 times faster in water than in air, this allows for near real-time listening over long distances with proper acoustic telemetry equipment. Acoustic signals are the preferred communication tool for researchers who wish to track fish and wildlife in marine habitats in real time. As with radio, acoustic telemetry requires transmitters to send signals and receivers to hear them. The transmitters are electronic tags that emit a series of sound pulses into the surroundings. They can be surgically implanted or attached externally to an organism. The range of signal reception can vary from a few meters to more than a thousand meters. The signal typically transmits once every minute or two, in order to conserve battery life. Receivers are small, data-logging computers that “listen” for tagged individuals. When a signal is identified, the tag's unique ID code is saved with the date and time. The data from any single receiver provide a record of each signal to that location by a tagged individual. Researchers might deploy many receivers over large regions to understand the movement patterns of tagged individuals. Hydrophones, a type of underwater microphone, receive acoustic signals and then either store or convert them into radio signals for rapid transmission through the air to receivers on shore.
VHF (very high frequency) telemetry typically requires a user to acquire VHF transmissions from a VHF transmitter (usually in a collar attached to the animal) using a hand-held antenna. VHF signals are either received by mobile or stationary receivers equipped with directional antennae. The location of the transmitter can then be determined by acquiring the transmissions from three (or more) different locations to triangulate the location of the device. VHF tracking is more commonly known as "radio-tracking."