Hubbry Logo
search
logo
90511

2019 LTi Printing 250

logo
Community Hub0 Subscribers
Write something...
Be the first to start a discussion here.
Be the first to start a discussion here.
See all
2019 LTi Printing 250

The 2019 LTi Printing 250 is a NASCAR Xfinity Series race held on June 8, 2019, at Michigan International Speedway in Brooklyn, Michigan. Contested over 125 laps on the 2.5-mile (4.0 km) D-shaped oval, it was the 13th race of the 2019 NASCAR Xfinity Series season.

Michigan International Speedway is a moderate-banked D-shaped speedway located in Brooklyn, Michigan. The track is used primarily for NASCAR events. It is sometimes known as a "sister track" to Texas World Speedway, and was used as the basis of Auto Club Speedway. The track is owned by International Speedway Corporation. Michigan International Speedway is recognized as one of motorsports' premier facilities because of its wide racing surface and high banking (by open-wheel standards; the 18-degree banking is modest by stock car standards).

Christopher Bell was the fastest in the first practice session with a time of 38.143 seconds and a speed of 188.763 mph (303.785 km/h).

Christopher Bell was the fastest in the final practice session with a time of 38.091 seconds and a speed of 189.021 mph (304.200 km/h).

Paul Menard scored the pole for the race with a time of 37.237 seconds and a speed of 193.356 mph (311.176 km/h).

Stage One Laps: 30

Stage Two Laps: 30

Stage Three Laps: 65

See all
User Avatar
No comments yet.