Gaia catalogues

The Gaia catalogues are star catalogues created using the results obtained by Gaia space telescope.

The catalogues are released in stages that will contain increasing amounts of information; the early releases also miss some stars, especially fainter stars located in dense star fields. Data from every data release can be accessed at the Gaia archive.

The Initial Gaia Source List (IGSL) is a star catalogue of 1.2 billion objects created in support of the Gaia mission. The mission should have delivered a catalogue based entirely on its own data. For the first catalogue, Gaia DR1, a way was needed to be able to assign the observations to an object and to compare them with the objects from other star catalogues. For this purpose, a separate catalog of objects from several other catalogues was compiled, which roughly represents the state of knowledge of astronomy at the beginning of the Gaia mission.

The Attitude Star Catalog is a subset of the IGSL, required for the first approximation in the iterative evaluation of the Gaia data. A first version was created in 2013, a more refined version in April 2014. In total, the Attitude Star Catalog contains 8,173,331 entries with information on position, proper motion and magnitude. Starting with Gaia DR2, the Attitude Star Catalog was replaced with a new list generated from the Gaia Main Data Base (MDB), using the same criteria.

IGSL contains a list of about 200 stars of different spectral classes and magnitudes needed for calibration of the photometric measurements. It is the result of the Gaia Spectrophotometric Standard Stars Survey (SPSS), a selection of stars using Earth-based data in advance of the Gaia mission. Previous catalogues for calibrating magnitudes could not be used for the mission because many of these objects are too bright for Gaia to detect. It was anticipated that some of the stars selected may be previously unrecognized doubles or variable stars that would need to be deleted from the catalogue; for this reason the list contains more stars than necessary. For Gaia EDR3 (Early Data Release 3), a selection was made from more than 100,000 objects that were used for the calibration. These are well-observed objects selected according to Stetson Secondary Standards, but only Gaia data were used.

A list of quasars based on the Large Quasar Astrometric Catalog was prepared for IGSL. This in turn goes back to the Sloan Digital Sky Survey. From the more than one million objects, a selection of 150,000 quasars was made, which are in the region of Gaia's magnitude limit. The selected objects are already well observed and documented. In most cases, quasars are very far away, so that their proper motions and parallaxes are negligibly small.

Gaia Ecliptic Pole Catalogue (GEPC) was created for measuring the poles. The southern part of the catalogue was compiled from observations made with the MPG/ESO telescope at the Max Planck Institute for Astronomy in La Silla, Chile. It contains precise positions, UBV I photometry for the southern field and the corresponding magnitudes. The northern part was created with the Canada–France–Hawaii Telescope on Mauna Kea, Hawaii.

The GEPC v3.0 catalogue contains 612,946 objects from a field of one square degree each at the north and south poles. The north pole is relatively sparse and contains 164,468 objects, while the south pole is still in the region of the Large Magellanic Cloud and contains 448,478 objects. The GEPC data was needed right at the beginning of the mission for the initial calibration. The commissioning phase of the Gaia space probe ended on July 18, 2014. This was followed by a calibration phase of 28 days, during which the ecliptic poles were measured intensively. During this time, Gaia was operated in Ecliptic Poles Scan Law mode (EPSL), in which the two poles were measured twice during each revolution. The initial catalogue was used for Gaia DR1 to match Gaia-found objects to previous star catalogues.