Recent from talks
Amiga 600
Knowledge base stats:
Talk channels stats:
Members stats:
Amiga 600
The Amiga 600, also known as the A600, and full title Commodore Amiga 600, is a home computer introduced in March 1992. It is the final Amiga model based on the Motorola 68000 and the 1990 Amiga Enhanced Chip Set. A redesign of the Amiga 500 Plus, it adds the option of an internal hard disk drive and a PCMCIA port. Lacking a numeric keypad, the A600 is only slightly larger than an IBM PC keyboard, weighing approximately 6 pounds (2.72kg). It shipped with AmigaOS 2.0, which was considered more user-friendly than earlier versions of the operating system.
Like the A500, the A600 was aimed at the lower end of the market. Commodore intended it to revitalize sales of the A500-related line before the introduction of the 32-bit Amiga 1200. According to Dave Haynie, the A600 "was supposed to be US$50–60 cheaper than the A500, but it came in at about that much more expensive." The A600 was originally to have been numbered the A300, positioning it as a lower-budget version of the Amiga 500 Plus.
An A600HD model was sold with an internal 2.5" ATA hard disk drive of either 20 or 40 MB.
Due to the inclusion of Kickstart 2.05, many software titles made for A1000 or A500 do not work properly or at all on A600 or later. A program, Relokick, was released (and included with the March 1993 issue of CU Amiga) which loaded a Kickstart 1.3 ROM image into memory and booted the machine into Kickstart 1.3, allowing most incompatible software to run. Because Relokick itself occupies 512 KB of memory, some titles would not work unless the A600 was fitted with a 1 MB trapdoor memory expansion.
After the release of the Amiga 3000T, Commodore's next project was a next-generation Amiga chipset, which became the Advanced Graphics Architecture (AGA). Concurrently, engineers Dave Haynie, Jeff Porter, and Eric Lavitsky began work on Amiga 3000+, which would have been the first computer to use the AGA chipset, and Joe Augenbraun was behind the Amiga 1000+, which also would have used the chipset. Meanwhile, George Robbins designed another low-end project called the Amiga 300. The computer, codenamed June Bug, had a floppy drive built in and was roughly the same size and weight as a Commodore 64. Development took a turn on all three projects when Ali dismissed the engineering management team and appointed former IBM executive Bill Sydnes as the company's engineering manager. Sydnes canceled the A1000+ and A3000+ models and delayed the AGA chipset, but simply changed the A300's design goals.
The model was launched in mid-March 1992 as the Amiga 600, superseding the A500. Units were manufactured in Commodore's production plants in Irvine, Scotland; Braunschweig, Germany; Kwai Chung, Hong Kong; and the Philippines. In the United States, it and its hard disk drive variant, the Amiga 600HD, sold for $499.99 and $749.99, respectively, the former of which was about $50 more than an A500 while the two systems were on sale, although the A600 was supposed to be sold for about that much less. Sydnes canceled the still-popular A500 that year to ensure demand for the new system, and development on the Amiga series stalled for the first six months as he and Ali focused on targeting the PC marketplace while selling the new model. The Amiga 600 was discontinued in late 1993.
The machine is reported to have sold 193,000 units in Germany.
In addition to the stock A600, mouse, power supply, and Workbench disk package, the A600 was available with the following software and hardware bundles:
Hub AI
Amiga 600 AI simulator
(@Amiga 600_simulator)
Amiga 600
The Amiga 600, also known as the A600, and full title Commodore Amiga 600, is a home computer introduced in March 1992. It is the final Amiga model based on the Motorola 68000 and the 1990 Amiga Enhanced Chip Set. A redesign of the Amiga 500 Plus, it adds the option of an internal hard disk drive and a PCMCIA port. Lacking a numeric keypad, the A600 is only slightly larger than an IBM PC keyboard, weighing approximately 6 pounds (2.72kg). It shipped with AmigaOS 2.0, which was considered more user-friendly than earlier versions of the operating system.
Like the A500, the A600 was aimed at the lower end of the market. Commodore intended it to revitalize sales of the A500-related line before the introduction of the 32-bit Amiga 1200. According to Dave Haynie, the A600 "was supposed to be US$50–60 cheaper than the A500, but it came in at about that much more expensive." The A600 was originally to have been numbered the A300, positioning it as a lower-budget version of the Amiga 500 Plus.
An A600HD model was sold with an internal 2.5" ATA hard disk drive of either 20 or 40 MB.
Due to the inclusion of Kickstart 2.05, many software titles made for A1000 or A500 do not work properly or at all on A600 or later. A program, Relokick, was released (and included with the March 1993 issue of CU Amiga) which loaded a Kickstart 1.3 ROM image into memory and booted the machine into Kickstart 1.3, allowing most incompatible software to run. Because Relokick itself occupies 512 KB of memory, some titles would not work unless the A600 was fitted with a 1 MB trapdoor memory expansion.
After the release of the Amiga 3000T, Commodore's next project was a next-generation Amiga chipset, which became the Advanced Graphics Architecture (AGA). Concurrently, engineers Dave Haynie, Jeff Porter, and Eric Lavitsky began work on Amiga 3000+, which would have been the first computer to use the AGA chipset, and Joe Augenbraun was behind the Amiga 1000+, which also would have used the chipset. Meanwhile, George Robbins designed another low-end project called the Amiga 300. The computer, codenamed June Bug, had a floppy drive built in and was roughly the same size and weight as a Commodore 64. Development took a turn on all three projects when Ali dismissed the engineering management team and appointed former IBM executive Bill Sydnes as the company's engineering manager. Sydnes canceled the A1000+ and A3000+ models and delayed the AGA chipset, but simply changed the A300's design goals.
The model was launched in mid-March 1992 as the Amiga 600, superseding the A500. Units were manufactured in Commodore's production plants in Irvine, Scotland; Braunschweig, Germany; Kwai Chung, Hong Kong; and the Philippines. In the United States, it and its hard disk drive variant, the Amiga 600HD, sold for $499.99 and $749.99, respectively, the former of which was about $50 more than an A500 while the two systems were on sale, although the A600 was supposed to be sold for about that much less. Sydnes canceled the still-popular A500 that year to ensure demand for the new system, and development on the Amiga series stalled for the first six months as he and Ali focused on targeting the PC marketplace while selling the new model. The Amiga 600 was discontinued in late 1993.
The machine is reported to have sold 193,000 units in Germany.
In addition to the stock A600, mouse, power supply, and Workbench disk package, the A600 was available with the following software and hardware bundles:
Recent media