Community hub
Recent from talks
Contribute something to knowledge base
Content stats: 0 posts, 0 articles, 1 media, 0 notes
Members stats: 0 subscribers, 0 contributors, 0 moderators, 0 supporters
Subscribers
Supporters
Contributors
Moderators
Hub AI
Level crossing AI simulator
(@Level crossing_simulator)
Hub AI
Level crossing AI simulator
(@Level crossing_simulator)
Level crossing
A level crossing is an intersection where a railway line crosses a road, path, or (in rare situations) airport runway, at the same level, as opposed to the railway line or the road etc. crossing over or under using an overpass or tunnel. The term also applies when a light rail line with separate right-of-way or reserved track crosses a road in the same fashion. Other names include railway level crossing, railway crossing (chiefly international), grade crossing or railroad crossing (chiefly American), road through railroad, criss-cross, train crossing, and RXR (abbreviated).
There are more than 100,000 level crossings in Europe and more than 200,000 in North America.
Road-grade crossings are considered incompatible with high-speed rail and are virtually non-existent in European high-speed train operations.
The types of early level crossings varied by location, but often they had a flagman in a nearby booth who, on the approach of a train, would wave a red flag or lantern to stop all traffic and clear the tracks. This was a dangerous job that cost the lives of gatekeepers or their family members, as the train was not given enough time to stop.
Gated crossings became commonplace in many areas, as they protected the railway from people trespassing and livestock, and they protected the users of the crossing when closed by the signalman/gateman. In the second quarter of the 20th century[citation needed], manual or electrical closable gates that barricaded the roadway started to be introduced, intended to be a complete barrier against intrusion of any road traffic onto the railway. Automatic crossings are now commonplace in some countries as motor vehicles replaced horse-drawn vehicles and the need for animal protection diminished with time. Full-, half- or no-barrier crossings superseded gated crossings, although crossings of older types can still be found in places. In rural regions with sparse traffic, the least expensive type of level crossing to operate is one without flagmen or gates, with only a warning sign posted. This type has been common across North America and in many developing countries.
Some international rules have helped to harmonise level crossing. For instance, the 1968 Vienna Convention states (chapter 3, article 23b) that:
This has been implemented in many countries, including countries which are not part of the Vienna Convention.
Trains have a much larger mass relative to their braking capability, and thus a far longer braking distance than road vehicles. With rare exceptions, trains do not stop at level crossings but rely on road vehicles and pedestrians to clear the tracks in advance. There have been several accidents in which a heavy load on a slow road transporter has not cleared the line in time, such as the Hixon rail crash.
Level crossing
A level crossing is an intersection where a railway line crosses a road, path, or (in rare situations) airport runway, at the same level, as opposed to the railway line or the road etc. crossing over or under using an overpass or tunnel. The term also applies when a light rail line with separate right-of-way or reserved track crosses a road in the same fashion. Other names include railway level crossing, railway crossing (chiefly international), grade crossing or railroad crossing (chiefly American), road through railroad, criss-cross, train crossing, and RXR (abbreviated).
There are more than 100,000 level crossings in Europe and more than 200,000 in North America.
Road-grade crossings are considered incompatible with high-speed rail and are virtually non-existent in European high-speed train operations.
The types of early level crossings varied by location, but often they had a flagman in a nearby booth who, on the approach of a train, would wave a red flag or lantern to stop all traffic and clear the tracks. This was a dangerous job that cost the lives of gatekeepers or their family members, as the train was not given enough time to stop.
Gated crossings became commonplace in many areas, as they protected the railway from people trespassing and livestock, and they protected the users of the crossing when closed by the signalman/gateman. In the second quarter of the 20th century[citation needed], manual or electrical closable gates that barricaded the roadway started to be introduced, intended to be a complete barrier against intrusion of any road traffic onto the railway. Automatic crossings are now commonplace in some countries as motor vehicles replaced horse-drawn vehicles and the need for animal protection diminished with time. Full-, half- or no-barrier crossings superseded gated crossings, although crossings of older types can still be found in places. In rural regions with sparse traffic, the least expensive type of level crossing to operate is one without flagmen or gates, with only a warning sign posted. This type has been common across North America and in many developing countries.
Some international rules have helped to harmonise level crossing. For instance, the 1968 Vienna Convention states (chapter 3, article 23b) that:
This has been implemented in many countries, including countries which are not part of the Vienna Convention.
Trains have a much larger mass relative to their braking capability, and thus a far longer braking distance than road vehicles. With rare exceptions, trains do not stop at level crossings but rely on road vehicles and pedestrians to clear the tracks in advance. There have been several accidents in which a heavy load on a slow road transporter has not cleared the line in time, such as the Hixon rail crash.
Recent media
Recent media