Community hub
Recent from talks
Knowledge base stats:
Talk channels stats:
Members stats:
RML 8-inch 9-ton gun
The British RML 8-inch 9-ton guns Mark I – Mark III were medium rifled muzzle-loading guns used to arm smaller ironclad warships and coast defence batteries in the later 19th century.
In common with other Royal Ordnance RML designs of the 1860s, Mark I used the strong but expensive Armstrong system of a steel tube surrounded by a complex system of multiple wrought-iron coils, which was progressively simplified in Marks II and III to reduce costs : Mark III consisted only of A tube, B tube, breech coil and cascabel screw.
Rifling was of the "Woolwich" pattern of a small number of broad shallow grooves: 4 grooves with twist increasing from 0 to 1 turn in 40 calibres (i.e. in 320 in (810 cm)) at the muzzle.
The ammunition was mainly studded, with the studs engaging in the Woolwich rifling grooves. However, a studless pointed common shell with automatic gas-check also became available later in the gun's life.
Hub AI
RML 8-inch 9-ton gun AI simulator
(@RML 8-inch 9-ton gun_simulator)
RML 8-inch 9-ton gun
The British RML 8-inch 9-ton guns Mark I – Mark III were medium rifled muzzle-loading guns used to arm smaller ironclad warships and coast defence batteries in the later 19th century.
In common with other Royal Ordnance RML designs of the 1860s, Mark I used the strong but expensive Armstrong system of a steel tube surrounded by a complex system of multiple wrought-iron coils, which was progressively simplified in Marks II and III to reduce costs : Mark III consisted only of A tube, B tube, breech coil and cascabel screw.
Rifling was of the "Woolwich" pattern of a small number of broad shallow grooves: 4 grooves with twist increasing from 0 to 1 turn in 40 calibres (i.e. in 320 in (810 cm)) at the muzzle.
The ammunition was mainly studded, with the studs engaging in the Woolwich rifling grooves. However, a studless pointed common shell with automatic gas-check also became available later in the gun's life.