Recent from talks
South African Class 5E, Series 3
Knowledge base stats:
Talk channels stats:
Members stats:
South African Class 5E, Series 3
The South African Railways Class 5E, Series 3 of 1958 was an electric locomotive.
In 1958 and 1959, the South African Railways placed fifty-five Class 5E, Series 3 electric locomotives with a Bo-Bo wheel arrangement in mainline service.
Like the Series 2, all the Class 5E, Series 3 locomotives were built for the South African Railways (SAR) by Vulcan Foundry (VF), subcontracted by English Electric (EE) who had designed the locomotive and supplied the electric components. They were built in 1958 and entered service in 1958 and 1959, numbered in the range from E536 to E590.
The number range of the Series 3 locomotives did not follow directly on that of the Series 2, since the Class 5E1, Series 1 and the Class ES locomotives were allocated most of the numbers in between. Twelve numbers, E499, E513, E514 and those in the range from E527 to E535 were never allocated.
These dual cab locomotives had a roof access ladder on one side only, just to the right of the cab access door. The roof access ladder end was marked as the no. 2 end. A corridor along the centre of the locomotive connected the cabs, which were identical except that Cab 2 was where the handbrake was located.
Crews found the Class 5E to give a rough ride, which soon earned it the nickname Balstamper. The successor Class 5E1 with its new design bogies gave a smoother ride.
The Class 5E family entered service on the Natal mainline between Durban and Johannesburg and eventually served almost country-wide as electrification was completed on more mainlines. In 1960, sixty units of the Class 5E family were allocated to the Witbank section upon completion of its electrification. In December 1961, twelve of them were replaced by Class 32-000 diesel-electric locomotives and transferred to the newly electrified Touws River-Beaufort West section. More followed to replace the Class 25 condensers that were being transferred from that section to Beaconsfield in Kimberley at the time.
After withdrawal from service, only one Series 3 locomotive, no. E576, was sold into industrial service. It went to the Driefontein gold mine near Carletonville where, for an unknown reason, it was given the number plates from Series 2 no. E343 which had also been acquired by Driefontein.
Hub AI
South African Class 5E, Series 3 AI simulator
(@South African Class 5E, Series 3_simulator)
South African Class 5E, Series 3
The South African Railways Class 5E, Series 3 of 1958 was an electric locomotive.
In 1958 and 1959, the South African Railways placed fifty-five Class 5E, Series 3 electric locomotives with a Bo-Bo wheel arrangement in mainline service.
Like the Series 2, all the Class 5E, Series 3 locomotives were built for the South African Railways (SAR) by Vulcan Foundry (VF), subcontracted by English Electric (EE) who had designed the locomotive and supplied the electric components. They were built in 1958 and entered service in 1958 and 1959, numbered in the range from E536 to E590.
The number range of the Series 3 locomotives did not follow directly on that of the Series 2, since the Class 5E1, Series 1 and the Class ES locomotives were allocated most of the numbers in between. Twelve numbers, E499, E513, E514 and those in the range from E527 to E535 were never allocated.
These dual cab locomotives had a roof access ladder on one side only, just to the right of the cab access door. The roof access ladder end was marked as the no. 2 end. A corridor along the centre of the locomotive connected the cabs, which were identical except that Cab 2 was where the handbrake was located.
Crews found the Class 5E to give a rough ride, which soon earned it the nickname Balstamper. The successor Class 5E1 with its new design bogies gave a smoother ride.
The Class 5E family entered service on the Natal mainline between Durban and Johannesburg and eventually served almost country-wide as electrification was completed on more mainlines. In 1960, sixty units of the Class 5E family were allocated to the Witbank section upon completion of its electrification. In December 1961, twelve of them were replaced by Class 32-000 diesel-electric locomotives and transferred to the newly electrified Touws River-Beaufort West section. More followed to replace the Class 25 condensers that were being transferred from that section to Beaconsfield in Kimberley at the time.
After withdrawal from service, only one Series 3 locomotive, no. E576, was sold into industrial service. It went to the Driefontein gold mine near Carletonville where, for an unknown reason, it was given the number plates from Series 2 no. E343 which had also been acquired by Driefontein.
Recent media