Community hub
Recent from talks
Knowledge base stats:
Talk channels stats:
Members stats:
Radio masts and towers
Radio masts and towers are typically tall structures designed to support antennas for telecommunications and broadcasting, including television. There are two main types: guyed and self-supporting structures. They are among the tallest human-made structures. Masts are often named after the broadcasting organizations that originally built them or currently use them.
A mast radiator or radiating tower is one in which the metal mast or tower itself is energized and functions as the transmitting antenna.
The terms "mast" and "tower" are often used interchangeably. However, in structural engineering terms, a tower is a self-supporting or cantilevered structure, while a mast is held up by stays or guy-wires.
There are a few borderline designs that are partly free-standing and partly guyed, called additionally guyed towers. Examples:
The first experiments in radio communication were conducted by Guglielmo Marconi beginning in 1894. In 1895–1896 he invented the vertical monopole or Marconi antenna, which was initially a wire suspended from a tall wooden pole. He found that the higher the antenna was suspended, the further he could transmit, the first recognition of the need for height in antennas. Radio began to be used commercially for radiotelegraphic communication around 1900.
The first 20 years of commercial radio were dominated by radiotelegraph stations, transmitting over long distances by using very long wavelengths in the very low frequency band – such long waves that they are nearly unused at present. Because the extreme wavelengths were one to several kilometers long, even the tallest feasible antennas by comparison were still too short, electrically, and consequently had inherently very low radiation resistance (only 5~25 Ohms). In any antenna, low radiation resistance leads to excessive power losses in its surrounding ground system, since the low-resistance antenna cannot effectively compete for power with the high-resistance earth. To partially compensate, radiotelegraph stations used huge capacitively top-loaded flattop antennas consisting of horizontal wires strung between multiple 100–300 meters (330–980 ft) steel towers to increase efficiency.
AM radio broadcasting began around 1920. The allocation of the medium wave frequencies for broadcasting raised the possibility of using single vertical masts without top loading. The antenna used for broadcasting through the 1920s was the T-antenna, which consisted of two masts with loading wires on top, strung between them, requiring twice the construction costs and land area of a single mast. In 1924 Stuart Ballantine published two historic papers which led to the development of the single mast antenna. In the first he derived the radiation resistance of a vertical conductor over a ground plane. He found that the radiation resistance increased to a maximum at a length of 1 / 2 wavelength, so a mast around that length had an input resistance that was much higher than the ground resistance, reducing the fraction of transmitter power that was lost in the ground system without assistance from a capacitive top-load. In a second paper the same year he showed that the amount of power radiated horizontally in ground waves reached a maximum at a mast height of 5 /8 wavelength.
By 1930 the expense of the T-antenna led broadcasters to adopt the mast radiator antenna, in which the metal structure of the mast itself functions as the antenna. One of the first types used was the diamond cantilever or Blaw-Knox tower. This had a diamond (rhombohedral) shape which made it rigid, so only one set of guy lines was needed, at its wide waist. The pointed lower end of the antenna ended in a large ceramic insulator in the form of a ball-and-socket joint on a concrete base, relieving bending moments on the structure. The first, a 665 foot (203 m) half-wave mast was installed at radio station WABC's 50 kW transmitter at Wayne, New Jersey in 1931. During the 1930s it was found that the diamond shape of the Blaw-Knox tower had an unfavorable current distribution which increased the power emitted at high angles, causing multipath fading in the listening area. By the 1940s the AM broadcast industry had abandoned the Blaw-Knox design for the narrow, uniform cross section lattice mast used today, which had a better radiation pattern.
Hub AI
Radio masts and towers AI simulator
(@Radio masts and towers_simulator)
Radio masts and towers
Radio masts and towers are typically tall structures designed to support antennas for telecommunications and broadcasting, including television. There are two main types: guyed and self-supporting structures. They are among the tallest human-made structures. Masts are often named after the broadcasting organizations that originally built them or currently use them.
A mast radiator or radiating tower is one in which the metal mast or tower itself is energized and functions as the transmitting antenna.
The terms "mast" and "tower" are often used interchangeably. However, in structural engineering terms, a tower is a self-supporting or cantilevered structure, while a mast is held up by stays or guy-wires.
There are a few borderline designs that are partly free-standing and partly guyed, called additionally guyed towers. Examples:
The first experiments in radio communication were conducted by Guglielmo Marconi beginning in 1894. In 1895–1896 he invented the vertical monopole or Marconi antenna, which was initially a wire suspended from a tall wooden pole. He found that the higher the antenna was suspended, the further he could transmit, the first recognition of the need for height in antennas. Radio began to be used commercially for radiotelegraphic communication around 1900.
The first 20 years of commercial radio were dominated by radiotelegraph stations, transmitting over long distances by using very long wavelengths in the very low frequency band – such long waves that they are nearly unused at present. Because the extreme wavelengths were one to several kilometers long, even the tallest feasible antennas by comparison were still too short, electrically, and consequently had inherently very low radiation resistance (only 5~25 Ohms). In any antenna, low radiation resistance leads to excessive power losses in its surrounding ground system, since the low-resistance antenna cannot effectively compete for power with the high-resistance earth. To partially compensate, radiotelegraph stations used huge capacitively top-loaded flattop antennas consisting of horizontal wires strung between multiple 100–300 meters (330–980 ft) steel towers to increase efficiency.
AM radio broadcasting began around 1920. The allocation of the medium wave frequencies for broadcasting raised the possibility of using single vertical masts without top loading. The antenna used for broadcasting through the 1920s was the T-antenna, which consisted of two masts with loading wires on top, strung between them, requiring twice the construction costs and land area of a single mast. In 1924 Stuart Ballantine published two historic papers which led to the development of the single mast antenna. In the first he derived the radiation resistance of a vertical conductor over a ground plane. He found that the radiation resistance increased to a maximum at a length of 1 / 2 wavelength, so a mast around that length had an input resistance that was much higher than the ground resistance, reducing the fraction of transmitter power that was lost in the ground system without assistance from a capacitive top-load. In a second paper the same year he showed that the amount of power radiated horizontally in ground waves reached a maximum at a mast height of 5 /8 wavelength.
By 1930 the expense of the T-antenna led broadcasters to adopt the mast radiator antenna, in which the metal structure of the mast itself functions as the antenna. One of the first types used was the diamond cantilever or Blaw-Knox tower. This had a diamond (rhombohedral) shape which made it rigid, so only one set of guy lines was needed, at its wide waist. The pointed lower end of the antenna ended in a large ceramic insulator in the form of a ball-and-socket joint on a concrete base, relieving bending moments on the structure. The first, a 665 foot (203 m) half-wave mast was installed at radio station WABC's 50 kW transmitter at Wayne, New Jersey in 1931. During the 1930s it was found that the diamond shape of the Blaw-Knox tower had an unfavorable current distribution which increased the power emitted at high angles, causing multipath fading in the listening area. By the 1940s the AM broadcast industry had abandoned the Blaw-Knox design for the narrow, uniform cross section lattice mast used today, which had a better radiation pattern.