Community hub
Recent from talks
Knowledge base stats:
Talk channels stats:
Members stats:
Douglas A-26 Invader
The Douglas A-26 Invader (designated B-26 between 1948 and 1965) is an American twin-engined light bomber and ground attack aircraft. Built by Douglas Aircraft Company during World War II, the Invader also saw service during several major Cold War conflicts. A limited number of highly modified United States Air Force aircraft served in Southeast Asia until 1969. It was a fast aircraft capable of carrying a large bomb load. A range of guns could be fitted to produce a formidable ground-attack aircraft.
A redesignation of the type from A-26 to B-26 has led to confusion with the earlier and unrelated medium bomber Martin B-26 Marauder, which had already been withdrawn from service when the designation was reused.
The A-26 was Douglas Aircraft's successor to the A-20 (DB-7) Havoc, also known as Douglas Boston. Designed by Ed Heinemann, Robert Donovan, and Ted R. Smith, the innovative NACA 65-215 laminar-flow airfoil wing of the A-26 was the work of project aerodynamics expert A.M.O. Smith.
The Douglas XA-26 prototype (AAC Ser. No. 41-19504) first flew on 10 July 1942 at Mines Field, El Segundo, with test pilot Benny Howard at the controls. Flight tests revealed excellent performance and handling but engine-cooling problems led to cowling changes and elimination of the propeller spinners on production aircraft. During testing, the nose wheel was found to be structurally inadequate, so it was strengthened.
The early A-26 versions were built in two forms
After about 1,570 production aircraft, three guns were installed in each wing, coinciding with the introduction of the "eight-gun nose" for A-26Bs, giving some versions as many as 14 .50 in (12.7 mm) machine guns in fixed forward mounts. An A-26C nose section could be replaced with an A-26B nose section, or vice versa, in a few hours, thus physically (and officially) changing the designation and operational role. The "flat-topped" canopy was changed in late 1944 after about 820 production aircraft, to a clamshell style with greatly improved visibility.
Alongside the pilot in an A-26B, a crew member served as navigator and gun loader for the pilot-operated nose guns. In an A-26C, that crew member served as navigator and bombardier, and moved to the nose section to bomb. A few A-26Cs were fitted with dual flight controls, some parts of which could be disabled in flight for access to the nose section. Access for the bombardier was through the lower section of the right instrument panel; he normally sat next to the pilot. This was similar to British designs such as the Lancaster, Blenheim/Beaufort and Wellington. A tractor-style "jump seat" was behind the "navigator's seat". In most missions, a third crew member in the rear gunner's compartment operated the remote-controlled dorsal and ventral gun turrets, with access to-and-from the cockpit via the bomb bay only if that was empty. The gunner operated both dorsal and ventral turrets via a novel, complex and unreliable dual-ended periscope sight, a vertical column running through the center of the rear compartment, with traversing and elevating/depressing periscope sights on each end. The gunner sat on a seat facing rearwards looking into a binocular periscope sight mounted on the column, controlling the guns with a pair of handles on the sides of the column. Aimed above the centerline of the aircraft, the mirror in the center of the column 'flipped', showing the gunner a limited view similar to the view the upper periscope was seeing. As he pressed the handles downward, and as the bead passed the centerline, the mirror automatically flipped, transferring the sight "seamlessly" to the lower periscope. The guns aimed in the approximate direction the periscope was aimed, automatically transferring between upper and lower turrets as required, and computing for parallax and other factors. While novel and sound in principle, the developers invested a great deal of time and effort in their attempts to get the system to work, delaying production. As might be expected, the complex system was difficult to maintain in the field.
Douglas officially delivered the first production model A-26B aircraft to the United States Army Air Forces (USAAF) on 10 September 1943. These were sent for field evaluation in actual combat operations, with the Fifth Air Force in the Southwest Pacific theater. The A-26 first saw action on 23 June 1944, when four aircraft attached to the 3rd Bombardment Group's 13th Squadron ("The Grim Reapers"), bombed Japanese-held islands near Manokwari. Aircrew from "The Grim Reapers", while evaluating these four A-26Bs, noted that downward views from the cockpit were significantly hindered by the nature of the design – especially the positioning of the engines – which made the A-26B unsuitable for its intended role of ground attack. In response to such evaluations, General George Kenney, commander of the Far East Air Forces, stated: "We do not want the A-26 under any circumstances as a replacement for anything." Nevertheless, development continued. While the 3rd BG was waiting suitably modified A-26s, it requested additional Douglas A-20 Havocs, although both types were used in composite flights.
Hub AI
Douglas A-26 Invader AI simulator
(@Douglas A-26 Invader_simulator)
Douglas A-26 Invader
The Douglas A-26 Invader (designated B-26 between 1948 and 1965) is an American twin-engined light bomber and ground attack aircraft. Built by Douglas Aircraft Company during World War II, the Invader also saw service during several major Cold War conflicts. A limited number of highly modified United States Air Force aircraft served in Southeast Asia until 1969. It was a fast aircraft capable of carrying a large bomb load. A range of guns could be fitted to produce a formidable ground-attack aircraft.
A redesignation of the type from A-26 to B-26 has led to confusion with the earlier and unrelated medium bomber Martin B-26 Marauder, which had already been withdrawn from service when the designation was reused.
The A-26 was Douglas Aircraft's successor to the A-20 (DB-7) Havoc, also known as Douglas Boston. Designed by Ed Heinemann, Robert Donovan, and Ted R. Smith, the innovative NACA 65-215 laminar-flow airfoil wing of the A-26 was the work of project aerodynamics expert A.M.O. Smith.
The Douglas XA-26 prototype (AAC Ser. No. 41-19504) first flew on 10 July 1942 at Mines Field, El Segundo, with test pilot Benny Howard at the controls. Flight tests revealed excellent performance and handling but engine-cooling problems led to cowling changes and elimination of the propeller spinners on production aircraft. During testing, the nose wheel was found to be structurally inadequate, so it was strengthened.
The early A-26 versions were built in two forms
After about 1,570 production aircraft, three guns were installed in each wing, coinciding with the introduction of the "eight-gun nose" for A-26Bs, giving some versions as many as 14 .50 in (12.7 mm) machine guns in fixed forward mounts. An A-26C nose section could be replaced with an A-26B nose section, or vice versa, in a few hours, thus physically (and officially) changing the designation and operational role. The "flat-topped" canopy was changed in late 1944 after about 820 production aircraft, to a clamshell style with greatly improved visibility.
Alongside the pilot in an A-26B, a crew member served as navigator and gun loader for the pilot-operated nose guns. In an A-26C, that crew member served as navigator and bombardier, and moved to the nose section to bomb. A few A-26Cs were fitted with dual flight controls, some parts of which could be disabled in flight for access to the nose section. Access for the bombardier was through the lower section of the right instrument panel; he normally sat next to the pilot. This was similar to British designs such as the Lancaster, Blenheim/Beaufort and Wellington. A tractor-style "jump seat" was behind the "navigator's seat". In most missions, a third crew member in the rear gunner's compartment operated the remote-controlled dorsal and ventral gun turrets, with access to-and-from the cockpit via the bomb bay only if that was empty. The gunner operated both dorsal and ventral turrets via a novel, complex and unreliable dual-ended periscope sight, a vertical column running through the center of the rear compartment, with traversing and elevating/depressing periscope sights on each end. The gunner sat on a seat facing rearwards looking into a binocular periscope sight mounted on the column, controlling the guns with a pair of handles on the sides of the column. Aimed above the centerline of the aircraft, the mirror in the center of the column 'flipped', showing the gunner a limited view similar to the view the upper periscope was seeing. As he pressed the handles downward, and as the bead passed the centerline, the mirror automatically flipped, transferring the sight "seamlessly" to the lower periscope. The guns aimed in the approximate direction the periscope was aimed, automatically transferring between upper and lower turrets as required, and computing for parallax and other factors. While novel and sound in principle, the developers invested a great deal of time and effort in their attempts to get the system to work, delaying production. As might be expected, the complex system was difficult to maintain in the field.
Douglas officially delivered the first production model A-26B aircraft to the United States Army Air Forces (USAAF) on 10 September 1943. These were sent for field evaluation in actual combat operations, with the Fifth Air Force in the Southwest Pacific theater. The A-26 first saw action on 23 June 1944, when four aircraft attached to the 3rd Bombardment Group's 13th Squadron ("The Grim Reapers"), bombed Japanese-held islands near Manokwari. Aircrew from "The Grim Reapers", while evaluating these four A-26Bs, noted that downward views from the cockpit were significantly hindered by the nature of the design – especially the positioning of the engines – which made the A-26B unsuitable for its intended role of ground attack. In response to such evaluations, General George Kenney, commander of the Far East Air Forces, stated: "We do not want the A-26 under any circumstances as a replacement for anything." Nevertheless, development continued. While the 3rd BG was waiting suitably modified A-26s, it requested additional Douglas A-20 Havocs, although both types were used in composite flights.