Recent from talks
Heckler & Koch HK21
Knowledge base stats:
Talk channels stats:
Members stats:
Heckler & Koch HK21
The Heckler & Koch HK21 is a German 7.62×51mm NATO general-purpose machine gun, developed in 1961 by small arms manufacturer Heckler & Koch and based on the HK G3 battle rifle. The machine gun is in use with the armed forces of several Asian, African and Latin American countries. It was also license-manufactured by Fábrica de Braço de Prata in Portugal as the m/968 and in Mexico by SEDENA as the MG21. In the German military (Bundeswehr) and the federal police (Bundespolizei) it is designated "G8".
The HK21 is a selective fire roller-delayed blowback-operated firearm with a semi-rigid locking mechanism designed to retard the rearward movement of the bolt. This delay was achieved by artificially increasing the inertia of the bolt by using an angular, interposed transmission system, installed symmetrically to the bore axis, with two cylindrical rollers acting as transmission elements against a movable locking piece which drives the heavy bolt carrier. The two-piece bolt assembly consists of a bolt head, which contains the aforementioned rollers, and a supporting locking piece and bolt carrier. During the "unlocking" sequence, the bolt head receives the recoil impulse from the ignited cartridge and exerts rearward pressure against the rollers, seated in recesses in the barrel extension. The rollers are driven inward against angled ramps of the barrel extension and interact with the wedge-shaped locking piece, projecting it backwards. Thus a chambering dependent (4:1 for 7.62×51mm NATO) or (3:1 for 5.56×45mm NATO) transmission ratio is maintained (as long as the rollers move on the inclined surfaces of the barrel extension and locking piece) of the bolt carrier and locking piece relative to the bolt head; the bolt head carrier travels backwards significantly faster than the bolt head, ensuring a safe drop of pressure within the barrel prior to extraction. Since extraction is carried-out under relatively high pressure, the barrel's chamber received a series of flutes designed to help free the bloated cartridge casing from the chamber wall. Like the G3 and HK33 assault rifle bolts the HK21 bolt features an anti-bounce mechanism that prevents the bolt from bouncing off the barrel's breech surface. The "bolt head locking lever" is a spring-loaded claw mounted on the bolt carrier that grabs the bolt head as the bolt carrier group goes into battery. The lever essentially ratchets into place with friction, providing enough resistance to being re-opened that the bolt carrier does not rebound. The spring-powered claw extractor is also contained inside the bolt while the lever ejector is located inside the trigger housing (actuated by the recoiling bolt).
The reliable functioning of roller-delayed blowback mechanisms is limited by specific ammunition and arm parameters like bullet weight, propellant charge, barrel length and amount of wear. For obtaining a proper and safe functioning parameters bandwidth Heckler & Koch offer a variety of locking pieces with different mass and shoulder angles. The angles are critical and determine the unlock timing and pressure curve progression as the locking pieces act in unison with the bolt head carrier.
The HK21 uses a modified G3 receiver that has been extended to the front sight base. It can be equipped with a detachable bipod (mounted either in front of the feed mechanism or at the muzzle), a tripod, or configured for vehicle mounts. The HK21 has close to a 48% parts interchangeability with the G3. The bolt features a spring-powered extractor and an anti-bounce device that prevents the bolt head from glancing off the barrel extension upon forward return of the locking assembly. The lever-type ejector system is contained in the trigger group housing and is actuated with every shot by the recoiling bolt. The machine gun has a hammer striker and is fired from the closed bolt position, rare for general purpose machine guns. Firing from a closed bolt contributes to accurate fire, but is disadvantageous for heat dissipation. The trigger group, which is integrated with the pistol grip and hinged from the receiver, is equipped with a fire control selector switch (selector lever in the "E" or "1" position – semi-automatic fire, "F" or "20" – continuous fire mode) that doubles as a manual safety (rotating the lever into the "S" or "0" setting disables the trigger, machine gun is considered "safe").
The HK21 has a free-floating, heavy, quick-change barrel fitted with a slotted flash suppressor. The firearm is equipped with an iron sight line that consist of a rotary rear drum and hooded front post. The rear aperture sight is mechanically adjustable for both windage and elevation from 100 to 1,200 m (109 to 1,312 yd) in 100 m (109 yd) increments for 7.62×51mm NATO models or 100 to 1,000 m (109 to 1,094 yd) in 100 m (109 yd) increments for 5.56×45mm NATO models.
By simply swapping out several components such as the barrel, bolt and feed plate unit, the machine gun can be quickly converted to the intermediate 7.62×39mm and 5.56×45mm NATO chamberings.
The machine gun feeds from the left-hand side through a variety of disintegrating metallic link ammunition belt types: the American M13 linked belt, the German DM6 counterpart to the M13 or the German non-disintegrating metallic link DM1 belt. The ratcheting wheel feed unit was designed as an easily removable module that is inserted into the bottom portion of the feed block (installed in place of the standard magazine well), below the barrel axis. As a result of this configuration (the bolt passes over the belt), the ammunition belt is aligned upside down compared to most other belt-fed machine guns (that is, the links face downward). The feed mechanism is actuated by the reciprocating movement of the bolt; a curved cam slot on the bottom of the bolt engages an actuator in the feed mechanism, rotating the double sprockets and positioning a new round in the feed path. Simple conversion from belt to magazine feed is possible by installing an adapter in the feed block which enables the use of H&K's proprietary 20-round box magazine (from the G3 rifle) or a 50-round drum magazine.
In the early 1970s the HK21's design was simplified and the feed mechanism was modified. The machine gun's weight was increased, a carrying handle and a hooked buttstock with improved buffer mechanism were also added. The barrels were internally revised to polygonal rifling. Since then, the HK21 was offered in two main variants: the HK21A1 general-purpose machine gun (with a different belt feed mechanism) and the HK11A1 light machine gun. (optimized for magazine feed only). The HK11A1 proved more successful in export sales and was adopted by the Hellenic Army and several African and Asian armies. Both machine guns, as in the original HK21, can be converted to chamber the 5.56×45mm NATO round by replacing the appropriate components.
Hub AI
Heckler & Koch HK21 AI simulator
(@Heckler & Koch HK21_simulator)
Heckler & Koch HK21
The Heckler & Koch HK21 is a German 7.62×51mm NATO general-purpose machine gun, developed in 1961 by small arms manufacturer Heckler & Koch and based on the HK G3 battle rifle. The machine gun is in use with the armed forces of several Asian, African and Latin American countries. It was also license-manufactured by Fábrica de Braço de Prata in Portugal as the m/968 and in Mexico by SEDENA as the MG21. In the German military (Bundeswehr) and the federal police (Bundespolizei) it is designated "G8".
The HK21 is a selective fire roller-delayed blowback-operated firearm with a semi-rigid locking mechanism designed to retard the rearward movement of the bolt. This delay was achieved by artificially increasing the inertia of the bolt by using an angular, interposed transmission system, installed symmetrically to the bore axis, with two cylindrical rollers acting as transmission elements against a movable locking piece which drives the heavy bolt carrier. The two-piece bolt assembly consists of a bolt head, which contains the aforementioned rollers, and a supporting locking piece and bolt carrier. During the "unlocking" sequence, the bolt head receives the recoil impulse from the ignited cartridge and exerts rearward pressure against the rollers, seated in recesses in the barrel extension. The rollers are driven inward against angled ramps of the barrel extension and interact with the wedge-shaped locking piece, projecting it backwards. Thus a chambering dependent (4:1 for 7.62×51mm NATO) or (3:1 for 5.56×45mm NATO) transmission ratio is maintained (as long as the rollers move on the inclined surfaces of the barrel extension and locking piece) of the bolt carrier and locking piece relative to the bolt head; the bolt head carrier travels backwards significantly faster than the bolt head, ensuring a safe drop of pressure within the barrel prior to extraction. Since extraction is carried-out under relatively high pressure, the barrel's chamber received a series of flutes designed to help free the bloated cartridge casing from the chamber wall. Like the G3 and HK33 assault rifle bolts the HK21 bolt features an anti-bounce mechanism that prevents the bolt from bouncing off the barrel's breech surface. The "bolt head locking lever" is a spring-loaded claw mounted on the bolt carrier that grabs the bolt head as the bolt carrier group goes into battery. The lever essentially ratchets into place with friction, providing enough resistance to being re-opened that the bolt carrier does not rebound. The spring-powered claw extractor is also contained inside the bolt while the lever ejector is located inside the trigger housing (actuated by the recoiling bolt).
The reliable functioning of roller-delayed blowback mechanisms is limited by specific ammunition and arm parameters like bullet weight, propellant charge, barrel length and amount of wear. For obtaining a proper and safe functioning parameters bandwidth Heckler & Koch offer a variety of locking pieces with different mass and shoulder angles. The angles are critical and determine the unlock timing and pressure curve progression as the locking pieces act in unison with the bolt head carrier.
The HK21 uses a modified G3 receiver that has been extended to the front sight base. It can be equipped with a detachable bipod (mounted either in front of the feed mechanism or at the muzzle), a tripod, or configured for vehicle mounts. The HK21 has close to a 48% parts interchangeability with the G3. The bolt features a spring-powered extractor and an anti-bounce device that prevents the bolt head from glancing off the barrel extension upon forward return of the locking assembly. The lever-type ejector system is contained in the trigger group housing and is actuated with every shot by the recoiling bolt. The machine gun has a hammer striker and is fired from the closed bolt position, rare for general purpose machine guns. Firing from a closed bolt contributes to accurate fire, but is disadvantageous for heat dissipation. The trigger group, which is integrated with the pistol grip and hinged from the receiver, is equipped with a fire control selector switch (selector lever in the "E" or "1" position – semi-automatic fire, "F" or "20" – continuous fire mode) that doubles as a manual safety (rotating the lever into the "S" or "0" setting disables the trigger, machine gun is considered "safe").
The HK21 has a free-floating, heavy, quick-change barrel fitted with a slotted flash suppressor. The firearm is equipped with an iron sight line that consist of a rotary rear drum and hooded front post. The rear aperture sight is mechanically adjustable for both windage and elevation from 100 to 1,200 m (109 to 1,312 yd) in 100 m (109 yd) increments for 7.62×51mm NATO models or 100 to 1,000 m (109 to 1,094 yd) in 100 m (109 yd) increments for 5.56×45mm NATO models.
By simply swapping out several components such as the barrel, bolt and feed plate unit, the machine gun can be quickly converted to the intermediate 7.62×39mm and 5.56×45mm NATO chamberings.
The machine gun feeds from the left-hand side through a variety of disintegrating metallic link ammunition belt types: the American M13 linked belt, the German DM6 counterpart to the M13 or the German non-disintegrating metallic link DM1 belt. The ratcheting wheel feed unit was designed as an easily removable module that is inserted into the bottom portion of the feed block (installed in place of the standard magazine well), below the barrel axis. As a result of this configuration (the bolt passes over the belt), the ammunition belt is aligned upside down compared to most other belt-fed machine guns (that is, the links face downward). The feed mechanism is actuated by the reciprocating movement of the bolt; a curved cam slot on the bottom of the bolt engages an actuator in the feed mechanism, rotating the double sprockets and positioning a new round in the feed path. Simple conversion from belt to magazine feed is possible by installing an adapter in the feed block which enables the use of H&K's proprietary 20-round box magazine (from the G3 rifle) or a 50-round drum magazine.
In the early 1970s the HK21's design was simplified and the feed mechanism was modified. The machine gun's weight was increased, a carrying handle and a hooked buttstock with improved buffer mechanism were also added. The barrels were internally revised to polygonal rifling. Since then, the HK21 was offered in two main variants: the HK21A1 general-purpose machine gun (with a different belt feed mechanism) and the HK11A1 light machine gun. (optimized for magazine feed only). The HK11A1 proved more successful in export sales and was adopted by the Hellenic Army and several African and Asian armies. Both machine guns, as in the original HK21, can be converted to chamber the 5.56×45mm NATO round by replacing the appropriate components.
Recent media