Longshore drift

Longshore drift from longshore current is a geological process that consists of the transportation of sediments (clay, silt, pebbles, sand, shingle, shells) along a coast parallel to the shoreline, which is dependent on the angle of incoming wave direction. Oblique incoming wind squeezes water along the coast, generating a water current that moves parallel to the coast. Longshore drift is simply the sediment moved by the longshore current. This current and sediment movement occurs within the surf zone. The process is also known as littoral drift.

Beach sand is also moved on such oblique wind days, due to the swash and backwash of water on the beach. Breaking surf sends water up the coast (swash) at an oblique angle and gravity then drains the water straight downslope (backwash) perpendicular to the shoreline. Thus beach sand can move downbeach in a sawtooth fashion many tens of meters (yards) per day. This process is called "beach drift", but some workers regard it as simply part of "longshore drift" because of the overall movement of sand parallel to the coast.

Longshore drift affects numerous sediment sizes as it works in slightly different ways depending on the sediment (e.g. the difference in long-shore drift of sediments from a sandy beach to that of sediments from a shingle beach). Sand is largely affected by the oscillatory force of breaking waves, the motion of sediment due to the impact of breaking waves and bed shear from long-shore current. Because shingle beaches are much steeper than sandy ones, plunging breakers are more likely to form, causing the majority of longshore transport to occur in the swash zone, due to a lack of an extended surf zone.

The concept of longshore drift or transportation of sediment parallel to the shore by wave action has evolved considerably with time. Early observations related to sediment displacement can be traced back to coastal communities, but the formal scientific understanding of this started crystallising in the 19th and early 20th centuries. While such early perceptions were imprecise, this evolution has encouraged a gradually more sophisticated understanding of the processes occurring at coastlines. Understanding of the coastline processes has continued to evolve through a succession of developments that began many years ago.

Erosion of coasts and sediment transport was known in ancient times, mostly in those parts of the world where dramatic changes of shores take place. However, these early observations were largely anecdotal. Fishermen, sailors and locals would note that sand and gravel seemingly "moved" down the beaches; they didn't fully understand the mechanics, however. Because of the general scientific knowledge, this was an interesting but somewhat misunderstood phenomenon.

The systematic investigation into the coast processes, including those responsible for longshore drift, began in the mid-1800s when scientists tried to explain the processes of sediment movement along coasts. Among the first of such theories were those proposed by a French engineer, Jean-Baptiste Fourier, and a British geologist, Robert Mallet. They studied wave action and sediment transport; however, at that time, the term "longshore drift" was not yet coined. Instead, the principal focus was to understand the processes of waves and their impact on the resuspension and movement of sand and pebbles. The subject was of primary importance because it helped to explain the morphological features of any coast. However, while much is covered, the complete significance of such mechanisms was yet to be fully realised.

In the early years of the 20th century, longshore drift became much more refined in its explanation through oceanographers and coastal engineers. They realised that the angle of wave approach to the coast is of paramount importance to sediment transport. This then led to the development in the concept of "longshore currents," which in turn transport sediment along the coast. These currents then became recognised as the main agent of longshore drift. An important concept which emerged during this generation was that of the "drift-aligned" beach. It explained how beaches get to form as a result of prevailing wind and wave directions and that on one side of the beach deposition takes place, while on the other side, erosion does. While the mechanics were becoming more apparent, the interrelationship of the forces in play still proved quite problematic for those trying to manage coasts.

Numerous calculations take into consideration the factors that produce longshore drift. These formulations are: