Hubbry Logo
EMG 81EMG 81Main
Open search
EMG 81
Community hub
EMG 81
logo
8 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
EMG 81
EMG 81
EMG 81
View on Wikipedia
from Wikipedia
EMG 81
ManufacturerEMG, Inc.
Period1979–present
TypeActive humbucker
Magnet typeCeramic magnet
Output specifications
Voltage (RMS), V3.00
Voltage (peak), V4.50
Noise, dBV-100
Impedance, kΩ10
Current, µA80
Power requirements
Power source9 V battery
Battery life, hours3000
Sonic qualities
Resonant
frequency, Hz		1630

The EMG 81 is a popular active humbucker guitar pickup manufactured by EMG, Inc. It is usually considered a lead pickup for use in the bridge position, paired with EMG's 85 as a rhythm pickup in neck position (Zakk Wylde is famous for this configuration).[1] It's not uncommon, however, to see a guitar with two EMG 81s in both bridge and neck positions (for instance, Kirk Hammett's EMG-KH21 pickup sets, which include two EMG 81 pickups for both neck and bridge positions).

The EMG 81 pickup is preferred as a lead pickup because of its high output and smooth control from having a rail magnet. Rail magnets tend to sound smoother through string bends because they have a constant "rail" that runs through the pickup, while typical guitar pickups have polepieces under each string that lose signal strength as the string bends away from the polepiece. The EMG 81 can be recognized by its dark grey humbucker form-factor and a silver embossed EMG logo.

With its high output, focused mids, consistent tone, tight attack and distinct clarity even under heavy distortion, the EMG 81 is a classic favorite among heavy metal guitar players.

History and design

[edit]

The EMG-81 was developed in 1979 and released to the market in 1981 (hence the model number). Construction is similar to traditional U-shaped pickups, but there are no separate pole pieces; steel bars (rails) are used instead. The Alnico V magnets of earlier discontinued models have been replaced with ceramic ones. While nominal output is the same as current EMG 85, lower noise ratio gives more gain opportunity.

As most other modern EMG pickups, today's EMG-81 has a Quik-connect output, which is a three-pin header on the pickup which comes with a compatible wiring harness. This allows for a less complicated pickup swap in the future, only requiring the removal of the pickup guard and disconnecting the pickup, as opposed to melting the solder and installing the new pickup.

A few variants of the EMG 81 have also been released, such as the TW and X. The 81TW version features two separate pickups and preamps in a single pickup housing, allowing for single-coil and humbucking tones.[2] The 81-X provides increased headroom giving the voicing an organic and open tone while still maintaining clarity and response.

References

[edit]
[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

EMG 81

View on Grokipedia
from Grokipedia
The EMG 81 is an active humbucker guitar pickup manufactured by EMG, Inc., designed primarily for the bridge position to provide high-output tone with detailed intensity, exceptional high-end clarity, and fluid sustain, achieved through powerful ceramic magnets and close-aperture coils. Released in 1981 after development beginning in 1979 alongside the complementary EMG 85 model, it pioneered the widespread adoption of active electronics in guitar pickups, revolutionizing high-gain amplification by offering low noise, consistent output, and enhanced dynamic range without the impedance issues of passive designs. Key technical specifications include a resonant of 2.25 kHz, average output voltage of 1.25 V (peaking at 1.75 V), of 10 kΩ, and current consumption of 80 µA, powered by a 9-volt battery via an integrated circuit featuring a differential op-amp for approximately 14.8 dB of hum rejection. The pickup's construction resembles traditional rail-style humbuckers but incorporates wax-potted coils with around 5,500–6,000 turns and a measuring 56 x 3 x 13 mm, enabling its signature aggressive response ideal for overdriven leads and heavy genres. Widely adopted in the metal scene, the EMG 81 has been a staple for guitarists seeking tight lows, pronounced mids, and searing highs in high-volume settings, with notable users including of and of , who have praised its ability to cut through dense mixes. Variants such as the 81TW (with coil-splitting capabilities) and 81-X (enhanced headroom) have expanded its versatility, maintaining its status as one of EMG's most enduring and influential products.

History and Development

Origins and Invention

EMG Inc. was founded in 1976 by Rob Turner in Long Beach, California, initially operating under the name Dirtywork Studios and concentrating on active electronics to improve signal clarity and reduce noise in musical instruments. The company's early innovations addressed the limitations of passive pickups, which were prone to hum and interference, by integrating onboard preamplifiers powered by batteries. In 1979, EMG developed the EMG 81 as a high-output active pickup, responding to the growing need for amplified, distortion-friendly signals in the emerging rock and metal scenes. This design utilized powerful magnets and close-aperture coils to deliver intense clarity and sustain, setting it apart from traditional passive humbuckers. A key design innovation in the EMG 81 was its rail-style magnet structure, which provided uniform across the strings for smoother sustain and balanced response during bends and high-volume play. The pickup was frequently paired with the EMG 85 in rhythm/lead configurations. Session guitarist of Toto adopted it early for its low-noise characteristics in high-volume recordings.

Release and Early Adoption

The EMG 81 was officially released in alongside the EMG 85, representing a pivotal moment in EMG's transition toward active pickups as a core offering in the guitar market. Developed in 1979, these models introduced a new standard for high-output active humbuckers, quickly becoming standard equipment on Steinberger's innovative headless guitars. This release solidified EMG's focus on active electronics, distinguishing them from traditional passive designs prevalent at the time. Early marketing positioned the EMG 81 as a high-output optimized for high-gain amplification, emphasizing its ability to deliver intense clarity, reduced hum, and enhanced sustain through an onboard preamp and magnet construction. Initial sales targeted professional musicians via established music retailers, appealing to those seeking reliable performance in demanding live and studio environments. The pickup's design, featuring powerful magnets for elevated output, was highlighted as ideal for lead tones in amplified settings. In the early 1980s, the EMG 81 gained its first major endorsements among metal guitarists, with Slayer's integrating it into his setups as the band emerged on the thrash scene around 1983. It also found favor with session players like Toto's , who adopted it for its low-noise characteristics during high-volume recordings. The pickup's integration into custom guitars, particularly models from builders like Jackson and , further accelerated its adoption among players pursuing aggressive, modern tones. Throughout the , the EMG 81 evolved with refinements to its active circuitry, including optimizations for extended battery life on the standard 9V power source, reaching efficiencies noted in mid-decade reviews as supporting up to thousands of hours of use under typical conditions. These updates enhanced its practicality for touring musicians, cementing its role in the burgeoning metal genre.

Design and Construction

Physical Components

The EMG 81 employs a U-shaped rail design centered around a ceramic magnet measuring 56 mm × 3 mm × 13 mm, which provides uniform magnetic flux across the strings for consistent output and helps mitigate microphonics by distributing the field evenly rather than concentrating it at individual poles. Its dual-coil construction uses 43 AWG (0.06 mm diameter) plain enamel insulated wire, with each coil featuring approximately 5,500 to 6,000 turns to achieve a resistance of around 4.18 kΩ per coil; the coils are wax-potted to secure the windings, enhance mechanical stability, and further reduce susceptibility to vibration-induced noise. The magnetic core incorporates solid steel poles sized 54 mm × 3 mm × 12.5 mm, offering a sturdy foundation for the rail structure and efficient flux conduction. Encased in a black plastic housing for protection against environmental wear, the pickup maintains a standard humbucker footprint with dimensions of approximately 70 mm in width and 38 mm in height, facilitating direct compatibility as a drop-in replacement in Gibson-style electric guitars.

Electronics and Circuitry

The EMG 81 features an active onboard designed to amplify the signal from its humbucking coils while minimizing noise, utilizing a configuration based on the EMG001 , which is functionally similar to the LM4250 from . This preamp is implemented on a single-layer surface-mount device (SMD) (PCB) that is fully encapsulated in within the pickup's baseplate, providing protection against environmental factors and facilitating compact integration. The power supply for the EMG 81 is a standard 9-volt battery, delivering a low current draw of approximately 80 µA to achieve an extended operational life of around 3,000 hours for a single pickup installation. Reverse polarity protection is incorporated via a designated as D1 in the circuit, preventing damage from incorrect battery insertion. In the signal path, the preamp processes the differential signal from the coils in a near-parallel wiring arrangement, producing an unbalanced output with approximately 14.8 dB of common-mode hum rejection to reduce electrical interference. Key resistors in the circuit include R8, valued at 1 MΩ, which sets the bias current for the op-amp, and the parallel combination of R4 (68 kΩ) and R5 (68 kΩ), equaling 34 kΩ, contributing to tone modeling by shaping the frequency response. Coupling capacitors C1 and C2 form a high-pass filter with a cutoff around 241 Hz, further refining the signal before output. For installation, the EMG 81 employs a standard three-conductor wiring setup—black (ground), red (battery positive), and white (signal hot)—enabling coil-splitting options when paired with compatible switching systems, and utilizes proprietary solderless EMG connectors for straightforward integration into guitar control cavities without requiring extensive .

Specifications and Performance

Electrical Specifications

The EMG 81 active pickup features an output voltage rated at 3.00 V for excitation and 4.50 V for strumming, providing high-output suitable for amplified applications. In detailed testing, the average output measures 1.25 V, with a maximum of 1.75 V observed under dynamic conditions. The is specified at 10 kΩ, ensuring compatibility with standard guitar amplification systems. The is rated at -100 dBV at 60 Hz, contributing to a clean signal in active configurations, though detailed measurements in controlled tests report -91 dBV. Power requirements include a current consumption of 80 µA when supplied with 9 V DC, supporting extended battery life of approximately 3,000 hours. The maximum supply voltage is 27 V DC. The resonant is 1.63 kHz, with an internal cutoff at 241 Hz that promotes load independence by attenuating low-frequency content and hum. The design incorporates a rail , which aids in delivering a smooth output across the frequency range.
SpecificationValueNotes/Source
Output Voltage (String)3.00 VStandard rating
Output Voltage (Strum)4.50 VStandard rating
Output Voltage (Test Average)1.25 VDynamic test
Output Voltage (Test Max)1.75 VDynamic test
Output Impedance10 kΩ
Noise Floor (60 Hz)-100 dBVStandard rating
Noise Floor (Test)-91 dBVDetailed measurement
Current Consumption80 µAAt 9 V DC
Power Supply9 V DC (max 27 V DC)Alkaline or lithium battery recommended
Resonant Frequency1.63 kHzBaseline
High-Pass Filter Cutoff241 HzFor load independence

Frequency Response and Output

The EMG 81 pickup exhibits a resonant of 1.63 kHz, which emphasizes the while delivering a tight low-end response and a pronounced high-end cut, contributing to its characteristic clarity and articulation in dynamic playing scenarios. This profile allows the pickup to handle vibrations with precision, avoiding muddiness in lower registers and excessive brightness in the treble. The active circuitry provides a buffered output with a low impedance of approximately 10 kΩ, which minimizes loading effects from external amplifiers and cable , ensuring across various setups. This buffering also achieves consistent hum rejection of 14.8 dB, effectively suppressing 60 Hz interference without compromising the overall signal path. In terms of sustain, the EMG 81 delivers fluid and detailed note decay, enhanced by the active preamp's boosting mechanism that maintains signal strength without introducing compression, even at higher gain levels suitable for overdrive applications. The pickup's high output capability reaches up to 4.50 under strum excitation, providing ample headroom for driving amplifiers into while preserving dynamic nuances. Standard testing under controlled string excitation yields an average output of 1.25 V, reflecting the pickup's balanced response to individual note plucks and its efficiency in converting mechanical vibration to electrical signal. This preamp, powered by a 9V battery, enables these performance traits by amplifying the raw coil signal early in the chain, resulting in extended sustain times compared to unboosted designs.

Sound Characteristics

Tonal Qualities

The EMG 81's high-output design produces a sharp, focused with a pronounced attack, making it particularly well-suited for lead playing and cutting through dense mixes in live or recorded settings. This tonal profile stems from its active circuitry and , which contribute to a bright, articulate response that emphasizes note definition without excessive harshness. In high-gain environments, the pickup offers tight low-end control that helps prevent muddiness, allowing for clear chugging rhythms and palm-muted precision typical in metal genres. The highs remain smooth, supporting fluid sustain that enhances runs and long-held notes, while maintaining overall clarity even under heavy . When used for clean tones, the EMG 81 delivers clear and articulate sounds with impressive note separation, providing a reliable foundation for chord work or ambient passages. Under , it yields aggressive, consistent output that drives amplifiers into saturation reliably, though often characterized as somewhat sterile due to its even response. This makes it a staple for metal applications where predictability and power are prioritized over organic warmth. The active buffering in the EMG 81 results in a compressed , which prioritizes consistent volume and sustain over subtle picking nuances, ensuring even performance across playing intensities.

Comparisons to Passive Pickups

The EMG 81, as an active , delivers significantly higher output levels compared to traditional passive humbuckers such as the JB, with a typical string-pluck voltage of 3.00 V and strum voltage of 4.50 V, versus approximately 0.2-0.5 V RMS for most passive designs. This elevated output provides greater drive for high-gain amplification without additional boosting, though it comes at the cost of reduced dynamic warmth and an "organic" feel often associated with passives, which respond more sensitively to pick attack and volume nuances. Active buffering in the EMG 81 converts the high-impedance signal to low impedance (10 kΩ output), preventing tone loss and high-frequency over long cable runs—up to 100 feet without degradation—unlike passive pickups, which suffer from impedance mismatches and capacitance-induced treble beyond 25 feet. The EMG 81's features a pronounced peak at 2.25 kHz, emphasizing clarity and cut for lead tones, in contrast to the broader, more gradual of passives that yields a fuller low-end presence but less focused projection. This mid-forward profile excels in high-volume, distorted settings for tight articulation, yet can render cleaner tones as "sterile" or compressed relative to the airy, responsive character of passives. While the EMG 81 achieves near-silent operation with output noise at -100 dB at 60 Hz—eliminating 60-cycle hum common in passives—its battery dependency introduces a reliability absent in passive systems, as a failing 9V battery (lasting ~3,000 hours) can cause signal drop or total failure mid-performance.

Applications and Variants

Installation and Compatibility

The EMG 81 is designed as a for standard routes in guitars such as models, though guitars like Fender Stratocasters may require routing modifications to accommodate the humbucker size. Installation necessitates a 9V battery cavity, which can often be created or utilized within the existing control cavity if space allows, using a battery clip or holder to secure an alkaline or 9V battery for powering the active electronics. The wiring system employs EMG's proprietary solderless setup with quick-connect 3-pin header cables, where the red wire supplies power from the battery bus, the black wire handles ground, and the white wire carries the signal, enabling options for phase reversal in multi-pickup configurations and coil splitting via push-pull pots if desired. For single-pickup installations, the EMG 81 connects directly to 25kΩ volume and tone pots with a output jack (white to tip, black to sleeve, battery ground to ring); in two-pickup setups, it integrates via the B157 pickup buss for selector switching. The EMG 81 is optimized for the bridge position, where its high output excels for lead tones, and pairs seamlessly with other active EMG models such as the 60 or 85 in the for balanced setups, as all EMG active pickups share the same connector and power requirements. It can be mixed with passive pickups, but this requires careful —using 25kΩ pots for the active circuit versus 500kΩ for passives—to avoid tonal imbalance and signal loss, often achieved through separate volume controls or accessories like the EMG PA-2 preamp. Common modifications include installing a battery clip in the cavity for secure placement and adding or shielding to the control cavity for further , though the active design inherently minimizes hum. A typical installation, including cavity preparation and wiring, takes 1-2 hours for those familiar with guitar .

Notable Variants and Users

The EMG 81TW is a dual-mode variant of the original 81, featuring a built-in single-coil pickup alongside the humbucker configuration, selectable via a push-pull potentiometer for switching between single-coil and humbucking modes while maintaining noise cancellation. This design incorporates separate active preamps for each mode, allowing for greater tonal versatility in high-gain applications. Released in 2008, the 81TW was developed to address the need for coil-splitting functionality without compromising the aggressive output of the standard model. The EMG 81-X represents an updated iteration introduced in 2009, incorporating a refined X-series preamp that provides increased headroom compared to the original, resulting in enhanced organic clarity and dynamic response while preserving the signature tight lows and detailed harmonics. It utilizes a combination of and magnets with close-aperture coils to deliver improved sustain and articulation, particularly suited for modern metal tones requiring both and nuance. The variant also includes an active tone control for high-frequency , mimicking passive designs for more refined shaping. Prominent users of the EMG 81 include , who has long favored the pickup in his guitars, often in the signature ZW set configuration featuring the 81 in the bridge position for its aggressive sustain and pinch-harmonic friendly response. of Metallica employs the 81 in his ESP Explorer models, as seen in signature setups like the KH21 dual-81 system, leveraging its high output for searing leads and rhythmic crunch in thrash and heavy metal contexts. also relied on the 81 in pre-1990s Metallica configurations, installing it in custom ESP Explorer-style guitars for the band's early recordings and tours, where it contributed to the tight, articulate tone defining albums like . The EMG 81 has been integrated into various signature models since the 1980s, notably Zakk Wylde's bullseye-finish Gibson Les Pauls, which pair the 81 with the 85 for a balanced yet ferocious metal setup. Its adoption extends to numerous metal-oriented instruments from brands like ESP and Jackson, where it remains a staple in bridge positions for high-gain amplification.

References

  1. https://www.emgpickups.com/81.html
  2. https://www.electrosmash.com/emg81
  3. https://www.guitarworld.com/features/best-pickups-for-metal
  4. https://www.emgpickups.com/81tw.html
  5. https://reverb.com/news/a-brief-history-of-high-output-pickups
  6. https://www.premierguitar.com/gear/emg-the-active-pickup-makers-celebrate-35-years-of-pioneering-tone
  7. https://www.musicradar.com/news/guitars/in-praise-of-emg-active-pickups-522460
  8. https://www.groundguitar.com/kerry-king-guitar-gear/
  9. https://www.harmonycentral.com/forums/topic/1349080-who-used-emg81-first/
  10. https://jacksoncharvel.fandom.com/wiki/EMG
  11. https://www.muzines.co.uk/articles/emg-pickups/12568
  12. https://www.sweetwater.com/sweetcare/articles/long-battery-last-emg-pickups/
  13. https://www.electrosmash.com/emg81-analysis/guitar/emg81-pickup-analysis.html
  14. http://revolutiondeux.blogspot.com/2012/06/active-pickups-how-do-emg-do-it.html
  15. https://www.thomannmusic.com/emg_81.htm
  16. https://www.emgpickups.com/pub/media/Mageants/p/o/powertips_tricks_0230-0190c.pdf
  17. https://www.emgpickups.com/top-wiring-diagrams
  18. https://images.equipboard.com/uploads/item/manual/14141/emg-81-active-ceramic-humbucker-manual.pdf
  19. https://www.emgpickups.com/pub/media/Mageants/z/w/zw_0230-0108re.pdf
  20. https://www.stewmac.com/electronics/pickups/shop-all-our-pickups/electric-guitar-pickups/emg-81-humbucker/
  21. https://www.sweetwater.com/store/detail/EMG81BK--emg-81-active-ceramic-humbucker-guitar-pickup-black
  22. https://equipboard.com/items/emg-81-active-humbucking-pickup
  23. https://www.guitarworld.com/features/best-humbucker-pickups
  24. https://sound-au.com/articles/guitar-voltage.htm
  25. https://www.sweetwater.com/insync/active-vs-passive-pickups-whats-the-difference-which-is-best/
  26. https://www.emgpickups.com/emg-faq
  27. https://www.seymourduncan.com/blog/latest-updates/active-and-passive-in-the-same-guitar-can-it-be-done
  28. https://sevenstring.org/threads/emg-pickups-sensitive-to-interference-solutions-cavity-shielding.337830/
  29. https://www.youtube.com/watch?v=jeaOeTPHy0c
  30. https://www.sweetwater.com/store/detail/EMG81TWBK--emg-81tw-active-ceramic-coil-splitting-humbucker-guitar-pickup-black
  31. https://www.premierguitar.com/emgs-81tw
  32. https://www.emgpickups.com/81x.html
  33. https://www.amazon.com/EMG-81-X-Active-Guitar-Humbucker/dp/B001RTTC98
  34. https://www.emgpickups.com/zw-set.html
  35. https://www.emgpickups.com/kh21-kirk-hammett-black.html
  36. https://www.emgpickups.com/artist/index/view/id/1
  37. https://www.guitarcenter.com/EMG/ZW-Zakk-Wylde-81-85-Humbucker-Set-Black-1273887998271.gc
  38. https://www.sweetwater.com/store/detail/EMGZWSet--emg-zw-set-zakk-wylde-active-humbucker-pickup-set-black
Add your contribution
Related Hubs
User Avatar
No comments yet.