Community hub
Recent from talks
Contribute something to knowledge base
Content stats: 0 posts, 0 articles, 0 media, 0 notes
Members stats: 0 subscribers, 0 contributors, 0 moderators, 0 supporters
Subscribers
Supporters
Contributors
Moderators
Hub AI
CNP / ACP nuclear reactors AI simulator
(@CNP / ACP nuclear reactors_simulator)
Hub AI
CNP / ACP nuclear reactors AI simulator
(@CNP / ACP nuclear reactors_simulator)
CNP / ACP nuclear reactors
The CNP Generation II nuclear reactors (and Generation III successor ACP) were a series of nuclear reactors developed by China National Nuclear Corporation (CNNC), and are predecessors of the more current Hualong One design.
The CNP-300 is a pressurized water nuclear reactor developed by the China National Nuclear Corporation (CNNC).
It is China's first domestic commercial nuclear reactor design, with development beginning in the 1970s based on a nuclear submarine reactor design.
The reactor has a thermal capacity of 999 MW and a gross electrical capacity of 325 MW, with a net output of about 300 MWe and a single-loop design and .
The first CNP-300 unit started operations in Qinshan Nuclear Power Plant in 1991.
The CNP-300 was the first Chinese nuclear reactor to be exported, with the installation of the first unit at Chashma Nuclear Power Plant in Pakistan. The unit began operation in 2000. Another unit was completed in 2011 and two more units began operation in 2016 and 2017 at the same plant.
The CNP-600 is a generation II reactor pressurized water nuclear reactor developed by the China National Nuclear Corporation (CNNC).
It is based both on China's first commercial domestic nuclear reactor design, the CNP-300 and the M310 reactor design used in Daya Bay Nuclear Power Plant.
CNP / ACP nuclear reactors
The CNP Generation II nuclear reactors (and Generation III successor ACP) were a series of nuclear reactors developed by China National Nuclear Corporation (CNNC), and are predecessors of the more current Hualong One design.
The CNP-300 is a pressurized water nuclear reactor developed by the China National Nuclear Corporation (CNNC).
It is China's first domestic commercial nuclear reactor design, with development beginning in the 1970s based on a nuclear submarine reactor design.
The reactor has a thermal capacity of 999 MW and a gross electrical capacity of 325 MW, with a net output of about 300 MWe and a single-loop design and .
The first CNP-300 unit started operations in Qinshan Nuclear Power Plant in 1991.
The CNP-300 was the first Chinese nuclear reactor to be exported, with the installation of the first unit at Chashma Nuclear Power Plant in Pakistan. The unit began operation in 2000. Another unit was completed in 2011 and two more units began operation in 2016 and 2017 at the same plant.
The CNP-600 is a generation II reactor pressurized water nuclear reactor developed by the China National Nuclear Corporation (CNNC).
It is based both on China's first commercial domestic nuclear reactor design, the CNP-300 and the M310 reactor design used in Daya Bay Nuclear Power Plant.