Hubbry Logo
CZ 85CZ 85Main
Open search
CZ 85
Community hub
CZ 85
logo
8 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
CZ 85
CZ 85
from Wikipedia

The CZ 85 is a double-action semi-automatic pistol based on the CZ 75[1] formerly manufactured in Czechoslovakia (now the Czech Republic) by Česká Zbrojovka.

Key Information

Description

[edit]

The CZ 85 is an updated version of the CZ 75, with slight changes made to internal parts to increase reliability.

It has an ambidextrous safety switch and slide stop, making the pistol suitable for both right- and left-handed shooters.

CZ weapons are known for their long service life and high reliability while using various types of cartridges.[1]

The CZ 85 was developed because the CZ 75 had no patents protecting the design, and the CZ 75 was copied in other countries with unlicensed versions.

Variants

[edit]

CZ 85B

[edit]

The CZ 85B is an up-to-date version with a firing pin block safety, squared off trigger guard, a ring hammer, and tri-dot sights.

It is available in 9×19mm and .40 S&W calibers. The 9mm magazines hold 16 rounds and the .40 magazines hold 10.

CZ 85BD

[edit]

CZ 85 B with a decocking lever, instead of a safety

CZ 85 Compact

[edit]

Limited production, compact version of the CZ 85 with under-barrel accessory rail and chambered in .40 S&W.

Identical to the current CZ 75 compact in .40 S&W.

CZ 85 Combat

[edit]

CZ 85 equipped with an adjustable rear sight, extended magazine release, drop-free magazine and overtravel adjustment on the trigger. Lacks a firing pin safety so that firing pins can be replaced without special fitting.

NZ 85B

[edit]

Chinese Norinco copy.

See also

[edit]

References

[edit]
[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia
from Grokipedia
The CZ 85 is a semi-automatic, locked-breech pistol chambered primarily in 9mm Luger, manufactured by Česká zbrojovka a.s. in Uherský Brod, Czechoslovakia (now the Czech Republic), and introduced in 1985 as an ambidextrous evolution of the iconic CZ 75 design. It features a selective double-action/single-action (DA/SA) trigger mechanism, a double-column magazine with a standard capacity of 16 rounds, fixed three-dot sights (with an adjustable rear sight on the Combat variant), and ergonomic polymer grips, making it suitable for both military, law enforcement, and civilian use due to its high reliability, accuracy, and long service life. Overall dimensions include a 120 mm (4.72 in) barrel length, 206 mm (8.11 in) overall length, 138 mm (5.43 in) height, 38 mm (1.50 in) width, and an unloaded weight of approximately 1,000 g (35.27 oz). Developed to address the CZ 75's lack of left-handed accommodations, the CZ 85 incorporates fully ambidextrous controls, including slide stops and safety s on both sides, while retaining the all-steel construction and short-recoil operation of its predecessor. Variants such as the CZ 85 B (introduced in the early with a block safety), CZ 85 BD (featuring a decocking ), and CZ 85 Combat (with enhanced sights and a competition-oriented extended beavertail) expanded its appeal for target shooting and . Production continued until around 2016, with over one million units of the standard-size CZ 75/85 series manufactured by 2014, cementing its status as a durable and influential in global firearms history. The CZ 85's design emphasizes safety and versatility, including options for a manual thumb safety, loaded chamber indicator, and firing pin block, while its robust build supports use with various 9mm types for consistent performance in adverse conditions. Despite its discontinuation, the model remains popular among collectors and enthusiasts for its balance of , firepower, and proven track record in competitive and disciplines.

History

Development

The CZ 85 was introduced in 1985 as an evolutionary update to the pistol, primarily to counter the proliferation of unlicensed copies stemming from the original model's straightforward and unprotected design, which had been widely imitated by manufacturers such as ITM with the AT-84 and Tanfoglio with the TZ-75. This development addressed vulnerabilities in protection while expanding market appeal, particularly , where demand for more user-friendly variants was growing. Development of the CZ 85 took place at Česká zbrojovka in Uherský Brod, , during the early 1980s, with a core focus on incorporating ambidextrous controls to improve for both right- and left-handed shooters and to distinguish the authentic model from imitators. Engineers, building on the foundational platform designed by brothers Josef and František Koucký, prioritized enhancements that maintained the pistol's core double-action/single-action functionality while adding bilateral features. Key design modifications included the addition of an ambidextrous manual safety and , which were rigorously tested for operational reliability across both double-action and single-action firing modes to ensure consistent performance under varied conditions. Initial prototypes underwent extensive evaluation phases at the Uherský Brod facility, simulating military and civilian use scenarios, which ultimately led to formal production approval in 1985 as a refined, protected iteration of the lineage.

Production

Production of the CZ 85 began in at the facilities of Česká zbrojovka in Uherský Brod, , with serial production starting on June 14, 1985, and continued until 2016 following the into the and in 1993. The pistol was manufactured primarily for export markets, with peak output occurring in the 1990s as demand grew in Western countries after the end of the . By 2014, production of the standard-size CZ 75/85 series had exceeded one million units. Over the course of its run, manufacturing techniques evolved to improve efficiency, including the adoption of for certain frame components in later production years to reduce costs while maintaining durability. The CZ 85 was discontinued in due to shifting market preferences toward more modern designs, such as polymer-framed pistols exemplified by models like the CZ 75 SP-01, which offered enhanced ergonomics and lighter weight for contemporary users. This transition allowed Česká zbrojovka to focus on newer lines that better met evolving and civilian demands.

Design

Operating Mechanism

The CZ 85 pistol employs a short recoil-operated, locked-breech system, where the barrel and slide initially move rearward together upon firing before unlocking to complete the cycle. This design utilizes a falling barrel locking mechanism, in which two lugs on the barrel engage corresponding recesses in the ejection port area of the slide to secure the breech during ignition. In the firing sequence, when the strikes the , the resulting pressure propels the down the barrel while the impulse drives the locked barrel and slide rearward a short distance—typically 3 to 5 millimeters. At this point, the pin, acting as a fixed cam on the frame, interacts with a cam surface on the barrel's underside, forcing the rear of the barrel to tilt downward and disengage the locking lugs from the slide. This unlocks , allowing the slide to continue its rearward travel under and the expansion of the spring, which extracts and ejects the spent cartridge case while simultaneously cocking the hammer. The slide then reaches its rearmost position before the recoil spring reverses its motion, propelling the slide forward to strip a new cartridge from the , chamber it, and cam the barrel upward until the lugs re-engage with the slide, readying the for the next shot. The trigger mechanism operates in double-action/single-action (DA/SA) mode, enabling the user to fire the first shot by pulling the trigger to cock and release the —a long, heavy pull of approximately 10 pounds—or to manually cock the for subsequent single-action shots with a shorter, lighter pull of about 4 pounds. Early models of the CZ 85 lack a block safety, instead relying on a block to prevent the from transferring force to the in the event of a drop or accidental release, ensuring the remains safe when carried in DA mode.

Features and Ergonomics

The CZ 85 incorporates ambidextrous manual safety and levers, enabling efficient operation for both left- and right-handed users without requiring any modifications to the . This extends to promoting and ease of use in dynamic scenarios. Additionally, the selective single-action/double-action trigger mechanism allows shooters to choose between a short, light single-action pull for precision or a longer double-action pull for rapid engagement, enhancing overall handling versatility. Constructed entirely from , the CZ 85 provides exceptional durability and a balanced that aids in absorption and control. The factory checkered grip panels deliver a secure, non-slip hold, particularly beneficial during extended firing sessions or in adverse conditions, while contributing to effective management by distributing forces evenly across the shooter's hand. These ergonomic grips, combined with the pistol's instinctive pointing characteristics, support comfortable and intuitive manipulation for a wide range of users. The standard fixed three-dot sights enable rapid and alignment. The squared design further supports practical use by improving compatibility with holsters and allowing for a more natural finger placement during one-handed operation. Complementing these elements, the CZ 85's low minimizes muzzle flip, facilitating quicker recovery and enhanced accuracy on follow-up shots. This operates via a short system, which contributes to the pistol's smooth cycling and reduced perceived .

Specifications

Dimensions and Weight

The CZ 85 pistol features a full-size frame with an overall length of 8.11 inches (206 mm) and a barrel length of 4.72 inches (120 mm). Its height measures 5.43 inches (138 mm), while the width is 1.50 inches (38 mm), providing a balanced profile suitable for target shooting and service use. The unloaded weight of the CZ 85 is 2.21 pounds (1.00 kg) with empty magazine, primarily due to its robust all-steel construction for the frame and slide, which contributes to enhanced durability and recoil management.
SpecificationImperial (inches)Metric (mm)
Overall Length8.11206
Barrel Length4.72120
Height5.43138
Width1.5038
Unloaded Weight2.21 lb1.00 kg
These dimensions are nearly identical to those of the , as the CZ 85 shares the same fundamental frame design with added ambidextrous controls.

Capacity and Caliber

The CZ 85 is primarily chambered in the caliber, a standard military and round known for its balance of and manageable . It employs a double-stack, staggered-column magazine design that enhances reliability in feeding by offsetting cartridges for smoother alignment during the loading cycle, with full compatibility to pistol magazines. The standard holds 16 rounds, allowing for a total of 17 rounds including , though some markets restrict it to 15 rounds or fewer for compliance. An optional variant chambered in uses reduced-capacity 10-round magazines to accommodate the larger cartridge dimensions while maintaining the same staggered-column feeding system. With standard 9mm loads, the delivers a of approximately 381 m/s (1,250 ft/s) from its barrel, supporting an effective firing range of about 50 meters in practical engagements.

Variants

CZ 85B

The CZ 85B serves as the standard production variant of the CZ 85 , incorporating a block mechanism to prevent accidental discharges from drops or impacts. This internal feature was added to enhance reliability and user confidence, distinguishing it from earlier models without such protection. The variant maintains the core double-action/single-action trigger system of its predecessor while introducing minor internal refinements that contribute to a smoother double-action pull, typically measuring around 12-13 pounds with reduced creep. Key ergonomic enhancements in the CZ 85B include a squared , which facilitates a more secure two-handed grip during firing, particularly for defensive or competitive use. It also features a ring-style for easier manipulation and fixed three-dot sights that improve in low-light conditions through quick alignment. These design elements build on the ambidextrous frame-mounted safety and slide release levers inherited from the base CZ 85, promoting usability for both right- and left-handed shooters. Production of the CZ 85B commenced in the early 1990s following the initial CZ 85 rollout in 1985, with manufacturing continuing through 2016 at Česká zbrojovka in Uherský Brod, (later the ). Primarily oriented toward export markets, the model was imported to the by CZ-USA and gained popularity among civilian shooters and law enforcement for its robust all-steel construction and 16-round 9mm capacity. Over its run, the CZ 85B exemplified the evolution of the family toward greater safety and handling precision without altering the fundamental short-recoil operating system. Production of all CZ 85 variants ended in 2016.

CZ 85BD

The CZ 85BD is a tactical variant of the CZ 85B, featuring an ambidextrous decocking lever in place of the manual safety to enable safe, controlled lowering of the from the cocked position without pulling the trigger. This modification supports double-action carry with a chambered round, prioritizing rapid first-shot deployment for users who avoid manual safety engagement during high-stress scenarios. Developed in the 1990s as part of the /85 series evolution, the CZ 85BD incorporates the internal block from the CZ 85B to prevent accidental discharge if dropped, alongside a safety notch for added security. The decocker maintains the pistol in a ready state for double-action operation, with the design emphasizing a smooth double-action trigger pull for reliable performance. It retains core CZ 85B attributes, including ambidextrous and a high-capacity double-stack , making it suitable for professional use where ergonomic versatility is essential. The model has seen adoption in European contexts, valued for its balance of safety features and operational simplicity in tactical roles. Production of all CZ 85 variants ended in 2016.

CZ 85 Compact

The CZ 85 Compact represents a limited-production evolution from the full-size CZ 85B, tailored as a shorter variant for and law enforcement backup duties. Introduced in the 1990s amid rising popularity of the cartridge for its balance of power and controllability, this model was manufactured in small quantities by Česká zbrojovka to address demands for a more portable defensive . Key to its design are the reduced dimensions, including a 3.9-inch barrel and a shortened grip optimized for .40 S&W compatibility, which shaves significant length and height off the standard CZ 85 frame for better concealment without sacrificing the all-steel construction's durability. An integrated under-barrel rail supports accessory attachments like weapon lights or lasers, enhancing low-light utility in backup roles. The pistol preserves the CZ 85's ambidextrous controls, including the safety and , promoting accessibility for varied users. It holds 10 rounds of , providing adequate capacity for a compact platform while prioritizing discretion. The compact form factor, while improving , introduces heavier due to the shorter sight radius and reduced mass absorbing the .40 S&W's , though the steel frame helps manage muzzle flip for follow-up shots. Production of all CZ 85 variants ended in 2016.

CZ 85 Combat

The CZ 85 Combat is a competition-oriented variant developed as an extension of the CZ 85B, incorporating enhancements tailored for sport shooting. It features a fully adjustable rear sight for precise targeting, an extended magazine release for quicker reloads, and drop-free magazines to facilitate efficient magazine changes during competitions. These modifications build on the base model's ambidextrous and safety catch, making it suitable for both right- and left-handed shooters. Produced in limited quantities from 1986 until 2016, the CZ 85 Combat was primarily aimed at civilian sport shooters, with a focus on improved accuracy at extended ranges beyond 25 meters. The adjustable sights and crisp 5-pound single-action trigger contribute to its commendable precision, enabling tight groups of 2 to 4 inches at 25 yards in testing. It retains the standard 9mm Luger caliber and 16-round double-stack magazine capacity, ensuring compatibility with standard ammunition while supporting high-volume sessions with moderate . During the 2000s, the CZ 85 Combat gained popularity among civilian competitors in disciplines like IPSC Production Division, valued for its reliability and ergonomic enhancements before the rise of polymer-framed models shifted preferences in the competitive shooting community. Over 5,000 rounds of testing demonstrated flawless performance across various loads, underscoring its suitability for demanding sport applications.

NZ 85B

The Norinco NZ 85B is a Chinese-manufactured unlicensed copy of the CZ 85 pistol, produced by China North Industries Corporation (Norinco) as an export-oriented model introduced in the 1990s. Based on the original CZ 85 design, it replicates the double-action/single-action trigger mechanism and all-steel construction while incorporating minor modifications for production efficiency. Norinco developed the NZ 85B to provide an affordable alternative in international markets, leveraging the CZ 85's reputation for reliability in a semi-automatic 9mm handgun. Key features of the NZ 85B include a forged and slide with a blued finish, a chrome-lined barrel measuring approximately 113 mm in length, and ambidextrous controls such as a manual thumb safety. It is chambered in and typically ships with 15-round double-stack magazines, maintaining compatibility with the CZ 85's ergonomics like the beavertail grip and low for reduced . While the overall build quality is robust, with high-strength forged components, some examples exhibit minor variances such as sharper edges on controls or a heavier initial trigger pull compared to the original, though these do not significantly impact function. The NZ 85B has been primarily directed toward export markets in and , where Norinco's small arms are widely distributed to meet demand for cost-effective firearms. Its lower production costs allow it to compete on price while offering performance akin to the CZ 85 in terms of durability and accuracy, making it suitable for military, , and civilian applications in resource-limited regions. Distribution has been constrained in some Western countries due to import restrictions on products, limiting its global availability.

Adoption

Military Use

The CZ 85 pistol has experienced limited military adoption, primarily through small-scale exports rather than widespread standard-issue service in national armed forces. According to the Czech Republic's official export control reports, the CZ 85 was included among exported to various recipients in 2011, including 36,703 units of revolvers and semi-automatic pistols overall (with specific models like the CZ 85 listed), to countries such as the (17,764 units), (2,259 units), and (), though in modest quantities that did not lead to major contracts. These exports occurred amid broader concerns over arms transfers to regions with increasing conflict risks during the early .

Civilian and Law Enforcement Use

The CZ 85 found adoption among European law enforcement agencies during the 1990s, notably by Czech municipal police forces such as the , which valued its ergonomic design featuring ambidextrous controls. In civilian markets, particularly , the CZ 85 became popular for and target shooting due to its accuracy and comfortable handling, with imports available from 1986 until production ceased in 2016. The CZ 85 Combat variant has been widely used in (IPSC) Production Division competitions, where it is approved for use and appreciated for its precision—capable of 2-inch groups at 10 yards—and manageable recoil owing to its all-steel frame. Since its discontinuation around 2016, the CZ 85 has emerged as a sought-after collector's item among enthusiasts, bolstered by ongoing aftermarket support including replacement parts, custom triggers, and holsters from specialized suppliers.

References

Add your contribution
Related Hubs
User Avatar
No comments yet.