Community hub
0 subscribers7 pages, 0 posts
Recent from talks
All channels
Be the first to start a discussion here.
Be the first to start a discussion here.
Be the first to start a discussion here.
Be the first to start a discussion here.
Contribute something
Welcome to the community hub built to collect knowledge and have discussions related to Flame-start system.
Nothing was collected or created yet.
Flame-start system
View on Wikipediafrom Wikipedia
 | This article needs additional citations for verification. (December 2014) |
The flame-start system is a cold start aid for starting diesel engines at low ambient temperatures. It reduces the white smoke emission after the engine is started. In addition, it reduces the strain on the starter motor and batteries by shortening the start-up time.[1]
Usually, the suction intake air is heated up in commercial vehicles to improve the starting capacity and emissions. The heating power requirement in large capacity diesel engines leads here to the use of flame starting systems,[2] with a small diesel burner in the air intake acting as a heater.[3]
References
[edit]- ^ Dan (2019-01-31). "Ducato Cold Start / Flame Start system explained". Motor-Roam. Retrieved 2022-07-28.
- ^ "Cold-Start Aids for Commercial Vehicles | BorgWarner Ludwigsburg GMBH". Archived from the original on 2014-12-13. Retrieved 2014-12-12.
- ^ "Flame Start System" (PDF). Equipmanuals.com. Columbus, Indiana: Cummins Inc. p. 1. Retrieved 28 October 2022.