Recent from talks
Truck classification
Knowledge base stats:
Talk channels stats:
Members stats:
Truck classification
Truck classifications are typically based upon the maximum loaded weight of the truck, typically using the gross vehicle weight rating (GVWR) and sometimes also the gross trailer weight rating (GTWR), and can vary among jurisdictions.
In the United States, commercial truck classification is determined based on the vehicle's gross vehicle weight rating (GVWR). The classes are numbered 1 through 8. Trucks are also classified more broadly by the Federal Highway Administration (FHWA), which groups classes 1 and 2 as light duty, 3 through 6 as medium duty, and 7 and 8 as heavy duty. The Environmental Protection Agency (EPA) has a separate system of emissions classifications for trucks. The United States Census Bureau also assigned classifications in its Vehicle Inventory and Use Survey (VIUS) (formerly Truck Inventory and Use Survey (TIUS)).
United States federal law requires drivers to have a commercial driver's license (CDL) to operate heavy-duty vehicles (Class 7 and 8) in commerce, with the exception of emergency vehicles and vehicles strictly used for recreational and/or agricultural purposes, though it allows states to require a CDL for these vehicles under their discretion. A CDL is also required to operate any vehicle that transports at least 16 passengers (including the driver) or hazardous materials requiring placards under federal and state law regardless of the weight of the vehicle. States may extend CDL requirements for additional vehicles, for example, New York requires a CDL to operate a stretched limousine and California requires a CDL for any vehicle with three or more axles that has a gross vehicle weight rating of over 6,000 pounds.
When light-duty trucks were first produced in the United States, they were rated by their payload capacity in tons: 1⁄2 (1000 pounds), 3⁄4 (1500 pounds) and 1-ton (2000 pounds). Ford had introduced the "One-Tonner" in 1938 to their line of trucks. The "Three-quarter-tonner" appeared in the Ford truck lineup in 1939. Over time, payload capacities for most domestic pickup trucks have increased while the ton titles have stayed the same. The 1948 Ford F-1 had a Gross Vehicle Weight Rating (GVWR) of 4700 pounds. The truck was marketed with a "Nominal Tonnage Rating: Half-Ton." The actual cargo capacity had increased to 1450 pounds. Ford adopted this promotional nomenclature in 1948 to assist buyers, sellers, and users. The now-imprecise ton rating has continued since the post World War II era to compare standard sizes, rather than actual capacities. In 1975, a change in U.S. emission laws required any vehicle under 6000 pounds GVWR to burn unleaded fuel. U.S. pickup truck manufacturers responded with a "heavy half" pickup of over 6000 pounds GVWR. The F-150 had a capacity of over 2000 pounds, compared to 1500 pounds for the F-100.
This has led to categorizing trucks similarly, even if their payload capacities are different. The Chevrolet Silverado/GMC Sierra 1500, Ford F-150, Nissan Titan, Ram 1500, and Toyota Tundra are called "half-ton" pickups (1⁄2-ton). The Chevrolet Silverado/GMC Sierra 2500, Ford F-250, and Ram 2500 are called "three-quarter-ton" pickups. The Chevrolet Silverado/GMC Sierra 3500, Ford F-350, and Ram 3500 are known as "one ton" pickups.
Similar schemes exist for vans and SUVs (e.g. a 1-ton Dodge Van or a 1⁄2-ton GMC Suburban), medium duty trucks (e.g. the 11⁄2-ton Ford F-550) and some military vehicles, like the ubiquitous deuce-and-a-half.
Some pickup trucks may be marketed as heavy duty (eg Ram Heavy Duty), super duty (eg Ford Super Duty) or simply "HD". This is not to be confused with the truck classification of class 7 and 8 being heavy duty.
The Class 8 truck gross vehicle weight rating (GVWR) is a vehicle with a GVWR exceeding 33,000 lb (14,969 kg). These include tractor trailer tractors, single-unit dump trucks of a GVWR over 33,000 lb, as well as non-commercial chassis fire trucks; such trucks typically have 3 or more axles. The typical 5-axle tractor-trailer combination, also called a "semi" or "18-wheeler", is a Class 8 vehicle. Standard trailers vary in length from 8 ft (2.4 m) containers to 57 ft (17 m) van trailers, with the most common length being the 53 ft (16 m) trailer. Specialized trailers for oversized loads can be considerably longer. Commercial operation of a Class 8 vehicle in the United States requires either a Class-B CDL for non-combination vehicles, or a Class-A CDL for combination vehicles (tractor-trailers). Industries that generally use Class 8 trucks are long-distance freight transportation, construction, and heavy equipment moving.
Hub AI
Truck classification AI simulator
(@Truck classification_simulator)
Truck classification
Truck classifications are typically based upon the maximum loaded weight of the truck, typically using the gross vehicle weight rating (GVWR) and sometimes also the gross trailer weight rating (GTWR), and can vary among jurisdictions.
In the United States, commercial truck classification is determined based on the vehicle's gross vehicle weight rating (GVWR). The classes are numbered 1 through 8. Trucks are also classified more broadly by the Federal Highway Administration (FHWA), which groups classes 1 and 2 as light duty, 3 through 6 as medium duty, and 7 and 8 as heavy duty. The Environmental Protection Agency (EPA) has a separate system of emissions classifications for trucks. The United States Census Bureau also assigned classifications in its Vehicle Inventory and Use Survey (VIUS) (formerly Truck Inventory and Use Survey (TIUS)).
United States federal law requires drivers to have a commercial driver's license (CDL) to operate heavy-duty vehicles (Class 7 and 8) in commerce, with the exception of emergency vehicles and vehicles strictly used for recreational and/or agricultural purposes, though it allows states to require a CDL for these vehicles under their discretion. A CDL is also required to operate any vehicle that transports at least 16 passengers (including the driver) or hazardous materials requiring placards under federal and state law regardless of the weight of the vehicle. States may extend CDL requirements for additional vehicles, for example, New York requires a CDL to operate a stretched limousine and California requires a CDL for any vehicle with three or more axles that has a gross vehicle weight rating of over 6,000 pounds.
When light-duty trucks were first produced in the United States, they were rated by their payload capacity in tons: 1⁄2 (1000 pounds), 3⁄4 (1500 pounds) and 1-ton (2000 pounds). Ford had introduced the "One-Tonner" in 1938 to their line of trucks. The "Three-quarter-tonner" appeared in the Ford truck lineup in 1939. Over time, payload capacities for most domestic pickup trucks have increased while the ton titles have stayed the same. The 1948 Ford F-1 had a Gross Vehicle Weight Rating (GVWR) of 4700 pounds. The truck was marketed with a "Nominal Tonnage Rating: Half-Ton." The actual cargo capacity had increased to 1450 pounds. Ford adopted this promotional nomenclature in 1948 to assist buyers, sellers, and users. The now-imprecise ton rating has continued since the post World War II era to compare standard sizes, rather than actual capacities. In 1975, a change in U.S. emission laws required any vehicle under 6000 pounds GVWR to burn unleaded fuel. U.S. pickup truck manufacturers responded with a "heavy half" pickup of over 6000 pounds GVWR. The F-150 had a capacity of over 2000 pounds, compared to 1500 pounds for the F-100.
This has led to categorizing trucks similarly, even if their payload capacities are different. The Chevrolet Silverado/GMC Sierra 1500, Ford F-150, Nissan Titan, Ram 1500, and Toyota Tundra are called "half-ton" pickups (1⁄2-ton). The Chevrolet Silverado/GMC Sierra 2500, Ford F-250, and Ram 2500 are called "three-quarter-ton" pickups. The Chevrolet Silverado/GMC Sierra 3500, Ford F-350, and Ram 3500 are known as "one ton" pickups.
Similar schemes exist for vans and SUVs (e.g. a 1-ton Dodge Van or a 1⁄2-ton GMC Suburban), medium duty trucks (e.g. the 11⁄2-ton Ford F-550) and some military vehicles, like the ubiquitous deuce-and-a-half.
Some pickup trucks may be marketed as heavy duty (eg Ram Heavy Duty), super duty (eg Ford Super Duty) or simply "HD". This is not to be confused with the truck classification of class 7 and 8 being heavy duty.
The Class 8 truck gross vehicle weight rating (GVWR) is a vehicle with a GVWR exceeding 33,000 lb (14,969 kg). These include tractor trailer tractors, single-unit dump trucks of a GVWR over 33,000 lb, as well as non-commercial chassis fire trucks; such trucks typically have 3 or more axles. The typical 5-axle tractor-trailer combination, also called a "semi" or "18-wheeler", is a Class 8 vehicle. Standard trailers vary in length from 8 ft (2.4 m) containers to 57 ft (17 m) van trailers, with the most common length being the 53 ft (16 m) trailer. Specialized trailers for oversized loads can be considerably longer. Commercial operation of a Class 8 vehicle in the United States requires either a Class-B CDL for non-combination vehicles, or a Class-A CDL for combination vehicles (tractor-trailers). Industries that generally use Class 8 trucks are long-distance freight transportation, construction, and heavy equipment moving.