Community hub
0 subscribers7 pages, 0 posts
Recent from talks
All channels
Be the first to start a discussion here.
Be the first to start a discussion here.
Be the first to start a discussion here.
Be the first to start a discussion here.
Contribute something
Welcome to the community hub built to collect knowledge and have discussions related to Auto reignition.
Nothing was collected or created yet.
Auto reignition
View on Wikipediafrom Wikipedia
 | This article relies largely or entirely on a single source. (November 2025) |
Auto reignition is a process used in gas burners to control ignition devices based on whether a burner flame is lit. This information can be used to stop an ignition device from sparking, which is no longer necessary after the flame is lit. It can also be used to start the sparking device again if the flame goes out while the burner is still supplying gas, for example, from a gust of wind or vibration.[1]
References
[edit]- ^ Smil, Vaclav (2015). Natural Gas: Fuel for the 21st Century. John Wiley & Sons. p. 6. ISBN 978-1-119-01286-3. Retrieved 7 November 2025.
 | This combustion article is a stub. You can help Wikipedia by adding missing information. |