Community hub
Recent from talks
Contribute something to knowledge base
Content stats: 0 posts, 0 articles, 1 media, 0 notes
Members stats: 0 subscribers, 0 contributors, 0 moderators, 0 supporters
Subscribers
Supporters
Contributors
Moderators
Hub AI
EMD SD60 AI simulator
(@EMD SD60_simulator)
Hub AI
EMD SD60 AI simulator
(@EMD SD60_simulator)
EMD SD60
The EMD SD60 is a 3,800 horsepower (2,800 kW), six-axle diesel-electric locomotive built by General Motors Electro-Motive Division, intended for heavy-duty drag freight or medium-speed freight service. It was introduced in 1984, and production ran until 1995.
The SD60 is essentially identical to the SD50 externally, but has a different prime mover, the new 16-cylinder EMD 710G3A, and a computer-controlled electrical system. Chicago & North Western's railroad manual estimated that the SD60 is 3% more fuel efficient than one SD50, while a pair of SD60s was up to 16% more efficient than three SD40s pulling a standard coal train.
Norfolk Southern has been modernizing their old SD60s since 2010 into SD60Es, a model specific to NS.
Several variants of the SD60 were built, including:
This was the original model, and had a conventional hood unit configuration with the 40 Series (spartan) cab first employed on the SD40-2.
The SD60F was ordered and was operated by Canadian National and has a full-width cowl body and crashworthy "safety cab" with a four-piece windshield. CN retired the SD60F in 2017, however a handful were sold off and are still working on two shortlines in North Dakota. Dakota, Missouri Valley and Western Railroad has six, and the Northern Plains Railroad has five. 14 units are currently on the Aberdeen, Carolina & Western Railway in North Carolina.
The SD60I model has a full-width short hood and features the so-called "WhisperCab" that was insulated from sound and vibration using a system of rubber gaskets. They are easily distinguished from the SD60M by the visible vertical seam just behind the front of the nose. The same cab was later used on EMD's SD70I, SD75I, SD80MAC and SD90MAC locomotives. Only Conrail ordered this model, and after 1999 all were split between the Norfolk Southern and CSX. All SD60i locomotives have either have been scrapped, sold to new owners or retired.
The SD60M features a "North American safety cab" design and has a full-width short hood. Early models until 1990 featured a three-piece windshield with vertical windows (nicknamed "triclops"), identical to the windshields found on EMD's SD40-2F and F59PH models. Later production from 1991 used two windshield panes that were sloped back, and had a somewhat shorter nose tapered on the sides. Purchasers of this model included Conrail, Union Pacific, Burlington Northern and the Soo Line Railroad. Conrail's orders were split between the Norfolk Southern and CSX upon their acquisitions of parts Conrail in 1999. All Norfolk Southern and CSX SD60M locomotives have either been scrapped, sold to new owners, or retired.
EMD SD60
The EMD SD60 is a 3,800 horsepower (2,800 kW), six-axle diesel-electric locomotive built by General Motors Electro-Motive Division, intended for heavy-duty drag freight or medium-speed freight service. It was introduced in 1984, and production ran until 1995.
The SD60 is essentially identical to the SD50 externally, but has a different prime mover, the new 16-cylinder EMD 710G3A, and a computer-controlled electrical system. Chicago & North Western's railroad manual estimated that the SD60 is 3% more fuel efficient than one SD50, while a pair of SD60s was up to 16% more efficient than three SD40s pulling a standard coal train.
Norfolk Southern has been modernizing their old SD60s since 2010 into SD60Es, a model specific to NS.
Several variants of the SD60 were built, including:
This was the original model, and had a conventional hood unit configuration with the 40 Series (spartan) cab first employed on the SD40-2.
The SD60F was ordered and was operated by Canadian National and has a full-width cowl body and crashworthy "safety cab" with a four-piece windshield. CN retired the SD60F in 2017, however a handful were sold off and are still working on two shortlines in North Dakota. Dakota, Missouri Valley and Western Railroad has six, and the Northern Plains Railroad has five. 14 units are currently on the Aberdeen, Carolina & Western Railway in North Carolina.
The SD60I model has a full-width short hood and features the so-called "WhisperCab" that was insulated from sound and vibration using a system of rubber gaskets. They are easily distinguished from the SD60M by the visible vertical seam just behind the front of the nose. The same cab was later used on EMD's SD70I, SD75I, SD80MAC and SD90MAC locomotives. Only Conrail ordered this model, and after 1999 all were split between the Norfolk Southern and CSX. All SD60i locomotives have either have been scrapped, sold to new owners or retired.
The SD60M features a "North American safety cab" design and has a full-width short hood. Early models until 1990 featured a three-piece windshield with vertical windows (nicknamed "triclops"), identical to the windshields found on EMD's SD40-2F and F59PH models. Later production from 1991 used two windshield panes that were sloped back, and had a somewhat shorter nose tapered on the sides. Purchasers of this model included Conrail, Union Pacific, Burlington Northern and the Soo Line Railroad. Conrail's orders were split between the Norfolk Southern and CSX upon their acquisitions of parts Conrail in 1999. All Norfolk Southern and CSX SD60M locomotives have either been scrapped, sold to new owners, or retired.
Recent media
Recent media