The drop is an approximated unit of measure of volume, the amount dispensed as one drop from a dropper or drip chamber. It is often used in giving quantities of liquid drugs to patients, and occasionally in cooking and in organic synthesis. The abbreviations gt or gtt come from the Latin noun gutta ("drop").
The volume of a drop is not well defined: it depends on the device and technique used to produce the drop, on the strength of the gravitational field, and on the viscosity, density, and the surface tension of the liquid.[1]
Several exact definitions exist:
| 1 US customary drop | = | 5/6 | US customary minim |
| = | 1/72 | US customary fluid dram | |
| = | 1/288 | US customary tablespoon | |
| = | 1/192 | US customary dessert spoon | |
| = | 1/96 | US customary teaspoon | |
| = | 1/48 | US customary coffee spoon | |
| = | 1/24 | US customary salt spoon | |
| ≈ | 0·87 | British imperial minim | |
| ≈ | 0·0036 | UK tablespoon | |
| ≈ | 0·0072 | UK dessert spoon | |
| ≈ | 0·014 | UK teaspoon | |
| ≈ | 0·029 | UK salt spoon | |
| ≈ | 0·87 | UK drop | |
| ≈ | 0·051 | millilitre | |
| ≈ | 0·0034 | international metric tablespoon | |
| ≈ | 0·0026 | Australian metric tablespoon | |
| ≈ | 0·0051 | metric dessert spoon | |
| ≈ | 0·01 | metric teaspoon |
| 1 UK drop | = | 1 | British imperial minim |
| = | 1/60 | British imperial fluid drachm | |
| = | 1/240 | UK tablespoon | |
| = | 1/120 | UK dessert spoon | |
| = | 1/60 | UK teaspoon | |
| = | 1/30 | UK salt spoon | |
| = | 1/480 | British imperial fluid ounce | |
| ≈ | 0·96 | US customary minims | |
| ≈ | 0·016 | US customary fluid dram | |
| ≈ | 0·004 | US customary tablespoon | |
| ≈ | 0·006 | US customary dessert spoon | |
| ≈ | 0·012 | US customary teaspoon | |
| ≈ | 0·024 | US customary coffee spoon | |
| ≈ | 0·048 | US customary salt spoon | |
| ≈ | 1·15 | US customary drops | |
| ≈ | 0·059 | millilitre | |
| ≈ | 0·0039 | international metric tablespoon | |
| ≈ | 0·003 | Australian metric tablespoon | |
| ≈ | 0·006 | metric dessert spoon | |
| ≈ | 0·012 | metric teaspoon |
In organic synthesis, a synthetic procedure will often call for the addition of a reagent "dropwise" with the aid of a syringe or a dropping funnel. The rate of addition for such a procedure is taken to be slow but is otherwise vague: one chemist might consider dropwise to be one drop per second, another five to ten drops per second (almost a stream). Furthermore, needle gauge or the dimensions of the glassware also affect drop volume. To improve reproducibility, experimental procedures also note the total amount of time required to add the liquid or another measure of addition rate. In a related usage, the amount of a reagent, whose precise quantity is unimportant, will sometimes be given in terms of the number of drops, often from a glass pipette. In this usage, a drop is typically considered to be approximately 0.05 mL. The practice of giving quantities this way has declined in usage.
In the first decade of the 19th century, the minim, the smallest unit of Apothecary Measure, was promoted by the pharmaceutical and medical establishments as an alternative to the drop.[4] It was noted that the size of a drop can vary considerably depending on the viscosity and specific gravity of the fluid, as well as the size and shape of the vessel from which it is poured. (At the time, surface tension was not well understood.) The minim came with a set of procedures for ensuring accurate measurement, specifically, diluting powerful medicines that had previously been measured by the drop, then using a "minimometer" or "minim glass" (graduated pipette) with minim marks at regular intervals. The minim was defined as one 60th of a fluid dram or one 480th of a fluid ounce.[5] This is equal to about 61.6 μL (U.S.) or 59.2 μL (Britain).
Pharmacists have since moved to metric measurements, with a drop being rounded to exactly 0.05 mL (50 μL, that is, 20 drops per milliliter). In hospitals, intravenous tubing is used to deliver medication in drops of various sizes ranging from 10 drops/mL to 60 drops/mL. A drop is abbreviated gtt, with gtts used for the plural, often seen on prescriptions.[6] Other sources abbreviate gt for singular, and gtt for plural.[7][8] These abbreviations come from gutta (plural guttae), the Latin word for drop.[9][6]
wikipedians
This is the start of the #wikipedians chat. #wikipedians — chat for Wikipedians about leveraging the hub to improve its root Wikipedia article.
