.jpg/2000px-Chevrolet_Camaro_RS_327_1968_(cropped).jpg)
Recent from talks
Chevrolet Camaro (first generation)
Knowledge base stats:
Talk channels stats:
Members stats:
Chevrolet Camaro (first generation)
The first-generation Chevrolet Camaro is an American pony car introduced by Chevrolet in the fall of 1966 for the 1967 model year. It used a brand-new rear-wheel-drive GM F-body platform and was available as a 2-door, 2+2 seat, hardtop, and convertible. The F-body was shared with the Pontiac Firebird for all generations. A 230 cu in Chevrolet straight-6 was standard, with several Chevy V8s available as options. The first-generation Camaro was built through the 1969 model year.
Almost all of 1967–1969 Camaros were built in the two U.S. assembly plants: Norwood, Ohio, and Van Nuys, California. There were also five non-U.S. Camaro assembly plants in countries that required local assembly and content. These plants were located in the Philippines, Belgium, Switzerland, Venezuela, and Peru.
The debut Camaro's standard drivetrain was a Chevrolet Turbo-Thrift 230 cu in (3.8 L) straight-6 engine rated at 140 hp (104 kW) at 4400 rpm and 220 lb⋅ft (298 N⋅m) of torque at 1600 rpm, coupled to a 3-speed manual transmission.
To keep up with other manufacturers in the ever more crowded pony car niche, a selection of optional base-model and high-performance V8s was offered, as well as a variety of optional manual and automatic transmissions.
Eight different engines were available in the 1967 Camaro, 10 in 1968, and 12 in 1969. Optional transmissions during the first-generation model run included the two-speed "Powerglide" automatic transmission, and a four-speed manual, available with any engine. A three-speed "Turbo Hydra-Matic 350" automatic became available on most V8s starting in 1968. The optional automatic for SS 396 cars was the three-speed Turbo 400. In 1969, a semi-automatic "Torque-Drive" two-speed transmission was available on six-cylinder models.
The Camaro was offered in three main optional packages:
The 1967 styling was done by the same team that had designed the 1965 second-generation Corvair. The Camaro shared the subframe / semi-unibody design with the 1968 Chevy II Nova. Almost 80 factory-and 40 dealer-installed options were offered, including the RS, SS, and Z/28 main trim packages.
The SS included a 350 cu in (5.7 L) producing 295 bhp (299 PS; 220 kW) at 4800 rpm and 380 lb⋅ft (515 N⋅m) at 3200 rpm of torque; and the L35 and L78 396 cu in (6.5 L) big-block V8 engines producing 325 bhp (330 PS; 242 kW) or 375 bhp (380 PS; 280 kW) at 5600 rpm and 415 lb⋅ft (563 N⋅m) at 3600 rpm of torque were available. The SS featured non-functional air inlets on the hood, special striping, and SS badging on the grille, front fenders, gas cap, and horn button. In 1967, a Camaro RS/SS convertible with a 396 engine paced the Indianapolis 500; 100 replicas were sold to the public.
Hub AI
Chevrolet Camaro (first generation) AI simulator
(@Chevrolet Camaro (first generation)_simulator)
Chevrolet Camaro (first generation)
The first-generation Chevrolet Camaro is an American pony car introduced by Chevrolet in the fall of 1966 for the 1967 model year. It used a brand-new rear-wheel-drive GM F-body platform and was available as a 2-door, 2+2 seat, hardtop, and convertible. The F-body was shared with the Pontiac Firebird for all generations. A 230 cu in Chevrolet straight-6 was standard, with several Chevy V8s available as options. The first-generation Camaro was built through the 1969 model year.
Almost all of 1967–1969 Camaros were built in the two U.S. assembly plants: Norwood, Ohio, and Van Nuys, California. There were also five non-U.S. Camaro assembly plants in countries that required local assembly and content. These plants were located in the Philippines, Belgium, Switzerland, Venezuela, and Peru.
The debut Camaro's standard drivetrain was a Chevrolet Turbo-Thrift 230 cu in (3.8 L) straight-6 engine rated at 140 hp (104 kW) at 4400 rpm and 220 lb⋅ft (298 N⋅m) of torque at 1600 rpm, coupled to a 3-speed manual transmission.
To keep up with other manufacturers in the ever more crowded pony car niche, a selection of optional base-model and high-performance V8s was offered, as well as a variety of optional manual and automatic transmissions.
Eight different engines were available in the 1967 Camaro, 10 in 1968, and 12 in 1969. Optional transmissions during the first-generation model run included the two-speed "Powerglide" automatic transmission, and a four-speed manual, available with any engine. A three-speed "Turbo Hydra-Matic 350" automatic became available on most V8s starting in 1968. The optional automatic for SS 396 cars was the three-speed Turbo 400. In 1969, a semi-automatic "Torque-Drive" two-speed transmission was available on six-cylinder models.
The Camaro was offered in three main optional packages:
The 1967 styling was done by the same team that had designed the 1965 second-generation Corvair. The Camaro shared the subframe / semi-unibody design with the 1968 Chevy II Nova. Almost 80 factory-and 40 dealer-installed options were offered, including the RS, SS, and Z/28 main trim packages.
The SS included a 350 cu in (5.7 L) producing 295 bhp (299 PS; 220 kW) at 4800 rpm and 380 lb⋅ft (515 N⋅m) at 3200 rpm of torque; and the L35 and L78 396 cu in (6.5 L) big-block V8 engines producing 325 bhp (330 PS; 242 kW) or 375 bhp (380 PS; 280 kW) at 5600 rpm and 415 lb⋅ft (563 N⋅m) at 3600 rpm of torque were available. The SS featured non-functional air inlets on the hood, special striping, and SS badging on the grille, front fenders, gas cap, and horn button. In 1967, a Camaro RS/SS convertible with a 396 engine paced the Indianapolis 500; 100 replicas were sold to the public.
Recent media