Community hub
Recent from talks
Knowledge base stats:
Talk channels stats:
Members stats:
Nvidia Drive
NVIDIA DRIVE is a computer platform by Nvidia, aimed at providing autonomous car and driver assistance functionality powered by deep learning. The platform was introduced at the Consumer Electronics Show (CES) in Las Vegas in January 2015. An enhanced version, the Drive PX 2 was introduced at CES a year later, in January 2016.
The closely platform related software release program at some point in time was branded NVIDIA DRIVE Hyperion along with a revision number helping to match with the generation of hardware it is created for - and also creating ready to order bundles under those term. In former times there were only the terms Nvidia Drive SDK for the developer package and sub-included Nvidia Drive OS for the system software (aka OS) that came with the evaluation platforms or could be downloaded for OS switching and updating later on.
The first of Nvidia's autonomous chips was announced at CES 2015, based on the Maxwell GPU microarchitecture. The line-up consisted of two platforms:
The Drive CX was based on a single Tegra X1 SoC (System on a Chip) and was marketed as a digital cockpit computer, providing a rich dashboard, navigation and multimedia experience. Early Nvidia press releases reported that the Drive CX board will be capable of carrying either a Tegra K1 or a Tegra X1.
The first version of Drive PX is based on two Tegra X1 SoCs, and was an initial development platform targeted at (semi-)autonomous driving cars.
Drive PX platforms based on the Pascal GPU microarchitecture were first announced at CES 2016. This time only a new version of Drive PX was announced, but in multiple configurations.
The Nvidia Drive PX 2 is based on one or two Tegra X2 SoCs where each SoC contains 2 Denver cores, 4 ARM A57 cores and a GPU from the Pascal generation. There are two real world board configurations:
There is further the proposal from Nvidia for fully autonomous driving by means of combining multiple items of the AutoChauffeur board variant and connecting these boards using e.g. UART, CAN, LIN, FlexRay, USB, 1 Gbit Ethernet or 10 Gbit Ethernet. For any derived custom PCB design the option of linking the Tegra X2 Processors via some PCIe bus bridge is further available, according to board block diagrams that can be found on the web.
Hub AI
Nvidia Drive AI simulator
(@Nvidia Drive_simulator)
Nvidia Drive
NVIDIA DRIVE is a computer platform by Nvidia, aimed at providing autonomous car and driver assistance functionality powered by deep learning. The platform was introduced at the Consumer Electronics Show (CES) in Las Vegas in January 2015. An enhanced version, the Drive PX 2 was introduced at CES a year later, in January 2016.
The closely platform related software release program at some point in time was branded NVIDIA DRIVE Hyperion along with a revision number helping to match with the generation of hardware it is created for - and also creating ready to order bundles under those term. In former times there were only the terms Nvidia Drive SDK for the developer package and sub-included Nvidia Drive OS for the system software (aka OS) that came with the evaluation platforms or could be downloaded for OS switching and updating later on.
The first of Nvidia's autonomous chips was announced at CES 2015, based on the Maxwell GPU microarchitecture. The line-up consisted of two platforms:
The Drive CX was based on a single Tegra X1 SoC (System on a Chip) and was marketed as a digital cockpit computer, providing a rich dashboard, navigation and multimedia experience. Early Nvidia press releases reported that the Drive CX board will be capable of carrying either a Tegra K1 or a Tegra X1.
The first version of Drive PX is based on two Tegra X1 SoCs, and was an initial development platform targeted at (semi-)autonomous driving cars.
Drive PX platforms based on the Pascal GPU microarchitecture were first announced at CES 2016. This time only a new version of Drive PX was announced, but in multiple configurations.
The Nvidia Drive PX 2 is based on one or two Tegra X2 SoCs where each SoC contains 2 Denver cores, 4 ARM A57 cores and a GPU from the Pascal generation. There are two real world board configurations:
There is further the proposal from Nvidia for fully autonomous driving by means of combining multiple items of the AutoChauffeur board variant and connecting these boards using e.g. UART, CAN, LIN, FlexRay, USB, 1 Gbit Ethernet or 10 Gbit Ethernet. For any derived custom PCB design the option of linking the Tegra X2 Processors via some PCIe bus bridge is further available, according to board block diagrams that can be found on the web.