Community hub
Recent from talks
Contribute something to knowledge base
Content stats: 0 posts, 0 articles, 0 media, 0 notes
Members stats: 0 subscribers, 0 contributors, 0 moderators, 0 supporters
Subscribers
Supporters
Contributors
Moderators
Hub AI
Dallara F3 cars AI simulator
(@Dallara F3 cars_simulator)
Hub AI
Dallara F3 cars AI simulator
(@Dallara F3 cars_simulator)
Dallara F3 cars
The Dallara F3 cars are open-wheel formula racing car, designed, developed and built by Italian manufacturer Dallara, for Formula Three categories.
The Dallara F302 was designed in 2002.
The Dallara F305 was built in 2005. It became upgradable with aero kits, and its evolutions became known as the F306 and the F307, in 2006 and 2007, respectively.
The Dallara F308 was built in 2008. It was used in different Formula Three racing categories and competitions between 2008 and 2011. It was later replaced and succeeded by the F312, in 2012.
The F308 can be upgraded to either the F309, the F310, or the F311, through Dallara's annual add-on kits. These include modifications in the area of aerodynamics such as additional air deflectors or similar or improved suspension units.
The F308 is a conventional Formula 3 racing car with a carbon fiber reinforced plastic monocoque, load-bearing mid-engined, and free-standing wheels. The Hewland FTR and the Pankl DGB03 gearbox are homologated for the car. It is shifted manually by means of ignition interruption and shift lever on the right side without the clutch. The front and rear wing elements, the front, and rear crash boxes, and the wheel carriers are also homologated. The bodywork can be done by the teams themselves. For example, the chimneys on the sidepods were removed from all teams in the Euroseries and the sidepods were laminated shut.
The Dallara F312 proved to be one of the most popular Formula 3 Chassis ever, with over 53 of the original type having been produced. Even after its successor the Dallara F317 was introduced, the F312 remained widely used, in championships such as the Euroformula Open Championship and the Japanese Formula 3 Championship.
The Dallara F312 was designed to meet the new for 2012 FIA Formula 3 regulations, which were much more restrictive compared to previous Formula 3 regulations, and led to reduced downforce levels. Compared to the previous generation Dallara F308, the 312 features a higher monocoque and a lower nose-section than the outgoing model, with the front dampers and springs being placed inside the tub, a first for a Dallara F3 car, alongside a revised aerodynamic package. The car was unveiled at the Masters of Formula 3 event on the 20th of October 2011 at Circuit Zandvoort, in the Netherlands.
Dallara F3 cars
The Dallara F3 cars are open-wheel formula racing car, designed, developed and built by Italian manufacturer Dallara, for Formula Three categories.
The Dallara F302 was designed in 2002.
The Dallara F305 was built in 2005. It became upgradable with aero kits, and its evolutions became known as the F306 and the F307, in 2006 and 2007, respectively.
The Dallara F308 was built in 2008. It was used in different Formula Three racing categories and competitions between 2008 and 2011. It was later replaced and succeeded by the F312, in 2012.
The F308 can be upgraded to either the F309, the F310, or the F311, through Dallara's annual add-on kits. These include modifications in the area of aerodynamics such as additional air deflectors or similar or improved suspension units.
The F308 is a conventional Formula 3 racing car with a carbon fiber reinforced plastic monocoque, load-bearing mid-engined, and free-standing wheels. The Hewland FTR and the Pankl DGB03 gearbox are homologated for the car. It is shifted manually by means of ignition interruption and shift lever on the right side without the clutch. The front and rear wing elements, the front, and rear crash boxes, and the wheel carriers are also homologated. The bodywork can be done by the teams themselves. For example, the chimneys on the sidepods were removed from all teams in the Euroseries and the sidepods were laminated shut.
The Dallara F312 proved to be one of the most popular Formula 3 Chassis ever, with over 53 of the original type having been produced. Even after its successor the Dallara F317 was introduced, the F312 remained widely used, in championships such as the Euroformula Open Championship and the Japanese Formula 3 Championship.
The Dallara F312 was designed to meet the new for 2012 FIA Formula 3 regulations, which were much more restrictive compared to previous Formula 3 regulations, and led to reduced downforce levels. Compared to the previous generation Dallara F308, the 312 features a higher monocoque and a lower nose-section than the outgoing model, with the front dampers and springs being placed inside the tub, a first for a Dallara F3 car, alongside a revised aerodynamic package. The car was unveiled at the Masters of Formula 3 event on the 20th of October 2011 at Circuit Zandvoort, in the Netherlands.