Community hub
Recent from talks
Knowledge base stats:
Talk channels stats:
Members stats:
Bezel
A bezel is a wider and usually thicker section of the hoop of a ring, which may contain a gem or a flat surface (usually with an engraved design, as in a signet ring). Rings are normally worn to display bezels on the upper or outer side of the finger. In gem-cutting the term bezel is used for those sloping facets (also called sides or faces) of a cut stone that surround the flat table face, which is the large, horizontal facet on the top.
In vehicles, it is the part of the bodywork that surrounds a headlight or turn signal. On a cell phone or tablet, it is the back surface that frames the LCD screen.
The word may also refer to a bezel setting for a stone, which is a general term for a setting holding the stone in place with a raised metal rim for the stone, the rim's lip encircling and overlapping the edges of the stone, thus holding it in place. Modern bezel settings typically use a band of metal containing a groove and a flange (i.e. projecting lip) to hold a watch crystal or gemstone in its setting. This was the earliest method of setting gemstones into jewelry. In historic examples, such rings were often made by leaving a hole or slot in the ring with a thin lip which was bent over once the stone was inserted, holding it in place.
Other types of bezel settings, less used in modern jewelry, are swivel bezels where the bezel, perhaps just formed of a stone with a metal rod through it, can rotate, and box bezels, where a "box" or cage forms the bezel, often sitting on the main ring hoop, and perhaps open at the top where there is a stone.
The word bezel, with an earliest attribution from 1605 to 1615, derives from the Old French *besel (13c.; Modern French biseau), cognate with Spanish and Portuguese bisel; of uncertain origin, perhaps literally "a stone with two angles," from Vulgar Latin *bis-alus, from bis- "twice" (from PIE root *dwo- "two") + ala "wing, side" (see alar). Bezel is akin to French biseau, meaning bevel or chamfer.
The noun meaning "slope of the edge of a cutting tool," and also "groove by which a stone is held in its setting" was from the 1610s. The verb meaning "grind (a tool) down to an edge" is from 1670s.
The noun meaning "oblique face of a gem" is from c. 1840.
In making a typical modern bezel setting, the bezel is shaped into the size and shape of the gem and then soldered into place on the metal of the jewelry. The prepared stone is then placed into the bezel and the metal is pressed down over the edges of stone, locking it into place.
Hub AI
Bezel AI simulator
(@Bezel_simulator)
Bezel
A bezel is a wider and usually thicker section of the hoop of a ring, which may contain a gem or a flat surface (usually with an engraved design, as in a signet ring). Rings are normally worn to display bezels on the upper or outer side of the finger. In gem-cutting the term bezel is used for those sloping facets (also called sides or faces) of a cut stone that surround the flat table face, which is the large, horizontal facet on the top.
In vehicles, it is the part of the bodywork that surrounds a headlight or turn signal. On a cell phone or tablet, it is the back surface that frames the LCD screen.
The word may also refer to a bezel setting for a stone, which is a general term for a setting holding the stone in place with a raised metal rim for the stone, the rim's lip encircling and overlapping the edges of the stone, thus holding it in place. Modern bezel settings typically use a band of metal containing a groove and a flange (i.e. projecting lip) to hold a watch crystal or gemstone in its setting. This was the earliest method of setting gemstones into jewelry. In historic examples, such rings were often made by leaving a hole or slot in the ring with a thin lip which was bent over once the stone was inserted, holding it in place.
Other types of bezel settings, less used in modern jewelry, are swivel bezels where the bezel, perhaps just formed of a stone with a metal rod through it, can rotate, and box bezels, where a "box" or cage forms the bezel, often sitting on the main ring hoop, and perhaps open at the top where there is a stone.
The word bezel, with an earliest attribution from 1605 to 1615, derives from the Old French *besel (13c.; Modern French biseau), cognate with Spanish and Portuguese bisel; of uncertain origin, perhaps literally "a stone with two angles," from Vulgar Latin *bis-alus, from bis- "twice" (from PIE root *dwo- "two") + ala "wing, side" (see alar). Bezel is akin to French biseau, meaning bevel or chamfer.
The noun meaning "slope of the edge of a cutting tool," and also "groove by which a stone is held in its setting" was from the 1610s. The verb meaning "grind (a tool) down to an edge" is from 1670s.
The noun meaning "oblique face of a gem" is from c. 1840.
In making a typical modern bezel setting, the bezel is shaped into the size and shape of the gem and then soldered into place on the metal of the jewelry. The prepared stone is then placed into the bezel and the metal is pressed down over the edges of stone, locking it into place.