Ancient Roman sarcophagi

In the burial practices of ancient Rome and Roman funerary art, marble and limestone sarcophagi elaborately carved in relief were characteristic of elite inhumation burials from the 2nd to the 4th centuries AD. At least 10,000 Roman sarcophagi have survived, with fragments possibly representing as many as 20,000. Although mythological scenes have been quite widely studied, sarcophagus relief has been called the "richest single source of Roman iconography," and may also depict the deceased's occupation or life course, military scenes, and other subject matter. The same workshops produced sarcophagi with Jewish or Christian imagery. Early Christian sarcophagi produced from the late 3rd century onwards, represent the earliest form of large Christian sculpture, and are important for the study of Early Christian art.

They were mostly made in a few major cities, including Rome and Athens, which exported them to other cities. Elsewhere the stela gravestone remained more common. They were always a very expensive form reserved for the elite, and especially so in the relatively few very elaborately carved examples; most were always relatively plain, with inscriptions, or symbols such as garlands. Sarcophagi divide into a number of styles, by the producing area. "Roman" ones were made to rest against a wall, and one side was left uncarved, while "Attic" and other types were carved on all four sides; but the short sides were generally less elaborately decorated in both types.

The time taken to make them encouraged the use of standard subjects, to which inscriptions might be added to personalize them, and portraits of the deceased were slow to appear. The sarcophagi offer examples of intricate reliefs that depict scenes often based on Greek and Roman mythology or mystery religions that offered personal salvation, and allegorical representations. Roman funerary art also offers a variety of scenes from everyday life, such as game-playing, hunting, and military endeavors. Early Christian art quickly adopted the sarcophagus, and they are the most common form of early Christian sculpture, progressing from simple examples with symbols to elaborate fronts, often with small scenes of the Life of Christ in two rows within an architectural framework. The Sarcophagus of Junius Bassus (ca. 359) is of this type, and the earlier Dogmatic Sarcophagus rather simpler. The huge porphyry Sarcophagi of Helena and Constantina are grand Imperial examples.

Cremation was the predominant means of disposing of remains in the Roman Republic. Ashes contained in cinerary urns and other monumental vessels were placed in tombs. From the 2nd century AD onward, inhumation became more common, and after the Roman Empire came under Christian rule, was standard practice. The Sarcophagus of Lucius Cornelius Scipio Barbatus is a rare example from much earlier. A sarcophagus, which means "flesh-eater" in Greek, is a stone coffin used for inhumation burials. Sarcophagi were commissioned not only for the elite of Roman society (mature male citizens), but also for children, entire families, and beloved wives and mothers. The most expensive sarcophagi were made from marble, but other stones, lead, and wood were used as well. Along with the range in production material, there existed a variety of styles and shapes, depending on where the sarcophagus was produced and whom it was produced for.

Inhumation burial practices and the use of sarcophagi were not always the favored Roman funerary custom. The Etruscans and Greeks used sarcophagi for centuries before the Romans finally adopted the practice in the second century. Prior to that period, the dead were usually cremated and placed in marble ash chests or ash altars, or were simply commemorated with a grave altar that was not designed to hold cremated remains. Despite being the main funerary custom during the Roman Republic, ash chests and grave altars virtually disappeared from the market only a century after the advent of the sarcophagus.

It is often assumed that the popularity for sarcophagi began with the Roman aristocracy and gradually became more accepted by the lower classes. However, in the past, the most expensive and ostentatious grave altars and ash chests were commissioned more frequently by wealthy freedmen and other members of the emerging middle class than by the Roman elite. Due to this fact and the lack of inscriptions on early sarcophagi, there is not enough evidence to make a judgment on whether or not the fashion for sarcophagi began with a specific social class. Surviving evidence does indicate that a great majority of early sarcophagi were used for children. This suggests that the change in burial practice may not have simply stemmed from a change in fashion, but perhaps from altered burial attitudes. It is possible that the decision to begin inhuming bodies occurred because families believed that inhumation was a kinder, and less disturbing burial rite than cremation, thus necessitating a shift in burial monument.

Although grave altars and ash chests virtually disappeared from the market in the second century, aspects of their decoration endured in some stylistic elements of sarcophagi. The largest stylistic group of early sarcophagi in the second century is garland sarcophagi, a custom of decoration that was previously used on ash chests and grave altars. Though the premise of the decoration is the same, there are some differences. The garland supports are often human figures instead of the animal heads used previously. In addition, specific mythological scenes fill the field, rather than small birds or other minor scenes. The inscription panel on garland ash altars and chests is also missing on garland sarcophagi. When a sarcophagus did have an inscription, it seemed to be an extra addition and usually ran along the top edge of the chest or between the decorations. The fact that early garland sarcophagi continued the tradition of grave altars with decorated garlands suggests that the customers and sculptors of sarcophagi had similar approaches to those who purchased and produced grave altars. Both monuments employed a similar collection of stylistic motifs with only subtle shifts in iconography.

Sarcophagi production of the ancient Roman Empire involved three main parties: the customer, the sculpting workshop that carved the monument, and the quarry-based workshop that supplied the materials. The distance between these parties was highly variable due to the extensive size of the Empire. Metropolitan Roman, Attic, and Asiatic were the three major regional types of sarcophagi that dominated trade throughout the Roman Empire. Although they were divided into regions, the production of sarcophagi was not as simple as it might appear. For example, Attic workshops were close to Mount Pentelikon, the source of their materials, but were usually very far from their client. The opposite was true for the workshops of Metropolitan Rome, who tended to import large, roughed out sarcophagi from distant quarries in order to complete their commissions. Depending on distance and customer request (some customers might choose to have elements of their sarcophagi left unfinished until a future date, introducing the possibility of further work after the main commission), sarcophagi were in many different stages of production during transport. As a result, it is difficult to develop a standardized model of production.