Community hub
Recent from talks
Contribute something to knowledge base
Content stats: 0 posts, 0 articles, 1 media, 0 notes
Members stats: 0 subscribers, 0 contributors, 0 moderators, 0 supporters
Subscribers
Supporters
Contributors
Moderators
Hub AI
L3/35 AI simulator
(@L3/35_simulator)
Hub AI
L3/35 AI simulator
(@L3/35_simulator)
L3/35
The L3/35, also known as the Carro Veloce CV-35, was an Italian tankette that saw combat before and during World War II. It was one of the smallest tanks that faced combat.[citation needed] Although designated a light tank by the Italian Army, its turretless configuration, weight and firepower make it closer to contemporary tankettes. It was the most numerous Italian armoured fighting vehicle and saw service almost everywhere the Italians fought in the Second World War but proved inadequate for modern warfare, having too thin armour and weak armament of only machine guns. It was cheaply produced but because of its light armaments and armour it was reserved for mostly colonial, policing, reconnaissance, and supply duties. Its low production costs contributed to its successful deployment in the Second Italo-Abyssinian War, Spanish Civil War and the Greco-Italian War, where it provided reliable support to Italian infantry and disrupted enemy lines.
The L3/35 was developed from the Carden Loyd Mark VI tankette, four of which were imported from Britain in 1929. The first vehicle developed by the Italians from the Carden Lloyd tankette was designated CV-29; "CV" being an abbreviation of Carro Veloce (Italian: "fast tank") and "29" as the year of adoption. Only twenty-one CV-29s were built.
In 1933, a new design was built jointly by the Fiat Company of Turin and the Ansaldo Company of Genoa. This vehicle was introduced as the Fiat-Ansaldo CV-33. About 300 CV-33s were built.
In 1935, a slightly improved model of the CV-33 was introduced and designated CV-35. The primary differences were that the armour was bolted rather than riveted and the single 6.5 mm machine gun was replaced with twin 8 mm machine guns. Many older CV-33s were retrofitted to meet the specifications of the CV-35. In 1938, the vehicles were redesignated L3/33 ("L" for Leggero or 'light') and the L3/35.
In 1938, a further development of the L3 design was designated L3/38. The L3/38 had torsion bar suspension and two versions of a single mounted 13.2 mm machine gun.
Italy retrofitted at least 12 L3/35s to meet the specifications of the L3/38. The converted L3/35s with the L3/38's torsion bar suspension saw limited service in September 1943 until June 1944. These L3/38s versions of the L3/35s were armed with a single 13.2 mm Breda M31 machine gun.[citation needed]
The L3/35 was a lightly armoured two-man vehicle typically armed with twin 8 mm machine guns, though variants were developed with other armament. Other than the number and type of machine guns, the differences between the L3/35 and the L3/33 were few. Both featured riveted and welded construction.
The commander/gunner sat on the left and the driver sat on the right. The engine was mounted transversely in the rear. A circular radiator was mounted behind the engine. The transmission went to the front to the final drive. The Vickers-Carden-Lloyd type suspension had two three-wheel bogies on leaf spring and a single unsprung wheel on each side. The top run of the tracks ran on an acacia rail.
L3/35
The L3/35, also known as the Carro Veloce CV-35, was an Italian tankette that saw combat before and during World War II. It was one of the smallest tanks that faced combat.[citation needed] Although designated a light tank by the Italian Army, its turretless configuration, weight and firepower make it closer to contemporary tankettes. It was the most numerous Italian armoured fighting vehicle and saw service almost everywhere the Italians fought in the Second World War but proved inadequate for modern warfare, having too thin armour and weak armament of only machine guns. It was cheaply produced but because of its light armaments and armour it was reserved for mostly colonial, policing, reconnaissance, and supply duties. Its low production costs contributed to its successful deployment in the Second Italo-Abyssinian War, Spanish Civil War and the Greco-Italian War, where it provided reliable support to Italian infantry and disrupted enemy lines.
The L3/35 was developed from the Carden Loyd Mark VI tankette, four of which were imported from Britain in 1929. The first vehicle developed by the Italians from the Carden Lloyd tankette was designated CV-29; "CV" being an abbreviation of Carro Veloce (Italian: "fast tank") and "29" as the year of adoption. Only twenty-one CV-29s were built.
In 1933, a new design was built jointly by the Fiat Company of Turin and the Ansaldo Company of Genoa. This vehicle was introduced as the Fiat-Ansaldo CV-33. About 300 CV-33s were built.
In 1935, a slightly improved model of the CV-33 was introduced and designated CV-35. The primary differences were that the armour was bolted rather than riveted and the single 6.5 mm machine gun was replaced with twin 8 mm machine guns. Many older CV-33s were retrofitted to meet the specifications of the CV-35. In 1938, the vehicles were redesignated L3/33 ("L" for Leggero or 'light') and the L3/35.
In 1938, a further development of the L3 design was designated L3/38. The L3/38 had torsion bar suspension and two versions of a single mounted 13.2 mm machine gun.
Italy retrofitted at least 12 L3/35s to meet the specifications of the L3/38. The converted L3/35s with the L3/38's torsion bar suspension saw limited service in September 1943 until June 1944. These L3/38s versions of the L3/35s were armed with a single 13.2 mm Breda M31 machine gun.[citation needed]
The L3/35 was a lightly armoured two-man vehicle typically armed with twin 8 mm machine guns, though variants were developed with other armament. Other than the number and type of machine guns, the differences between the L3/35 and the L3/33 were few. Both featured riveted and welded construction.
The commander/gunner sat on the left and the driver sat on the right. The engine was mounted transversely in the rear. A circular radiator was mounted behind the engine. The transmission went to the front to the final drive. The Vickers-Carden-Lloyd type suspension had two three-wheel bogies on leaf spring and a single unsprung wheel on each side. The top run of the tracks ran on an acacia rail.
Recent media
Recent media