Hubbry Logo
search
logo
Texas State Highway Loop 1 avatar
Texas State Highway Loop 1
Texas State Highway Loop 1
current hub
2005498

Texas State Highway Loop 1

logo
Community Hub0 Subscribers
Read side by side
Texas State Highway Loop 1
View on Wikipedia
from Wikipedia

State Highway Loop 1 marker State Highway Loop 1 marker
State Highway Loop 1
MoPac Expressway
Map
Loop 1 highlighted in red
Route information
Length25.698 mi[1] (41.357 km)
Existed1967–present
Major junctions
South end SH 45 in Austin
Major intersections
North end SH 45 Toll near Round Rock
Location
CountryUnited States
StateTexas
CountiesTravis, Williamson
Highway system
← SH 1→ FM 1

Loop 1 is a freeway that provides access to the west side of Austin in the U.S. state of Texas. It is named Mopac Expressway (or, according to some highway signs, Mopac Boulevard) after the Missouri Pacific Railroad (or "MoPac"). Local residents almost always use the name "MoPac" rather than calling the road by its number,[2][3] which can cause much confusion, for few signs along the road use this name.[4][5]

The original section of the highway was built in the 1970s along the right-of-way of the Missouri Pacific Railroad (now owned by Union Pacific), with the railroad tracks running in the highway median between West 8th Street and Northland Drive. To the north, the tracks run along the east side of newer sections of the highway from Northland Drive to Braker Lane.

History

[edit]
See also: Texas State Highway Spur 1

Route designation

[edit]

The first mention of Loop 1 in public record was in 1929. In 1944, the City of Austin Planning Commission (CMAC) proposed that the highway be built in parts of the under-utilized right of way owned by the MoPac Railroad. Thus, the highway was eventually given the nickname "MoPac" for its proximity to the railroad. The current Loop 1 was designated on October 27, 1967, from US 290 northward to Farm to Market Road 1325 (FM 1325).[6] On October 24, 1985, the designation was extended southward from US 290 to SH 45.[1]

Expressway construction (1969 to 2006)

[edit]

This table contains the dates of the construction of segments of the road.[7][8][9]

From To Length
(mi) 		Length
(km) 		Project
start 		Project
completion 		Notes
RM 2244
(Bee Cave Road) 		RM 2222
(Northland Road) 		5.4 8.7 February 1969 November 1975 Loop 1 project started with
construction of the 45th Street
Interchange in February 1969.
RM 2222 US 183 4.6 7.4 September 1977 June 1981 Northern terminus of Loop 1 completed,
until July 1989 - with construction of the freeway extension to FM 734.
RM 2244 Loop 360 1.9 3.1 January 1979 March 1982 Southern terminus of Loop 1 completed,
until October 1989 - with construction of the freeway extension to US 290.
Loop 360 US 290 1.6 2.6 October 1983 October 1989 Southern terminus of Loop 1 completed,
until November 1990 - with construction of the roadway
extension to Slaughter Lane.
US 183 FM 1325 (Burnet Road)
and FM 734 (Parmer Lane) 		3.7 6.0 January 1986 July 1989 Northern terminus of Loop 1 completed,
until October 2006 - with construction of the SH 45 North/
Loop 1 Connector toll road.
Stack interchange at US 183 is constructed -
involved major freeway improvements between Steck Avenue and US 183,
from March 1987 to June 1992.
US 290 Slaughter Lane 3.6 5.8 January 1988 November 1990 Southern terminus of Loop 1 completed,
until July 1991 - with construction of the roadway
extension to La Crosse Avenue.
Slaughter Lane La Crosse Avenue 1.0 1.6 July 1989 July 1991 Southern terminus of Loop 1 completed,
until May 1994 - with construction of the roadway
extension to State Highway 45 .
La Crosse Avenue SH 45 2.5 4.0 November 1989 May 1994 Southern terminus of Loop 1 completed.
FM 734 SH 45 North/
Loop 1 Interchange 		4.0 6.4 February 2003 October 2006 Construction on the SH 45 North Interchange
began in September 2003.
Northern terminus of Loop 1 completed.

Route description

[edit]
A stretch of Loop 1 over the Hancock Drive bridge, looking north-northwest. The Union Pacific railway is visible in the foreground.

Loop 1's southern terminus is at the beginning of the State Highway 45 stub south of Austin. It passes through the Circle C Ranch housing development and the Edwards Aquifer and intersects SH 71/US 290 (Ben White Boulevard) and Loop 360 (Capital of Texas Highway). It crosses the Colorado River near downtown Austin; the view of the Texas State Capitol from the bridge became one of the Capitol View Corridors protected under state and local law from obstruction by tall buildings in 1983.[10] North of the river, the highway runs parallel to the Balcones Fault and the Missouri-Pacific Railroad (Union Pacific) before it intersects US 183 (Research Boulevard) northwest of downtown. Loop 1 travels concurrently with Farm to Market Road 1325 for several miles before the non-tolled freeway ends at Parmer Lane, spanning a distance of 22.061 miles (35.504 km).

Loop 1 is designated a scenic roadway by the City of Austin.[11]

Major construction projects

[edit]

Loop 1 Toll

[edit]

North of Parmer Lane, Loop 1 continues as a limited-access toll road to the SH 45 North/Loop 1 interchange, spanning 3 miles (4.8 km). Frontage roads flank either side of the toll road to Merrilltown Drive.

The Texas Department of Transportation completed construction of the tollway as part of the 2002 Central Texas Turnpike Project (CTTP). SH 45 North, also part of the project, provides freeway access to Interstate 35 from Loop 1. The 2002 CTTP was scheduled to be completed in September 2007. However, certain sections of the project, including Loop 1 opened early and more than $100 million under budget.

If and when SH 45 is completed to the south of Austin between FM 1626 and I-35, Loop 1 will effectively serve as a full western loop to the city, being directly connected to SH 45 (and indirectly to I-35) at both ends.

MoPac Improvement Project

[edit]
Loop 1 Express marker
Loop 1 Express
Mopac Improvement Project
LocationAustin
Existed2017–present

Since 1994, TxDOT has proposed the addition of managed lanes to portions of Loop 1. The MoPac Improvement Project[12] was relaunched in July 2010 by the Central Texas Regional Mobility Authority (CTRMA). In December 2010, four alternative proposals were presented to the public, each of which would add one or more lanes; the "no-build" alternative was also presented. The additions would not increase the right-of-way of the highway, but would be created by reducing the width of existing lanes and reducing and/or eliminating shoulders. An environmental study was completed in August 2012 with a Finding Of No Significant Impact and a recommendation of one new travel lane in each direction, operated as express lanes.[13] Construction began in 2013, and was originally scheduled for completion in September 2015, but by August 2016, the Central Texas Regional Mobility Authority announced further delays.[14] The first of four tolled sections, specifically the northbound toll lane from RM 2222 to Parmer Lane, opened on October 17, 2016. The remainder of the northbound express lane, from Cesar Chavez Street to Parmer Lane, opened on October 7, 2017, and the entire southbound express lane opened on October 28, 2017.

MoPac Intersections Project

[edit]

In 2013, CTRMA and TxDOT initiated an environmental study to analyze the best options to improve the MoPac intersections at Slaughter Lane and La Crosse Avenue. In December 2015, the study was completed with a Finding Of No Significant Impact for the project, which allowed it to move forward.[15] The selected design included replacing the at-grade intersection at Slaughter Lane with a diverging diamond interchange (DDI)[16] and the at-grade intersection at La Crosse Avenue with a diamond interchange. The project broke ground in January 2018 with Webber, LLC as the general contractor.

On August 10, 2018, the at-grade Slaughter Lane intersection was rerouted to the south as construction began on an overpass bridge on the original alignment.[17] The completed DDI opened to traffic on November 11, 2018, with final completion occurring in Spring 2019. The La Crosse Avenue intersection began construction in Fall 2018. On March 29, 2019, the La Crosse Avenue at-grade intersection was closed for reconstruction as a bridge.[18] The La Crosse Avenue bridge and intersection opened to traffic on April 16, 2020. The full project, including surrounding sound walls and retention ponds, was officially completed on December 16, 2020.[19][20]

MoPac South

[edit]

In 2013, CTRMA and TxDOT initiated an environmental study of the MoPac corridor from Cesar Chavez Street to Slaughter Lane.[21] The environmental study identified the Express Lane(s) Alternative as the Recommended Build Alternative.[22] In October 2015, six proposals were presented to the public, each of which would add one of more express lanes; the "no-build" alternative was also presented.[23] In February 2016, the project was put on hold by a Save Our Springs lawsuit claiming the project had not complied with the National Environmental Policy Act's requirements for environmental studies.[24] The lawsuit was settled on July 18, 2018 with a ruling in favor of CTRMA by the 5th Circuit U.S. Court of Appeals.[25] However, the project was further delayed by a state moratorium on toll projects receiving funding from State Propositions 1 and 7. TxDOT gave CTRMA preliminary approval to resume planning for MoPac South in August 2019.[26] In November 2021, the project was officially revitalized with a virtual open house, and it is currently in public planning phases.

Exit list

[edit]

All exits are unnumbered.

CountyLocationmikmDestinationsNotes
TravisAustin0.00.0

 SH 45 west / SH 45 Toll east
0.71.1South Bay LaneAt-grade intersection; dead end both directions, turnaround only
1.52.4La Crosse Avenue
2.33.7Slaughter LaneDiverging Diamond Interchange
2.94.7Davis LaneSouthbound exit and northbound entrance
4.77.6William Cannon Drive
6.09.7 US 290 / SH 71 / Southwest Parkway – Johnson City, Llano, Sunset ValleyAccess to Baylor Scott & White Medical Center – Austin
6.610.6Frontage RoadSouthbound exit only
7.512.1 Loop 360 (Capital of Texas Highway)Only one exit ramp travels from southbound Loop 1 to southbound Loop 360; all others are at-grade
8.914.3Barton Skyway
9.815.8 RM 2244 (Bee Caves Road) / Wallingwood Drive – Rollingwood, West Lake Hills
Roberta Crenshaw Bridge over the Colorado River

 Loop 1 Express begins		South end of variable toll lanes
10.516.9Cesar Chavez Street / 5th Street / Lake Austin Boulevard
11.218.0Enfield Road
11.718.8Windsor Road
12.319.8Westover Road / Northwood Road
12.920.8 35th Street – Camp MabryAccess to Seton Shoal Creek Hospital
13.822.245th Street
14.823.8 RM 2222 (Northland Drive)
Loop 1 ExpressAccess point for variable toll lanes
15.925.6Far West Boulevard
16.626.7Anderson Lane / Spicewood Springs RoadDirect northbound exit and southbound entrance (southbound exit signed at Steck Avenue)
17.127.5Steck AvenueNo direct northbound entrance
17.327.8(no name)Northbound exit only; replaced by northbound collector distributor road underneath Steck Avenue[27]
18.029.0 US 183 (Research Boulevard)No direct southbound exit to US 183 north (signed at Capital of Texas Highway), access to Seton Northwest Hospital
18.730.1Capital of Texas Highway
19.130.7Braker Lane – Q2 StadiumDirect southbound exit and northbound entrance (northbound exit signed at Capital of Texas Highway)
20.533.0
 FM 1325 south (Burnet Road) / Duval Road		South end of FM 1325 overlap, access to North Austin Medical Center

 Loop 1 Express ends		North end of variable toll lanes; despite being signed as such, no direct access to FM 734 (Parmer Lane) exists
21.734.9 FM 734 (Parmer Lane)
22.436.0Scofield Ridge ParkwayLast free northbound exit before toll road begins; no direct southbound exit
22.436.0
 Loop 1 ends

 Loop 1 Toll begins		Northern terminus of Loop 1 (Mopac Expressway); southern terminus of Loop 1 Toll
23.137.2 FM 1325 / Wells Branch Parkway / Howard Lane, Merrilltown Drive Howard station
​24.038.6Merrilltown Toll Plaza
Travis–Williamson
county line		​24.539.4Shoreline DriveNo southbound exit
Williamson​25.641.2
 SH 45 Toll to I-35
1.000 mi = 1.609 km; 1.000 km = 0.621 mi

See also

[edit]

References

[edit]
[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

Texas State Highway Loop 1

View on Grokipedia
from Grokipedia
Texas State Highway Loop 1 (Loop 1) is a freeway in Travis County, Texas, designated from Farm to Market Road 1325 in North Austin southward and southwestward approximately 20.5 miles to State Highway 45.[1] Commonly known as the MoPac Expressway, the route parallels the tracks of the historic Missouri Pacific Railroad—abbreviated as MoPac—from which it derives its name, and serves as the primary north-south arterial on the western periphery of Austin.[2][3] Designated in 1967 as an alternative to Interstate 35 through downtown Austin, Loop 1 was constructed in phases from the late 1960s through the 1980s to accommodate growing suburban development on the city's west side.[1] Despite expansions adding lanes and interchanges, the highway has become notorious for chronic congestion, exacerbated by Austin's rapid population growth and limited capacity relative to demand.[2] To address this, the Central Texas Regional Mobility Authority implemented an 11-mile managed toll express lane in 2011 along the central section from Parmer Lane to Cesar Chavez Street, allowing variably priced access to bypass general-purpose lanes during peak hours.[4] Further improvements, including mainlane reconstructions and proposed southern express lanes, continue to evolve the corridor amid ongoing debates over tolling efficacy and environmental impacts.[5]

History

Planning and route designation

The concept of a highway paralleling the Missouri Pacific Railroad tracks in Austin emerged in the early 1940s, with the City of Austin Planning Commission proposing in 1944 to utilize underused railroad right-of-way for a north-south route to alleviate traffic congestion.[6] Detailed designs were formalized in the 1961 City of Austin Master Plan and Circulation Plan, envisioning the corridor as a key expressway linking growing suburban areas amid a population of approximately 160,000 in Travis County.[2] In October 1967, the Texas Highway Commission officially designated the project as State Highway Loop No. 1, establishing the initial route from U.S. Highway 290 southwest of Austin northward to Farm to Market Road 1325 in Travis County, despite its linear alignment rather than a full loop configuration.[3] This designation reflected plans for eventual connections to encircling routes like State Highway Loop 360 and U.S. Highway 183, though those integrations were never fully realized, leaving the highway as a de facto radial freeway.[6] Subsequent minute orders by the Texas Transportation Commission extended the designation southward and northward; for instance, Minute Order 033746 on October 24, 1985, reaffirmed and adjusted segments while maintaining the core Loop 1 numbering.[1] The route's planning prioritized parallel alignment to the railroad to minimize land acquisition costs and disruptions in an expanding urban area, influencing its enduring path through west Austin.[3]

Initial construction and northern segments

The initial construction of Texas State Highway Loop 1, aligned parallel to the Missouri Pacific Railroad right-of-way, began in 1969 after the route's formal designation as State Highway Loop No. 1 by the Texas Highway Commission in October 1967.[3] The first segments focused on central Austin, with the portion from RM 2244 (Bee Caves Road) to Loop 360 completed in 1973, followed by the opening of approximately 6 miles from RM 2222 to RM 2244 in 1975, initially handling 34,000 daily trips.[7][8] Northern segments advanced in phases during the 1980s to connect central Austin to growing suburbs. Construction from US 183 (Research Boulevard) southward to Loop 360 (Capital of Texas Highway) reached completion in 1982, establishing continuous expressway access over this roughly 5-mile stretch with three lanes in each direction.[9] An additional northern extension from US 183 to FM 1325 followed, with work starting in 1986 and finishing in 1989 to accommodate increasing traffic volumes northward toward emerging tech and research corridors.[9] These developments prioritized freeway-grade interchanges and minimal at-grade crossings to enhance mobility along the corridor.[8]

Southern extensions and completion

The southern segments of Loop 1 were constructed in phases during the 1970s and early 1980s, extending the freeway southward from its initial central alignments to connect with Loop 360. Construction of the section from Lady Bird Lake to RM 2224 concluded in 1973, establishing the initial southern reach through downtown Austin's west side.[7] This segment followed the Missouri Pacific Railroad right-of-way, as planned since the 1967 designation, to provide north-south relief to congested US 183 and IH 35.[9] Further southward extension from RM 2224 to the interchange with Loop 360 was completed in 1982, marking the primary completion of Loop 1's southern alignment as a continuous freeway.[7][9] This 1982 segment, spanning approximately 5 miles, included multi-lane configuration with interchanges at key arterials like Barton Springs Road, addressing growing suburban development in South Austin and Zilker.[9] The connection to Loop 360 facilitated circumferential travel, though the overall "loop" designation remained partial due to unbuilt eastern and southwestern segments.[9] These extensions finalized the core MoPac Expressway corridor from Parmer Lane southward to Loop 360, totaling about 13 miles of freeway by 1982, with subsequent minor modifications but no major southward advances until contemporary proposals.[7] TxDOT records indicate the 1982 completion resolved key bottlenecks in the southern half, though traffic volumes soon exceeded design capacities, prompting later managed lane additions northward.[9] The southern terminus at Loop 360 has since served as the endpoint, with environmental and planning studies for potential extensions to SH 45 Southwest ongoing but unimplemented as of 2025.[7]

Post-completion modifications

Following the completion of the southern extension from Slaughter Lane to SH 45 in 1991, Loop 1 received targeted infrastructure modifications to enhance interchange functionality and accommodate rising traffic volumes prior to larger-scale expansions.[7] In 2005, an overpass linking US 290 to William Cannon Drive was constructed, providing a dedicated elevated connection to reduce ground-level congestion in the southern segment.[7] The US 290 West/Loop 1 interchange underwent reconstruction, with completion in spring 2012 at a cost of $13 million, incorporating improvements to ramps and merges for better operational efficiency.[2] Direct connectors at the MoPac Expressway/US 290 interchange were installed in 2013, designed to eliminate weaving movements and boost throughput without altering the mainline configuration.[7]

Route description

Overall alignment and naming

Texas State Highway Loop 1 is a freeway extending approximately 20.5 miles through Travis County, beginning at Farm to Market Road 1325 (Parmer Lane) in north Austin and proceeding southward and southwestward to State Highway 45. The route generally parallels the historic Missouri Pacific Railroad tracks along the western flank of the city, serving as a key north-south corridor for commuters accessing central Austin, the University of Texas area, and southern suburbs. It crosses the Colorado River via bridges over Lady Bird Lake and integrates with radial highways such as U.S. Highway 183 to the north, U.S. Highway 290 and State Highway 71 centrally, before terminating at the SH 45 interchange southeast of downtown.[1] Designated as State Highway Loop No. 1 by the Texas Highway Commission in October 1967, the highway was intended to form part of a circumferential route encircling Austin, though only this western segment was ultimately constructed and signed as such. Despite the official numeric designation, the roadway is universally referred to by the public as the MoPac Expressway, a name derived from its close proximity to the parallel Missouri Pacific Railroad—commonly abbreviated as MoPac—which predates the freeway by decades, with tracks laid as early as 1915.[3][9][6] The persistence of the MoPac moniker reflects longstanding local usage tied to the railroad's influence on the area's development, even as official signage emphasizes Loop 1 and recent toll implementations have introduced managed express lanes along portions of the alignment. This dual naming convention underscores the highway's evolution from a planned loop element to a linear expressway integral to Austin's west-side mobility, without the completion of connecting eastern or northern arcs originally envisioned.[9][6]

Key interchanges and features

Loop 1, known as the MoPac Expressway, terminates at the southern end in a major interchange with SH 45 southwest of Austin, facilitating connections to the SH 45 toll road network and access to areas like Circle C Ranch.[10] Moving north, the highway features a partial cloverleaf interchange with US 290 (Ben White Boulevard), serving traffic to and from central Austin and western suburbs such as Oak Hill.[2] An adjacent interchange with SH 71 provides links to Austin-Bergstrom International Airport eastward and to Bee Cave westward, handling significant commuter and airport-bound volumes.[11] Further north, the stack interchange with US 183, completed in June 1992 after construction began in March 1987, accommodates high-capacity north-south travel toward Round Rock and beyond, incorporating major freeway widenings between Steck Avenue and US 183.[12] The northern terminus connects to SH 45 Toll (SH 45N) via a limited-access toll segment extending three miles from Parmer Lane, opened on November 1, 2007.[12] A defining feature is the MoPac Express Lanes, buffer-separated reversible managed toll lanes spanning 11 miles from Cesar Chavez Street to Parmer Lane, utilizing variable tolling to maintain speeds above 45 mph during peak congestion.[4] These lanes, operated by the Central Texas Regional Mobility Authority, opened progressively in 2017, with the northbound direction fully operational by October 7 and southbound by October 28.[13][14] The expressway's name derives from its paralleling of the historic Missouri Pacific Railroad tracks.[3] Between Parmer Lane and US 290, the mainline typically consists of six general-purpose lanes, three in each direction, with frontage roads providing local access.[2]

Exit list

The interchanges along Texas State Highway Loop 1 (MoPac Expressway) are signed by destination names rather than sequential numbers, consistent with practices on many Texas freeways without posted exit numbering. The route features approximately 20 interchanges serving Austin's west side, primarily local arterials and key state highways, facilitating access to residential, commercial, and institutional areas including the University of Texas and downtown. From south to north, major interchanges include SH 45 (southern terminus), Slaughter Lane, Davis Lane, Cesar Chavez Street, Barton Skyway, Enfield Road, 45th Street, 35th Street, Koenig Lane, Northland Drive, Hancock Drive, Burnet Road/Duval Road, Steck Avenue, Braker Lane (serving Q2 Stadium), and FM 734 (Parmer Lane, northern terminus). [4] [15] [16]
mi (approx.)DestinationsNotes
0.00SH 45 eastSouthern terminus; connects to Austin-Bergstrom International Airport via partial interchange; toll-managed lanes begin nearby. [15]
3.7Slaughter LaneServes southwest Austin residential areas; partial cloverleaf.
4.7Davis LaneLocal access in South Austin; diamond interchange. [17]
~7Cesar Chavez StreetNorthern limit of MoPac South improvements; connects to downtown Austin; variable toll express lanes originate here. [4]
~9Enfield RoadAccess to older neighborhoods and Lake Austin; partial interchange with frontage road connections. [16]
~1145th StreetServes University of Texas vicinity and Texas School for the Blind; eastbound to Highland Terrace. [18]
~30.7Braker LaneServes Q2 Stadium and tech corridor; recent expansions for capacity. [19]
33.0FM 1325 (Burnet Road)/Duval RoadUndersigned partial access; connects to local business districts. [16]
~34FM 734 (Parmer Lane)Northern terminus of main freeway segment; toll lanes end; diamond interchange serving suburban growth areas. [15]
The full sequence includes additional minor local exits such as La Crosse Avenue, Rollingwood access, 35th Street, and Northland Drive, with configurations varying between diamond, partial cloverleaf, and trumpet interchanges to accommodate high traffic volumes exceeding 200,000 vehicles daily in peak segments. [2] Ongoing TxDOT and Mobility Authority projects have added frontage road improvements and express lane access at several of these locations to mitigate congestion. [9]

Design and operational features

Roadway configuration and toll system

Loop 1 employs a freeway configuration featuring general-purpose mainlanes supplemented by parallel frontage roads in urban areas for local access and managed express lanes in congested corridors. Along the core 11-mile segment from Cesar Chavez Street to Parmer Lane, the roadway includes three general-purpose lanes and one additional buffer-separated express lane in each direction, providing four through lanes total per direction.[4] Frontage roads, where present, typically offer two lanes bidirectional and connect to interchanges, while the express lanes feature restricted access at major points including Cesar Chavez Street, Far West Boulevard/Anderson Lane, and Parmer Lane.[4] A 4- to 5-foot buffer with delineators separates the express lanes from general-purpose lanes to enhance safety and flow.[4] Commercial vehicles, including trucks and trailers, are barred from express lanes to prioritize passenger traffic.[4] The toll system divides into variable-priced express lanes and a fixed-toll northern extension, both all-electronic without booths. The MoPac Express Lanes, spanning 11 miles from Cesar Chavez Street to Parmer Lane and operated by the Central Texas Regional Mobility Authority (CTRMA) in partnership with TxDOT, use dynamic pricing algorithms to sustain speeds over 50 mph by adjusting rates based on real-time traffic volume and velocity, with values shown on dynamic message signs.[4] [15] Base rates commenced at $0.65 per segment or $1.30 for the full extent but escalate during peak demand; toll-free entry applies to public transit buses and registered vanpools under HOV provisions.[4] Tolls accept interoperable electronic tags (e.g., TollTag, TxTag) for discounts up to 33% or pay-by-mail with added fees.[4] North of Parmer Lane, a four-mile tolled extension to SH 45N operates under TxDOT's Central Texas Turnpike System with fixed electronic rates across a six-lane facility (three lanes each direction) and limited frontage roads.[15] [20] Remaining segments of Loop 1 function as untolled general-purpose freeway.[21]

Safety and maintenance aspects

Loop 1, known as the MoPac Expressway, records a substantial number of motor vehicle crashes attributable to its high daily traffic volume exceeding 180,000 vehicles, contributing to congestion-related incidents such as rear-end collisions and lane-change accidents, particularly at interchanges like those near Slaughter Lane.[22] [23] Analyses from traffic safety reviews place MoPac among Austin's roadways with elevated crash frequencies, including reports of over 800 accidents and multiple fatalities in examined periods, though exact annual figures vary by data source and underscore the corridor's role in regional incident hotspots.[23] [24] Safety enhancements include the HERO (Highway Emergency Response Operator) program, operated by TxDOT, which deploys patrols for rapid clearance of minor crashes, vehicle assistance, and debris removal along the corridor to minimize secondary incidents and restore flow.[25] The managed express lanes feature flexible delineators permitting emergency vehicle access for disabled vehicle removal without halting general traffic, alongside dynamic tolling to sustain speeds above 45 mph and mitigate rear-end risks from slowdowns.[4] Maintenance responsibilities are divided between the Texas Department of Transportation (TxDOT) and the Central Texas Regional Mobility Authority (CTRMA). TxDOT handles general-purpose lanes, bridges via the Bridge Inventory, Inspection and Appraisal Program (BRINSAP), and routine visual checks to address pavement, signage, and structural integrity.[26] CTRMA maintains express lanes through proactive protocols, including third-party inspections rated on a 1-5 scale for non-TxDOT assets and integration of crash data into condition assessments, with annual reports documenting compliance and upkeep to prevent deterioration impacting safety.[26] [27] Joint oversight ensures coordinated responses to wear from heavy use, though shared cost reimbursements highlight ongoing fiscal dependencies between entities.[28]

Major improvement projects

Early toll implementations

The northern extension of Loop 1, spanning approximately 4 miles from Parmer Lane to SH 45 North, marked the initial toll implementation on the highway as part of the Central Texas Turnpike System. Designated as a toll project by Texas Transportation Commission Minute Order 108896 on May 30, 2002, this segment was developed to enhance connectivity in northern Austin and fund regional infrastructure through user fees.[29] Construction was financed via a combination of state bonds and anticipated toll revenues, reflecting a shift toward toll financing for expansions where traditional gas tax funding proved insufficient.[30] The extension opened to traffic in November 2006, initially operating toll-free to facilitate initial usage and system integration with adjoining segments of SH 45 and SH 130.[30] Toll collection commenced in January 2007 under the management of the Central Texas Regional Mobility Authority, with rates structured as flat fees per segment—typically $0.50 to $1.00 depending on direction and time, collected electronically via transponders to minimize delays.[31] This implementation pioneered tolling in the Austin area, generating revenue for debt service and maintenance while aiming to manage demand on the new roadway.[30] Early operations focused on barrier tolling at key plazas, with exemptions for local traffic via discounted passes, though full enforcement emphasized all users contributing to sustainment costs. By design, the toll structure prioritized revenue stability over congestion pricing, differing from later dynamic models elsewhere on Loop 1. Usage data from initial years indicated steady adoption, with toll revenues supporting broader system expansions amid growing suburban development pressures.[32]

MoPac Improvement Project

The MoPac Improvement Project constructed one variably priced express lane in each direction along an approximately 11-mile segment of Loop 1 from Cesar Chavez Street to Parmer Lane in Austin, Texas, to enhance mobility and reduce congestion on the corridor.[4][33] The project, led by the Central Texas Regional Mobility Authority (CTRMA) in partnership with the Texas Department of Transportation (TxDOT), utilized existing right-of-way to minimize land acquisition and focused on managed lanes to prioritize high-occupancy and toll-paying vehicles during peak periods.[34][2] Express lanes are separated from general-purpose lanes by a 4- to 5-foot buffered zone with flexible delineators, allowing dynamic pricing to maintain speeds above 45 mph under typical conditions.[4] Entry and exit points are limited to Cesar Chavez Street, Far West Boulevard/Anderson Lane, and Parmer Lane, with tolls collected electronically via TxTag or other compatible transponders; rates vary by demand, starting as low as $0.65 per segment.[4] Public transit buses, registered vanpools, and emergency vehicles travel toll-free, while the project also incorporated noise mitigation via sound walls and minor enhancements for bike and pedestrian paths adjacent to the corridor.[4] The total cost was approximately $204 million, funded primarily through toll revenue bonds issued by the CTRMA, with construction confined largely to nighttime hours to limit disruptions.[33][35] Planning for the project originated in TxDOT studies dating to the early 2000s, identifying chronic bottlenecks on MoPac due to population growth and insufficient capacity; environmental clearance was achieved by 2010, enabling contract awards and groundbreaking in late 2013.[9][2] Construction spanned about four years, incorporating upgrades to interchanges and retaining walls, with the express lanes opening to traffic in November 2017 after final testing.[35][34] As of 2025, the lanes remain fully operational, providing reliable travel options amid ongoing regional traffic pressures, though integration with adjacent projects like US 183 improvements continues to evolve.[4][36]

MoPac Intersections Project

The MoPac Intersections Project, undertaken by the Texas Department of Transportation (TxDOT), targeted congestion and safety issues at the intersections of Loop 1 (MoPac Expressway) with Slaughter Lane and La Crosse Avenue in southwest Austin, Texas. These at-grade intersections, originally constructed in 1992, had deteriorated due to rapid population growth and increased traffic volumes, leading to prolonged delays and higher crash risks.[37] The project aimed to separate north-south through-traffic on MoPac from east-west local movements by depressing the mainlanes beneath the cross streets, thereby improving mobility for motorists, transit users, bicyclists, and pedestrians while minimizing environmental disruption in the sensitive Barton Springs segment of the Edwards Aquifer recharge zone.[38][39] Key improvements included extending MoPac mainlanes through underpasses at both locations, constructing a diverging diamond interchange (DDI) at Slaughter Lane to facilitate efficient signalized crossovers, and retaining a conventional intersection at La Crosse Avenue with enhanced signals.[38] Additional features encompassed a 10-foot shared-use path along the west side of MoPac between the intersections, dedicated bicycle and pedestrian accommodations, and optimized traffic signals within the existing right-of-way.[38] The project spanned approximately 2.7 miles, with the Slaughter Lane bridge measuring 204 feet long and 116 feet wide.[40] TxDOT issued a Finding of No Significant Impact (FONSI) on December 22, 2015, following the Final Environmental Assessment released on December 3, 2015, despite concerns raised by environmental groups regarding potential aquifer impacts and habitat loss.[41][37] Construction commenced in January 2018 under a $53.5 million contract awarded to Webber, with phased work at Slaughter Lane to maintain access.[42][43] The project faced typical urban challenges, including nighttime operations to reduce disruption, but achieved substantial completion by late 2020, culminating in a ribbon-cutting ceremony on December 16, 2020.[44] Post-completion evaluations indicated reduced wait times, enhanced safety through fewer conflict points at the DDI, and preserved local connectivity without expanding the overall footprint significantly.[45][46]

MoPac South and recent proposals

The MoPac South project encompasses an approximately 8-mile segment of Loop 1 from Cesar Chavez Street southward to Slaughter Lane, where the Central Texas Regional Mobility Authority (CTRMA) and Texas Department of Transportation (TxDOT) are evaluating options to alleviate chronic congestion through the addition of variably priced express toll lanes.[47][48] The initiative builds on prior planning efforts, with TxDOT granting CTRMA preliminary approval to resume studies in August 2019 following earlier delays, focusing on capacity enhancements without general-purpose lane additions to prioritize high-occupancy and toll-paying users.[49] Under the ongoing environmental study initiated by CTRMA and TxDOT, the preferred alignment, Alternative 2C, proposes up to two new express lanes in each direction, including an elevated overpass structure to maintain frontage road functionality and reduce weaving conflicts.[50] This configuration aims to extend mainlanes beneath key intersections at Slaughter Lane and La Crosse Avenue, incorporating grade separations to improve traffic flow and safety.[37] Public renderings released on November 13, 2024, illustrate new access points at Slaughter Lane, William Cannon Drive, and other mid-corridor locations, connecting to downtown Austin via at least one express toll lane.[51] Recent advancements include rekindled momentum in October 2024, with CTRMA opening the proposal for public feedback through November 2024 and designating MoPac South as a priority in the fiscal year 2025-26 capital improvement plan approved in June 2025.[52][50] TxDOT hearings on November 12, 2024, detailed the express lane additions, projecting construction commencement as early as 2025 pending environmental clearance and funding.[5] The environmental assessment, updated through July 2025 technical working group meetings, addresses air quality, noise mitigation via sound walls and landscaping, and integration with local trails like the Yeager Bridge Connector, while excluding detailed NOx or ozone health impact modeling.[53]

Traffic patterns and capacity

Historical and current usage data

Traffic volumes on Loop 1 (MoPac Expressway) have exhibited steady growth correlating with Austin's population expansion and suburban development. In the 1990s, annual average daily traffic (AADT) at the Ranch to Market Road 2222 interchange reached approximately 111,000 vehicles, rising to 156,000 by 2000.[9] By the early 2010s, AADT in the northern segment from Parmer Lane to US 290 West averaged 127,000 vehicles, though county-wide estimates approached 180,000 daily users across the corridor.[2] The opening of managed express lanes in October 2017, spanning Cesar Chavez Street to Parmer Lane, contributed to further volume increases as drivers shifted to the tolled option to bypass congestion. Post-implementation monitoring indicated rising total throughput, with corridor-wide AADT exceeding 180,000 vehicles per day in subsequent years.[4] Recent assessments by the Texas A&M Transportation Institute place peak daily usage at up to 200,000 vehicles, reflecting sustained demand despite capacity additions.[54] Projections from the Central Texas Regional Mobility Authority forecast AADT surpassing 220,000 by 2035, driven by regional growth and limited alternative routes west of Interstate 35.[4] Segment-specific variations persist, with northern sections near Parmer Lane experiencing higher volumes than southern extents south of US 290, underscoring uneven distribution tied to employment and residential nodes.[9]

Congestion causes and metrics

Congestion on Texas State Highway Loop 1, known as the MoPac Expressway, stems primarily from a persistent imbalance between roadway capacity and surging demand driven by Austin's rapid population and economic expansion, which has increased daily vehicle volumes beyond the corridor's design limits. The highway serves as a critical north-south artery for commuters traveling between northern suburbs like Round Rock and downtown Austin or south toward areas like Oak Hill, resulting in peak-hour demand that routinely exceeds available lanes, particularly during morning southbound flows (7-9 a.m.) and evening northbound rushes (4-7 p.m.).[55][56] Ongoing construction for capacity enhancements, such as the MoPac Improvement Project, further disrupts flow by reducing lane availability and creating merge bottlenecks at interchanges like those with US 183 and SH 71.[57] Key metrics highlight the severity: Texas Department of Transportation (TxDOT) data ranks multiple Loop 1 segments among the state's most congested, measuring congestion via extra travel delay hours derived from volume and speed analytics. For instance, the 3.93-mile segment from US 290/SH 71 to RM 1826 on southbound MoPac recorded substantial delay in 2023 rankings, contributing to statewide totals where Austin corridors dominate the top lists.[58][59] Peak-period travel times on southern stretches have shown increasing severity, with 2019 analyses indicating heightened delays during rush hours, and projections estimating a 42% rise in south Austin MoPac travel times by 2045 absent further interventions.[60][61] Commuters often face 40-60 minute delays for 25-mile trips during peaks, reflecting a Texas Congestion Index exceeding 1.9 on affected segments.[62][2]

Economic and regional impacts

Facilitation of urban growth and commerce

The development of Texas State Highway Loop 1, known as the MoPac Expressway, in the 1960s and 1970s provided a critical north-south corridor on Austin's west side, connecting suburban areas to downtown and enabling commuter access from emerging residential neighborhoods.[6] Construction phases, culminating in the northern extension to US 183 by 1982, supported the decentralization of housing and initial commercial nodes by reducing reliance on congested arterials like Bee Caves Road.[9] This infrastructure lowered transportation costs for workers and goods, fostering early suburban expansion amid Austin's post-war population growth from approximately 187,000 in 1960 to over 345,000 by 1980.[63] Along the MoPac corridor, improved connectivity spurred retail and office developments, with the highway serving as a vital link for businesses accessing downtown and intersecting routes like US 290 and Loop 360.[64] In recent years, the South MoPac area has emerged as a bright spot in Austin's office market, exhibiting lower vacancy rates due to its proximity to central business districts and appeal to tenants seeking efficient access.[65] Commercial real estate along the route has benefited from the artery's role in linking residential hubs to employment centers, contributing to sustained investment despite broader market challenges.[55] Loop 1's capacity as an alternative to Interstate 35 has underpinned regional commerce by facilitating the flow of visitors, commuters, and freight to northwest Austin's tech and retail districts, such as those near The Domain, where major firms like Amazon and Facebook established operations.[66] The Greater Austin Chamber of Commerce has historically advocated for MoPac enhancements, viewing them as essential for accommodating business expansion and maintaining economic vitality in a rapidly growing metro area.[67] Empirical patterns show corridor-adjacent development in residential, retail, and commercial sectors correlating with the highway's maturation, though subsequent congestion highlights induced demand from enabled growth.[68]

Empirical benefits versus costs

The MoPac Improvement Project, which added one managed express lane in each direction along an 11-mile segment of Loop 1 from Cesar Chavez Street to Parmer Lane, incurred a total cost of approximately $233 million upon completion in late 2017, encompassing construction, design, and ancillary expenses such as asbestos abatement.[35] [33] Ongoing operational and maintenance costs for the express lanes are covered through variable toll revenues, which averaged values supporting daily user benefits equivalent to collected tolls.[69] Quantifiable benefits include enhanced vehicle speeds averaging 8 mph higher on express lanes relative to general-purpose lanes across 61 analyzed days, yielding daily fuel consumption reductions of 8,677 gallons (gas equivalent) and greenhouse gas emissions cuts of 190,201 pounds of CO₂, alongside decreases in CO (647 pounds), NOx (121 pounds), and VOCs (31 pounds).[69] Peak-period savings were most pronounced, with weekday AM reductions of 10-15% and PM reductions of 15-20% in fuel use.[69] Travel time reliability improved for toll users, with express lanes providing up to 25 minutes of savings and speeds 21 mph faster than adjacent lanes during congestion.[70] These mobility gains support broader economic productivity by serving over 180,000 daily vehicles on Loop 1, projected to reach 220,000, thereby reducing delays for commuters and freight accessing Austin's commercial hubs.[21] However, empirical assessments indicate that while user-valued time savings (estimated at $8-10 per trip) offset tolls for many, general-purpose lane congestion persists due to induced demand, limiting non-toll benefits.[71] No comprehensive public cost-benefit ratio exceeding unity has been released by the Central Texas Regional Mobility Authority or TxDOT for the project, though component analyses affirm positive returns in emissions and speed metrics.[69]

Controversies and debates

Expansion opposition and regulatory delays

Opposition to expansions of Loop 1, known as the MoPac Expressway, has primarily come from environmental advocacy groups and neighborhood associations concerned with ecological disruption, air and water quality degradation, and impacts on local landmarks and schools. Groups such as the Save Our Springs Alliance and Zilker Neighborhood Association have argued that proposed widenings would exacerbate flooding risks, harm karst aquifers, and increase pollution near sensitive areas like Lady Bird Lake and Austin High School.[72] These claims have often invoked induced demand theory, positing that additional lanes attract more vehicles without net congestion relief, though empirical studies on similar managed lane projects elsewhere indicate variable outcomes dependent on pricing and enforcement efficacy.[73] The MoPac Improvement Project, which reconstructed central segments and added managed express lanes operational since January 2017, encountered early protests in May 2015 against toll implementation and a proposed flyover ramp near Lady Bird Lake, with demonstrators highlighting potential habitat fragmentation and visual blight.[74] While the project secured environmental clearances under the National Environmental Policy Act (NEPA), subsequent construction phases faced delays from unmarked utilities and bedrock excavation, extending timelines beyond initial estimates and amplifying public frustration.[75] Regulatory hurdles were minimal compared to later proposals, as approvals predated heightened scrutiny, but opposition contributed to iterative design revisions. The MoPac South expansion, envisioning four to six additional lanes including toll facilities from north of Lady Bird Lake to Slaughter Lane, has endured over a decade of regulatory stasis since initial 2013 proposals. A 2016 federal lawsuit by environmentalists sought to halt it over inadequate environmental review, alleging insufficient analysis of aquifer recharge and flood risks, though the suit failed.[52] Further delays stemmed from the COVID-19 pandemic, political shifts, and community pushback, with the Central Texas Regional Mobility Authority (CTRMA) pausing active pursuit from 2015 onward.[76] In April 2025, Save Our Springs Alliance filed suit against CTRMA for withholding hydrological and ecological data essential for impact assessments, demanding transparency in NEPA compliance.[77] As of December 2024, the project remains in public comment phases under an Environmental Assessment (EA) rather than a full Environmental Impact Statement (EIS), with activists pressing for the latter to address cumulative effects on endangered species habitats and urban tree canopy loss.[78] Austin City Council passed a resolution on December 16, 2024, urging CTRMA to revise plans amid over 1,200 public comments, many opposing the scale and advocating alternatives like transit enhancements.[79] These regulatory entanglements, including mandatory interagency coordination and litigation risks, have prevented groundbreaking, contrasting with faster approvals for non-controversial infrastructure elsewhere in Texas.[80]

Toll equity and induced demand claims

Critics of the MoPac Express Lanes, implemented along Loop 1 from Cesar Chavez Street to Parmer Lane starting in 2017, have argued that variable toll pricing constitutes a regressive tax, disproportionately affecting lower-income residents who rely on the corridor for essential commutes but may lack the means to pay rates that can exceed $10 during peak hours.[81][82] Public input during the MoPac South environmental study highlighted this concern, asserting that tolls impose financial barriers on those unable to opt for slower general-purpose lanes, potentially exacerbating inequities in access to reliable mobility.[81] Travis County commissioners have similarly criticized proposed extensions, questioning the fairness of tolling mechanisms that generate revenue primarily from users while general lanes remain congested for non-payers.[83] Proponents, including the Central Texas Regional Mobility Authority (CTRMA), counter that the lanes offer a voluntary premium service, preserving free general-purpose lanes for all users and using toll revenue—approximately $28 million collected in the first 21 months post-opening—for maintenance, operations, and regional improvements without relying on general taxes.[84][4] Variable pricing dynamically adjusts to demand, ensuring express lane speeds remain above 45 mph even during heavy traffic, which empirical data from the existing 11-mile segment shows has reduced overall travel times and increased transit bus reliability without eliminating free options.[85] General analyses of congestion pricing note that while tolls can appear regressive in isolation, time savings benefit a broad user base, and strategies like revenue redistribution for low-income transit subsidies can mitigate disparities, though no MoPac-specific income-usage study has been publicly detailed.[86] Regarding induced demand, opposition groups such as Keep MoPac Local and the Save Our Springs Alliance contend that capacity expansions along Loop 1, even with tolls, will attract additional vehicle miles traveled, filling new lanes and perpetuating congestion as observed in broader highway patterns, thereby undermining projected relief from projects like MoPac South.[73][87] They cite the phenomenon where improved flow encourages longer commutes and development sprawl, with public comments during planning asserting that historical data shows traffic volumes rising to match added capacity regardless of pricing.[81] A 2017 analysis post-initial improvements noted increased usage as evidence of this effect, with more drivers shifting to MoPac due to perceived reliability.[88] CTRMA evaluations of the operational express lanes indicate that dynamic tolling effectively curbs excess demand by rationing access, maintaining free-flow conditions and averting the full induced demand predicted in untolled expansions, as supported by speed and volume data showing consistent performance since 2017.[4] Broader research on managed lanes suggests induced travel elasticities are lower (around 0.2-0.5) for priced facilities compared to free additions (0.4-1.0), implying tolls convert latent demand into revenue rather than unchecked volume growth.[89] Critics of blanket induced demand invocations argue it overlooks pricing's role in internalizing congestion costs, with MoPac's model demonstrating causal control over throughput via real-time adjustments.[90]

References

  1. STATE HIGHWAY LOOP NO. 1 - Texas Department of Transportation
  2. [PDF] LOOP 1 (MoPac) - Austin
  3. How did Austin's MoPac Expressway get its name?
  4. MoPac Express Lane | Central Texas Regional Mobility Authority
  5. MoPac South - Texas Department of Transportation
  6. When a loop is not a loop: MoPac's history, mystery and misery
  7. Project History | MoPac South Environmental Study
  8. [PDF] The History of MoPac - Central Texas Regional Mobility Authority
  9. [PDF] Frequently Asked Questions about the Mopac 1 Project
  10. A new tolled highway brings change for Austin, Texas
  11. 290 Toll | Central Texas Regional Mobility Authority
  12. Loop 1 - Mopac MoPac Expressway Texas - AARoads
  13. Mark your calendar: Rest of northbound MoPac toll lane to open Oct. 7
  14. Take a ride in the new southbound MoPac Express Lane opening ...
  15. Toll roads in Texas - Texas Department of Transportation
  16. Loop 1 North - MoPac Expressway Texas - AARoads
  17. [PDF] #4 #3 #2 #1 - MoPac South
  18. Loop 1 South - MoPac Expressway Texas - AARoads
  19. Texas State Highway Loop 1 - AARoads Wiki
  20. [PDF] Central Texas Toll Road Map
  21. Loop 1 Extensions Toll Road Complete Guide: MoPac, Rates &amp
  22. Most Dangerous Highways in Austin - Loewy Law Firm
  23. Most Common Roads for Car Accidents In Austin - FVF Law
  24. Austin Truck Accident Hotspots: 5 Intersections to Avoid
  25. Austin Highway Emergency Response Operator (HERO) Roadside ...
  26. [PDF] 2024 Annual Report of Conditions: MoPac Express Lane
  27. [PDF] EXPRESS 1 TOLL - Central Texas Regional Mobility Authority
  28. [PDF] general meeting of the board of directors
  29. [PDF] Central Texas Turnpike System
  30. Project Profile: Central Texas Turnpike System
  31. 1M already use Austin toll roads daily, and it could double by 2040
  32. [PDF] Central Texas Turnpike System
  33. [PDF] AGENDA ITEM #11 SUMMARY
  34. MoPac improvement project - Texas Department of Transportation
  35. FINAL TAB: Here's what four years of MoPac construction will end ...
  36. [PDF] Progress By the Numbers - 183 North Mobility Project
  37. Project Overview | MoPac South Environmental Study
  38. MoPac Intersections - Texas Department of Transportation
  39. TxDOT Builds a Rare Diverging Diamond
  40. Design, Ground Conditions Test on Austin Interchange | 2019-12-09
  41. [PDF] Final Environmental Assessment
  42. [PDF] MoPac Intersections - Slaughter Lane & La Crosse Avenue
  43. Webber Awarded $53M Highway Underpass Construction in Travis ...
  44. MoPac projects at Slaughter Lane, La Crosse Ave. completed
  45. TxDOT Unwraps Completed MoPac Intersections Project
  46. TxDOT Continues Work to Improve Safety Along MoPac : CEG
  47. MoPac South Environmental Study
  48. Projects - Central Texas Regional Mobility Authority
  49. Austin - Texas Department of Transportation
  50. South MoPac toll expansion set as priority for next fiscal year by ...
  51. New renderings for MoPac South Project released | KXAN Austin
  52. Proposal to add toll lanes along MoPac through South Austin now ...
  53. [PDF] MoPac South TWG Update July 2025
  54. Residents explore possibility of more express lanes on MoPac - KVUE
  55. Along the MoPac Corridor - Roads and Bridges
  56. The Busiest Roads and Highways in Austin, TX
  57. [PDF] 100 Most Congested Roadways in Texas 2020 Summary
  58. [PDF] 2024 Texas 100 Most Congested Road Segments - All Vehicles
  59. Texas “Top 100” Congested Road Segments
  60. [PDF] MoPac Expressway Metropia Data Analysis
  61. New study shows traffic times on MoPac in South Austin ... - KVUE
  62. Austin Traffic Reality Check: Commute Times and Tips for Suburbs
  63. A Short History of Austin's Economic Development
  64. Proposed Mopac South Expansion - Westlake Chamber of Commerce
  65. South MoPac corridor is a bright spot in Austin's office market
  66. Northwest Austin's Second Downtown Is Home to Tech Offices Old ...
  67. Wear: South MoPac lane spat bringing back aquifer war of the 1990s
  68. Project Overview | MoPac South Environmental Study
  69. [PDF] MoPac Express Lanes Energy-Emissions Analysis
  70. MoPac express lane saves travelers up to 25 minutes of driving time
  71. [PDF] MoPac Express Lane: - IBTTA
  72. SOS Sues CTRMA for Withholding Critical Data on MoPac South ...
  73. Detailed Project Summary | Keep Mopac Local
  74. Protesters rally against proposed MoPac express lanes | kvue.com
  75. MoPac? More Like SlowPac! Persistent Delays Plague Improvement ...
  76. MoPac expansion in South Austin? TxDOT wants community's input
  77. Save Our Springs sues CTRMA over withheld data on MoPac South ...
  78. https://www.austinmonitor.com/stories/2024/12/council-calls-for-revisions-for-proposed-mopac-south-expansion/
  79. Over 1,200 comments received for proposed new toll lanes on ...
  80. MoPac South Expansion sees, yet another, delay - CBS Austin
  81. [PDF] Attachment A e-Newsletter & Emails - MoPac South
  82. 'Evil MoPac' app tells Austin drivers if tolls are worth it - KUT News
  83. Travis County commissioners tear into MoPac South toll lane project
  84. Where $28M in MoPac Express tolls are going - CBS Austin
  85. https://www.mopacsouth.com/
  86. [PDF] A Review of the Application of Congestion Pricing Final Report
  87. SOS Comments on Mopac South Project ~ TAKE ACTION
  88. Wear: Was all the MoPac suffering worth it? Look for an answer this ...
  89. [PDF] Roadway Capacity and Induced Travel
  90. Examining Claims About Induced Demand, Adding Road Capacity ...
User Avatar
No comments yet.