Hubbry Logo
search
logo
2138808

Reese's Pieces

logo
Community Hub0 Subscribers
2138808

Reese's Pieces

logo
Community Hub0 Subscribers
Write something...
Be the first to start a discussion here.
Be the first to start a discussion here.
See all
Reese's Pieces

Reese's Pieces are a peanut butter candy manufactured by The Hershey Company; they are oblate spheroid in shape and covered in candy shells that are colored yellow, orange, or brown. They can be purchased in plastic packets, cardboard boxes, or cup-shaped travel containers.

The candy was introduced to the US market first in September 1978. Shortly after, Reese's Pieces were introduced to the Canada market in 1980. The then relatively new product became very popular with the 1982 release of E.T. the Extra-Terrestrial, in which the candy is featured.

Reese's Pieces were introduced in the UK in 1996, but are produced in the US.

Reese's Pieces are a product extension of the Reese's Peanut Butter Cups line; they were designed to capitalize on the success of the chocolate-covered peanut butter cups, though unlike the cups, they have no chocolate.

Reese's Pieces have been included in many Reese's and Hershey's products since their introduction. Below is a list of available products that contain Reese's Pieces, from the candy pieces being stuffed inside of existing chocolate bar variations to bags of baking chip mixes.[citation needed]

In the 1970s, the candies were produced by The Hershey Company using panning machines that had been used to make Hershey-ets, a chocolate-filled candy that had been discontinued. The candy was first called "PBs" and was later rechristened as Reese's Pieces. Designers wanted a peanut-flavored candy but had problems with the filling. Original plans called for filling the candy shells with peanut butter, but the oil leaked out into the shell, leaving it soft, rather than crunchy.[citation needed]

The developer of the project turned the problem over to a team of outside scientists, who created a peanut-flavored penuche filling. More experimentation was needed to determine the correct thickness of the shell. Finally, the colors of the candy coating were designed to coordinate with the color of the Reese's package. The color distribution goal is 50% orange, 25% brown, and 25% yellow.

In 1982, the Mars candy bar company rejected a product placement offer for the inclusion of its key product M&M's in the Steven Spielberg film, E.T. the Extra-Terrestrial. Hershey accepted an offer for use of Reese's Pieces in the movie, and with the film's blockbuster success its product sales dramatically increased, perhaps as much as 300%.

See all
User Avatar
No comments yet.