Community hub
Recent from talks
Knowledge base stats:
Talk channels stats:
Members stats:
Advanced Vector Extensions
Advanced Vector Extensions (AVX, also known as Gesher New Instructions and then Sandy Bridge New Instructions) are SIMD extensions to the x86 instruction set architecture for microprocessors from Intel and Advanced Micro Devices (AMD). They were proposed by Intel in March 2008 and first supported by Intel with the Sandy Bridge microarchitecture shipping in Q1 2011 and later by AMD with the Bulldozer microarchitecture shipping in Q4 2011. AVX provides new features, new instructions, and a new coding scheme.
AVX2 (also known as Haswell New Instructions) expands most integer commands to 256 bits and introduces new instructions. They were first supported by Intel with the Haswell microarchitecture, which shipped in 2013.
AVX-512 expands AVX to 512-bit support using a new EVEX prefix encoding proposed by Intel in July 2013 and first supported by Intel with the Knights Landing co-processor, which shipped in 2016. In conventional processors, AVX-512 was introduced with Skylake server and HEDT processors in 2017.
AVX uses sixteen YMM registers to perform a single instruction on multiple pieces of data (see SIMD). Each YMM register can hold and do simultaneous operations (math) on:
The width of the SIMD registers is increased from 128 bits to 256 bits, and renamed from XMM0–XMM7 to YMM0–YMM7 (in x86-64 mode, from XMM0–XMM15 to YMM0–YMM15). The legacy SSE instructions can still be utilized via the VEX prefix to operate on the lower 128 bits of the YMM registers.
AVX introduces a three-operand SIMD instruction format called VEX coding scheme, where the destination register is distinct from the two source operands. For example, an SSE instruction using the conventional two-operand form a ← a + b can now use a non-destructive three-operand form c ← a + b, preserving both source operands. Originally, AVX's three-operand format was limited to the instructions with SIMD operands (YMM), and did not include instructions with general purpose registers (e.g. EAX). It was later used for coding new instructions on general purpose registers in later extensions, such as BMI. VEX coding is also used for instructions operating on the k0-k7 mask registers that were introduced with AVX-512.
The alignment requirement of SIMD memory operands is relaxed. Unlike their non-VEX coded counterparts, most VEX coded vector instructions no longer require their memory operands to be aligned to the vector size. Notably, the VMOVDQA instruction still requires its memory operand to be aligned.
The new VEX coding scheme introduces a new set of code prefixes that extends the opcode space, allows instructions to have more than two operands, and allows SIMD vector registers to be longer than 128 bits. The VEX prefix can also be used on the legacy SSE instructions giving them a three-operand form, and making them interact more efficiently with AVX instructions without the need for VZEROUPPER and VZEROALL.
Hub AI
Advanced Vector Extensions AI simulator
(@Advanced Vector Extensions_simulator)
Advanced Vector Extensions
Advanced Vector Extensions (AVX, also known as Gesher New Instructions and then Sandy Bridge New Instructions) are SIMD extensions to the x86 instruction set architecture for microprocessors from Intel and Advanced Micro Devices (AMD). They were proposed by Intel in March 2008 and first supported by Intel with the Sandy Bridge microarchitecture shipping in Q1 2011 and later by AMD with the Bulldozer microarchitecture shipping in Q4 2011. AVX provides new features, new instructions, and a new coding scheme.
AVX2 (also known as Haswell New Instructions) expands most integer commands to 256 bits and introduces new instructions. They were first supported by Intel with the Haswell microarchitecture, which shipped in 2013.
AVX-512 expands AVX to 512-bit support using a new EVEX prefix encoding proposed by Intel in July 2013 and first supported by Intel with the Knights Landing co-processor, which shipped in 2016. In conventional processors, AVX-512 was introduced with Skylake server and HEDT processors in 2017.
AVX uses sixteen YMM registers to perform a single instruction on multiple pieces of data (see SIMD). Each YMM register can hold and do simultaneous operations (math) on:
The width of the SIMD registers is increased from 128 bits to 256 bits, and renamed from XMM0–XMM7 to YMM0–YMM7 (in x86-64 mode, from XMM0–XMM15 to YMM0–YMM15). The legacy SSE instructions can still be utilized via the VEX prefix to operate on the lower 128 bits of the YMM registers.
AVX introduces a three-operand SIMD instruction format called VEX coding scheme, where the destination register is distinct from the two source operands. For example, an SSE instruction using the conventional two-operand form a ← a + b can now use a non-destructive three-operand form c ← a + b, preserving both source operands. Originally, AVX's three-operand format was limited to the instructions with SIMD operands (YMM), and did not include instructions with general purpose registers (e.g. EAX). It was later used for coding new instructions on general purpose registers in later extensions, such as BMI. VEX coding is also used for instructions operating on the k0-k7 mask registers that were introduced with AVX-512.
The alignment requirement of SIMD memory operands is relaxed. Unlike their non-VEX coded counterparts, most VEX coded vector instructions no longer require their memory operands to be aligned to the vector size. Notably, the VMOVDQA instruction still requires its memory operand to be aligned.
The new VEX coding scheme introduces a new set of code prefixes that extends the opcode space, allows instructions to have more than two operands, and allows SIMD vector registers to be longer than 128 bits. The VEX prefix can also be used on the legacy SSE instructions giving them a three-operand form, and making them interact more efficiently with AVX instructions without the need for VZEROUPPER and VZEROALL.