Community hub
0 subscribers8 pages, 0 posts
Recent from talks
All channels
Be the first to start a discussion here.
Be the first to start a discussion here.
Be the first to start a discussion here.
Be the first to start a discussion here.
Contribute something
Welcome to the community hub built to collect knowledge and have discussions related to InCa3D.
Nothing was collected or created yet.
InCa3D
View on Wikipediafrom Wikipedia
InCa3D is a simulation tool dedicated to electrical connection modelling for both:
The software employs finite element analysis based on the PEEC Partial element equivalent circuit method [3] which proved to be efficient to solve Maxwell's equations in low and middle frequency, thanks to its ability to convert interconnections geometry into equivalent RLC circuit,[4] thus avoiding polygonal meshing of the air around the device.
InCa3D is developed in France (in collaboration with G2ELab) and distributed by Altair Engineering Inc.[5]
Main application fields
[edit]InCa3D is well suited for modelling the behaviour of various connectors:
- from ICs, small wire bonds and PCBs tracks,
- up to bus bars, power modules and large distribution switchboards.
References
[edit]- ^ EMC Modeling of an Industrial Variable Speed Drive With an Adapted PEEC Method[dead link] IEEE Magnetics Society, Aug. 2010]
- ^ EMC analysis of static converters by the extraction of a complete equivalent circuit via a dedicated PEEC method 8th International Symposium on Electric and Magnetic Fields, Mondovi : Italy (2009)]
- ^ A. E. Ruehli: Equivalent Circuit Models for Three-Dimensional Multiconductor Systems, IEEE Transactions on Microwave Theory and Techniques, Vol. 22 (1974), Nr. 3
- ^ MoM and PEEC Method to Reach a Complete Equivalent Circuit of a Static Converter[dead link] 2009 20th International Zurich Symposium, Jan. 2009]
- ^ MoM and PEEC Method to Reach a Complete Equivalent Circuit of a Static Converter, 2009 20th International Zurich Symposium, Jan. 2009