Community hub
Recent from talks
Contribute something to knowledge base
Content stats: 0 posts, 0 articles, 1 media, 0 notes
Members stats: 0 subscribers, 0 contributors, 0 moderators, 0 supporters
Subscribers
Supporters
Contributors
Moderators
Hub AI
Car crusher AI simulator
(@Car crusher_simulator)
Hub AI
Car crusher AI simulator
(@Car crusher_simulator)
Car crusher
A car crusher is an industrial device used to reduce the dimensions of derelict (depreciated) cars prior to transport for recycling.
Historically, scrap cars were too large and bulky to transport to the sites that turned them into reusable material, and the cost to transport them outweighed their value, because transportation costs were determined by weight. Since uncrushed cars were less dense and took up more space, even for a short haul, the scrap cars were worth less than it cost to deliver them.
Cars can be crushed by dropping heavy weights onto them, or by using an excavator bucket or mechanical grab, but these rudimentary means can be time-consuming and produces inconsistent scrap sizes. By contrast, having a dedicated car-crushing machine speeds up the compacting process and results in more uniform scrap bundles.
Car crushers are essentially a type of hydraulic compactor and subdivide into two basic types; the pancake crusher where the vehicle is flattened vertically into a slab, or the baler which crushes and compresses the vehicle from several directions into a dense rectangular cube or "bale".
Both types can be mounted onto a semi trailer – the transportable mobile car crusher – to allow it to crush and collect vehicles from multiple junkyards who do not own their own machine.
Shredding machines also have a crushing action which will reduce the height of the vehicle before it is finally pulverized into fragments by spinning rotors.
One of the first car crushing machines was invented by Allen B. Sharp and Richard A. Hull, both assignors to Al-Jon Incorporated located in Ottumwa, Iowa. The patent for the machine was filed on March 22, 1965, and patented on August 16, 1966. This United States patent was primarily examined by Walter A. Scheel.
With this car crushing machine, a car is fed through a hydraulically powered jaw and is slowly flattened as it goes through, similar to how a pasta machine flattens pasta dough. The car scraps are flattened into dimensions of six inches tall by five to six feet wide, similar to the length of its original size. The machine's portable design allows it to be transported to any location where cars have been collected, as it is within legal highway transport size limits. The machine can be operated by a single person.
Car crusher
A car crusher is an industrial device used to reduce the dimensions of derelict (depreciated) cars prior to transport for recycling.
Historically, scrap cars were too large and bulky to transport to the sites that turned them into reusable material, and the cost to transport them outweighed their value, because transportation costs were determined by weight. Since uncrushed cars were less dense and took up more space, even for a short haul, the scrap cars were worth less than it cost to deliver them.
Cars can be crushed by dropping heavy weights onto them, or by using an excavator bucket or mechanical grab, but these rudimentary means can be time-consuming and produces inconsistent scrap sizes. By contrast, having a dedicated car-crushing machine speeds up the compacting process and results in more uniform scrap bundles.
Car crushers are essentially a type of hydraulic compactor and subdivide into two basic types; the pancake crusher where the vehicle is flattened vertically into a slab, or the baler which crushes and compresses the vehicle from several directions into a dense rectangular cube or "bale".
Both types can be mounted onto a semi trailer – the transportable mobile car crusher – to allow it to crush and collect vehicles from multiple junkyards who do not own their own machine.
Shredding machines also have a crushing action which will reduce the height of the vehicle before it is finally pulverized into fragments by spinning rotors.
One of the first car crushing machines was invented by Allen B. Sharp and Richard A. Hull, both assignors to Al-Jon Incorporated located in Ottumwa, Iowa. The patent for the machine was filed on March 22, 1965, and patented on August 16, 1966. This United States patent was primarily examined by Walter A. Scheel.
With this car crushing machine, a car is fed through a hydraulically powered jaw and is slowly flattened as it goes through, similar to how a pasta machine flattens pasta dough. The car scraps are flattened into dimensions of six inches tall by five to six feet wide, similar to the length of its original size. The machine's portable design allows it to be transported to any location where cars have been collected, as it is within legal highway transport size limits. The machine can be operated by a single person.
Recent media
Recent media