Community hub
Recent from talks
Knowledge base stats:
Talk channels stats:
Members stats:
Pattern 1914 Enfield
The Rifle, .303 Pattern 1914 (or P14) was a British service rifle of the First World War period, principally manufactured under contract by companies in the United States. It was a bolt-action weapon with an integral 5-round magazine. It served as a sniper rifle and as second-line and reserve issue, until declared obsolete in 1947.[citation needed] The Pattern 1914 Enfield was the successor to the Pattern 1913 Enfield experimental rifle and the predecessor of the U.S. Rifle M1917 Enfield.
During the Second Boer War, the British were faced with accurate long-range fire from Mauser rifles, model 1893 and 1895, in 7×57mm caliber. This smaller, high-velocity round prompted the War Office to develop their own "magnum" round, the .276 Enfield, in 1910. An advanced new rifle using a modified Mauser M98-pattern action was built to fire it, the Pattern 1913 Enfield (P13); effective mass production was still not in effect when World War I started, due to the logistical issues that introducing a new rifle cartridge in wartime would cause, so nothing came of it.
The primary contractor (Vickers) was unable to produce more than a handful of rifles, so the P14 became a de facto afterthought. The Short Magazine Lee–Enfield therefore remained the standard British rifle during World War I and beyond.
The need for additional small arms combined with a shortage of spare industrial capacity led the British government to contract with United States commercial arms manufacturers, Winchester, Remington and Eddystone (a subsidiary of Remington set up principally to manufacture the P14) to produce the P14 for the British, which continued until the U.S. entered the war in 1917. However, each factory produced slightly differing parts, leading to interchangeability issues. Therefore, the official designation of the rifle was dependent upon its manufacturer: e.g., the Pattern 1914 Mk I W is a Mk I of Winchester manufacture, R would be Remington, or E for Eddystone. Problems were encountered with specifications, quality and shortage of machine tools and skilled workers, with the result that the first rifles were not accepted by British inspectors until February 1916.[citation needed] In December 1916, a modification was made to enlarge the bolt lugs and the rifle became the Mark I*. They were still designated by the letter of their manufacturer (W, R or E), although production had become more standardized. The Mk I were soon confined to training usage and marked DP, meaning Drill Purpose.
The P14's principal combat use during World War I was as a sniper rifle, since it was found to be more accurate than the Short Magazine Lee–Enfield, either in standard issue form or with modified "fine-adjustment" aperture rearsights designated Pattern 1914 Mk I W (F) and Pattern 1914 Mk I* W (F) or, from April 1918, Aldis Pattern 1918 telescopic sights designated Pattern 1914 Mk I* W (T) (modified and telescopic sights were mainly used on Winchester-manufactured rifles, the Winchesters being thought to be of superior quality). Eventually Winchester manufactured 235,293 rifles, Remington manufactured 400,000 and Eddystone manufactured 600,000, totaling 1,235,293 rifles.
When the U.S. entered World War I, the P14 was modified and standardized by the Ordnance Department and went into production at the same factories as had produced the P14, production of that rifle having ceased, as the Model of 1917. Sometimes called the M1917 Enfield, it was chambered for the standard U.S. .30-06 Springfield cartridge and enjoyed some success as a complement to the Springfield M1903 rifles which were America's official standard issue, soon far surpassing the Springfield in total production and breadth of issue.
In 1926, the Pattern 1914 Enfield was re-designated by the British military as the No.3 Mk I.
Prior to and during World War II, over 670,000 Pattern 1914 Enfields were used, after undergoing modification ("Weedon Repair Standard", formally the Mk II standard) in the UK, mainly as a rearguard rifle. The modification consisted of armourers at the Weedon Royal Ordnance Depot or various other commercial companies inspecting the rifles, removing the volley sights and performing any necessary repair prior to issue. Post Dunkirk and with the great loss of arms that the British forces endured in 1940, the stock of No3Mk1 suddenly became a valued resource. The rifle was also used again as a sniper rifle, the configuration being different from the World War I incarnation.[citation needed] Additionally, the U.S. sent some M1917 Enfield rifles to the UK under Lend-Lease, though the different .30-06 Springfield chambering limited use and necessitated clearly marking the rifles with a 2 inch wide red band around the stock. The Australian Army also used some quantities of the sniper variant of the P14 during World War II. Once sufficient numbers were built up of the Short Magazine Lee–Enfield and No.4 rifles, the No.3 Mk I were either relegated primarily to equip the World War II British Home Guard or used as sniper rifles. Some sniper rifles were used during the Korean War.
Hub AI
Pattern 1914 Enfield AI simulator
(@Pattern 1914 Enfield_simulator)
Pattern 1914 Enfield
The Rifle, .303 Pattern 1914 (or P14) was a British service rifle of the First World War period, principally manufactured under contract by companies in the United States. It was a bolt-action weapon with an integral 5-round magazine. It served as a sniper rifle and as second-line and reserve issue, until declared obsolete in 1947.[citation needed] The Pattern 1914 Enfield was the successor to the Pattern 1913 Enfield experimental rifle and the predecessor of the U.S. Rifle M1917 Enfield.
During the Second Boer War, the British were faced with accurate long-range fire from Mauser rifles, model 1893 and 1895, in 7×57mm caliber. This smaller, high-velocity round prompted the War Office to develop their own "magnum" round, the .276 Enfield, in 1910. An advanced new rifle using a modified Mauser M98-pattern action was built to fire it, the Pattern 1913 Enfield (P13); effective mass production was still not in effect when World War I started, due to the logistical issues that introducing a new rifle cartridge in wartime would cause, so nothing came of it.
The primary contractor (Vickers) was unable to produce more than a handful of rifles, so the P14 became a de facto afterthought. The Short Magazine Lee–Enfield therefore remained the standard British rifle during World War I and beyond.
The need for additional small arms combined with a shortage of spare industrial capacity led the British government to contract with United States commercial arms manufacturers, Winchester, Remington and Eddystone (a subsidiary of Remington set up principally to manufacture the P14) to produce the P14 for the British, which continued until the U.S. entered the war in 1917. However, each factory produced slightly differing parts, leading to interchangeability issues. Therefore, the official designation of the rifle was dependent upon its manufacturer: e.g., the Pattern 1914 Mk I W is a Mk I of Winchester manufacture, R would be Remington, or E for Eddystone. Problems were encountered with specifications, quality and shortage of machine tools and skilled workers, with the result that the first rifles were not accepted by British inspectors until February 1916.[citation needed] In December 1916, a modification was made to enlarge the bolt lugs and the rifle became the Mark I*. They were still designated by the letter of their manufacturer (W, R or E), although production had become more standardized. The Mk I were soon confined to training usage and marked DP, meaning Drill Purpose.
The P14's principal combat use during World War I was as a sniper rifle, since it was found to be more accurate than the Short Magazine Lee–Enfield, either in standard issue form or with modified "fine-adjustment" aperture rearsights designated Pattern 1914 Mk I W (F) and Pattern 1914 Mk I* W (F) or, from April 1918, Aldis Pattern 1918 telescopic sights designated Pattern 1914 Mk I* W (T) (modified and telescopic sights were mainly used on Winchester-manufactured rifles, the Winchesters being thought to be of superior quality). Eventually Winchester manufactured 235,293 rifles, Remington manufactured 400,000 and Eddystone manufactured 600,000, totaling 1,235,293 rifles.
When the U.S. entered World War I, the P14 was modified and standardized by the Ordnance Department and went into production at the same factories as had produced the P14, production of that rifle having ceased, as the Model of 1917. Sometimes called the M1917 Enfield, it was chambered for the standard U.S. .30-06 Springfield cartridge and enjoyed some success as a complement to the Springfield M1903 rifles which were America's official standard issue, soon far surpassing the Springfield in total production and breadth of issue.
In 1926, the Pattern 1914 Enfield was re-designated by the British military as the No.3 Mk I.
Prior to and during World War II, over 670,000 Pattern 1914 Enfields were used, after undergoing modification ("Weedon Repair Standard", formally the Mk II standard) in the UK, mainly as a rearguard rifle. The modification consisted of armourers at the Weedon Royal Ordnance Depot or various other commercial companies inspecting the rifles, removing the volley sights and performing any necessary repair prior to issue. Post Dunkirk and with the great loss of arms that the British forces endured in 1940, the stock of No3Mk1 suddenly became a valued resource. The rifle was also used again as a sniper rifle, the configuration being different from the World War I incarnation.[citation needed] Additionally, the U.S. sent some M1917 Enfield rifles to the UK under Lend-Lease, though the different .30-06 Springfield chambering limited use and necessitated clearly marking the rifles with a 2 inch wide red band around the stock. The Australian Army also used some quantities of the sniper variant of the P14 during World War II. Once sufficient numbers were built up of the Short Magazine Lee–Enfield and No.4 rifles, the No.3 Mk I were either relegated primarily to equip the World War II British Home Guard or used as sniper rifles. Some sniper rifles were used during the Korean War.