Hubbry Logo
search
logo
Area code 952 avatar
Area code 952
Area code 952
current hub
2059145

Area code 952

logo
Community Hub0 Subscribers
Read side by side
Area code 952
View on Wikipedia
from Wikipedia

Metropolitan area codes with 952 in red.
A map of Minnesota area codes.

Area code 952 is the telephone area code in the North American Numbering Plan (NANP) for the southwestern suburbs of Minneapolis-St. Paul in the U.S. state of Minnesota. The numbering plan area (NPA) includes cities such as Bloomington, Eden Prairie, Edina and Minnetonka. It was created in 2000 along with area code 763 (northwest suburbs) when they were carved out of area code 612, which now only contains Minneapolis and a few inner-ring locales.

The area code splits in the Twin Cities are unusual because they split along municipal lines, rather than central office boundaries. This led to numerous exchanges being divided between two area codes. One central office, the Penn Avenue office in Minneapolis, had its geographical territory divided into area code 612 for portions in Minneapolis; 763 for portions in Golden Valley; and 952 for portions in St. Louis Park. Competitive local exchange carriers serving large portions of the metro area also ended up serving three area codes with the same prefixes.[1][2]

952 is bordered on the north and northeast by 763 and 612 respectively, on the east by area code 651, and by area code 507 to the south. This area is in the Central Time Zone.

Despite the Twin Cities' rapid growth, 952 is nowhere near exhaustion. The April 2025 NANPA projections predict an exhaust date of 2236.[3]

Even with the split into four area codes, most of the Twin Cities region is still a single rate center.[4] The four Twin Cities area codes comprise one of the largest local calling areas in the United States; with a few exceptions, no long-distance charges are applied from one part of the Twin Cities to another. Portions of area codes 320 and 507 are local calls from the Twin Cities as well.

Prior to October 2021, area code 952 had telephone numbers assigned for the central office code 988. In 2020, 988 was designated nationwide as a dialing code for the National Suicide Prevention Lifeline, which created a conflict for exchanges that permit seven-digit dialing. This area code was therefore scheduled to transition to ten-digit dialing by October 24, 2021.[5]

Service area

[edit]

See also

[edit]

References

[edit]
[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

Area code 952

View on Grokipedia
from Grokipedia
Area code 952 is a telephone area code in the North American Numbering Plan (NANP) serving the southwestern suburbs of the Minneapolis–Saint Paul metropolitan area in the U.S. state of Minnesota.[1] It covers portions of Hennepin, Dakota, Scott, and Carver counties.[2] Introduced on February 27, 2000, as part of a geographic split of the original area code 612 to address numbering exhaustion, 952 was one of two new codes created alongside 763 for the northwestern suburbs; the 612 code was retained only for central Minneapolis and nearby areas like Richfield and St. Anthony.[3][1] The split boundary generally followed Interstate 394 to the north and extended southward, encompassing growing suburban communities.[1] This relief was approved by the Minnesota Public Utilities Commission on April 6, 1999, following an initial decision in December 1998, with implementation following recommendations from the Minnesota Department of Commerce to ensure sufficient telephone numbers for the region's expanding population.[1] The area code primarily serves affluent and rapidly developing suburbs, including major cities such as Bloomington (home to the Mall of America), Eden Prairie, Minnetonka, Edina, Burnsville, Apple Valley, Lakeville, Chanhassen, Chaska, and Shakopee.[1][4] It operates in the Central Time Zone (UTC−6) and is the sole area code for its territory, with no overlays planned as of 2024; however, like other Minnesota codes, it requires 10-digit local dialing due to national NANP changes.[4][5] The region's economy, driven by corporate headquarters, technology, and retail, has sustained demand for numbering resources, with projections indicating potential future relief needs.[6]

History

Background and relief planning

Area code 612 was assigned in 1947 as one of the original North American area codes, covering the Minneapolis-Saint Paul metropolitan area and its surrounding suburbs in east-central Minnesota. In 1996, area code 612 was split, with the western portion outside the metropolitan area becoming area code 320, providing initial relief from numbering pressure.[7] At the time, it served the rapidly growing Twin Cities region, which included urban centers and expanding residential communities.[7] The Twin Cities metropolitan area experienced significant population growth and economic expansion throughout the late 20th century, increasing the demand for telephone services. This surge, combined with the proliferation of additional phone lines for fax machines, modems, pagers, and early cellular devices, led to the rapid depletion of available numbers within area code 612. By the mid-1990s, projections indicated that the area code would exhaust its central office prefixes by around 2000, prompting urgent relief planning to accommodate the ongoing demand.[7][1] To address the impending shortage, initial relief efforts focused on a geographic split of area code 612. In 1998, the eastern suburbs, including St. Paul and areas to the east, were separated into the new area code 651, effective for permissive dialing on July 12, 1998, and mandatory 10-digit dialing on January 11, 1999. This split provided temporary relief but did not fully resolve the pressure on the remaining 612 territory, as projections post-split still forecasted exhaustion within approximately 9.5 years without further action.[8][1] The Minnesota Public Utilities Commission (PUC) played a central role in overseeing the relief planning process, initiating Docket No. M-97-506 in 1997 to evaluate options for the 612 area code. Public hearings and stakeholder comments revealed debates between geographic splits, which preserved seven-digit local dialing but required number changes for affected residents and businesses, and overlay plans, which would add a new code atop the existing one to avoid disruptions but mandate 10-digit dialing throughout. Ultimately, the PUC favored additional geographic splits for the western and southern suburbs, leading to the creation of area codes 763 and 952 in 2000.[1][7]

Creation and implementation

The Minnesota Public Utilities Commission approved the geographic split of area code 612 on April 6, 1999, to create two new area codes—763 for the northwestern suburbs and 952 for the southwestern suburbs—retaining 612 for the Minneapolis core and select inner-ring communities including Richfield, Fort Snelling, and St. Anthony.[1] The split was designed to alleviate projected numbering shortages in the rapidly growing Twin Cities suburbs, with boundaries drawn primarily along municipal lines and wire centers to ensure clear geographic separation.[1] Area code 952 was assigned to the region south and west of the Minneapolis core, encompassing communities such as Bloomington and Burnsville up to Interstate 394.[1] Although initial plans called for permissive dialing to begin on December 1, 1999, implementation was postponed, and permissive ten-digit dialing for 952 officially commenced on February 27, 2000, allowing customers a transition period to use either seven- or ten-digit formats for local calls.[1][9] This 11-month dual-dialing phase provided time for telephone systems and customer equipment to adapt without immediate disruption.[9] Ten-digit dialing became mandatory on January 14, 2001, after which seven-digit local calls within the affected regions would no longer connect.[9][10] Telecommunications providers, primarily US West (later acquired by Qwest and now part of CenturyLink), managed the rollout by updating switching equipment, reallocating central office prefixes to the new 952 code to satisfy immediate demand, and launching public awareness campaigns to notify customers of the changes.[1][11] These efforts included printed materials, media announcements, and coordination with business associations to minimize confusion during the transition.[11] The North American Numbering Plan Administrator (NANPA) had reserved 952 in advance, enabling swift assignment of numbering resources projected to last approximately 9.8 years under initial usage forecasts.[1]

Service area

Geographic boundaries

Area code 952 serves a region in south-central Minnesota, encompassing the southwestern suburbs of the Minneapolis–Saint Paul metropolitan area. This territory primarily includes urban and suburban zones within the Twin Cities metro, focusing on areas south and west of central Minneapolis. The boundaries were established during the 2000 split from area code 612 to address numbering exhaustion in the original Minneapolis plan.[12] The northern boundary follows the southern edge of Minneapolis, excluding the downtown core but extending to include adjacent suburbs like Bloomington. To the north and northeast, it abuts area codes 612 and 763, respectively. The eastern limit borders area code 651, tracing irregular lines that align with municipal and county divisions in the metro vicinity. In the south, the area reaches into Dakota County, incorporating locales such as Apple Valley and Lakeville before meeting area code 507. Western edges are similarly defined by local jurisdictional lines, maintaining a focus on the metro fringe without extending into expansive rural territories.[13][14] Spanning approximately 1,000 square miles of developed suburban landscape, the service area deliberately excludes rural expanses beyond the metropolitan boundary to concentrate on high-density population centers. This compact footprint supports efficient telecommunications infrastructure within the urban corridor. The entire region observes the Central Time Zone (UTC−6 standard time, UTC−5 during daylight saving time), aligning with the statewide standard for Minnesota.[14]

Communities and counties served

Area code 952 primarily serves Hennepin County (the majority, including its urban suburbs), Scott County, Carver County, and southern portions of Dakota County in Minnesota.[15] The service area encompasses several major population centers, characterized by suburban development adjacent to the Minneapolis-St. Paul metro. Key cities include Bloomington, a commercial hub home to the Mall of America; Eden Prairie, a center for technology and corporate offices; Minnetonka, an affluent residential community; Edina, known for upscale shopping districts; Burnsville, with diverse retail and industrial zones; Chaska, featuring manufacturing and recreational areas; Shakopee, including gaming and entertainment facilities; and Lakeville, a growing residential suburb. These communities reflect a mix of residential neighborhoods, commercial centers, and light industrial sites, with no rural or exurban areas, emphasizing metro-adjacent expansion.[15]
CityApproximate 2020 Census PopulationKey Characteristics
Bloomington89,987Commercial hub, Mall of America
Eden Prairie64,198Tech and corporate offices
Minnetonka53,781Affluent residential
Edina53,494Upscale shopping
Burnsville64,317Retail and industrial
Chaska27,810Manufacturing and recreation
Shakopee43,698Gaming and entertainment
Lakeville69,490Growing residential suburb
Populations sourced from U.S. Census Bureau, 2020 Decennial Census.[16] Smaller communities served by area code 952 include Prior Lake, Savage, Victoria, and Mound, which contribute to the region's suburban fabric through residential and localized commercial development.[15] The overall demographic profile is predominantly suburban, driven by population growth that necessitated the 2000 split from the 612 area code to accommodate increasing demand for telephone numbers in these expanding areas.[15]
User Avatar
No comments yet.