Hubbry Logo
search
search button
Sign in
Historyarrow-down
starMorearrow-down
Hubbry Logo
search
search button
Sign in
P-class Sydney tram
Community hub for the Wikipedia article
logoWikipedian hub
Welcome to the community hub built on top of the P-class Sydney tram Wikipedia article. Here, you can discuss, collect, and organize anything related to P-class Sydney tram. The purpose of the hub is to connect people, foster deeper knowledge, and help improve the root Wikipedia article.
Add your contribution
Inside this hub
P-class Sydney tram

P-class
ManufacturerRandwick Tramway Workshops
Meadowbank Manufacturing Company
Walsh Island Dockyard
Constructed1921-29
Number built258
Fleet numbers1480-1737
Capacity80 (Seated)
48 (Standing)
Specifications
Train length13.85 metres
Width2.74 metres
Height3.26 metres
Maximum speed60 km/h
Weight16.9 t
Power output4 x 40 hp
Electric system(s)600 V DC catenary
Current collectionTrolley pole
Track gauge1,435 mm (4 ft 8+12 in)

The P-class trams were a class of trams operated on the Sydney tram network.

History

[edit]

Between 1921 and 1929, 258 P class trams were built by Randwick Tramway Workshops, Meadowbank Manufacturing Company, and the Walsh Island Dockyard. As with the preceding O class trams, the P class were cross bench cars with 80 seat capacity. They were a big improvement over the O-class in that all compartments offered protection from bad weather on both sides of the bodies when running. Fitted with folding canvas doors in each compartment, conductors only had to push open one half of a door.[1]

The P-class trams were based at all depots on the main system except Rushcutters Bay, but worked to the Sydney Stadium, just past the depot between 1947 and 1959 out of Waverley and Dowling Street for special events, plus out to Watsons Bay for picnic specials. Most were withdrawn in 1959/1960.

One tram, 1691, had a narrow corridor cut through the cross bench bulkheads, and was then the sole member of the PR class.

Four (1517 & 1573 at Randwick Tramway Workshops and 1562 & 1582 Eveleigh Railway Workshops) were refitted with the same windows, centre door and internal layout as the R1 class, and were known as the PR1 class or P/R1 class.[1][2]

Preservation

[edit]

Six have been preserved:

References

[edit]

Further reading

[edit]
[edit]
Add your contribution
Related Hubs