Recent from talks
Medium endurance cutter
Knowledge base stats:
Talk channels stats:
Members stats:
Medium endurance cutter
The Medium Endurance Cutter or WMEC is a type of United States Coast Guard Cutter mainly consisting of the 270-foot (82 m) Famous- and 210-foot (64 m) Reliance-class cutters. These larger cutters are under control of Area Commands (Atlantic Area or Pacific Area). These cutters have adequate accommodations for crew to live on board and can do 6 to 8 week patrols.
Other ships in the WMEC classification are the 282-foot (86 m) USCGC Alex Haley, and the now-decommissioned 213-foot (65 m) USCGC Acushnet, and 230-foot (70 m) USCGC Storis, and 205-foot (62 m) USCGC Tamaroa which began as the United States Navy Cherokee-class fleet tug USS Zuni launched in 1943.
There are 13 vessels in the Famous class, and 12 vessels still in active US service in the Reliance class. The Coast Guard plans to eventually phase out the vessels in both of these cutter classes and replace them with the Offshore Patrol Cutter as part of the Integrated Deepwater System Program.
After World War II, the United States Coast Guard used the US Navy hull classification system. The large, sea-going cutters were classified primarily as Coast Guard gunboats (WPG), destroyer escorts (WDE), and seaplane tenders (WAVP). In 1965 the Coast Guard adopted its own designation system and these large cutters were then referred to as Coast Guard High Endurance Cutters (WHEC). The coastal cutters once known as Cruising Cutters, Second Class and then as Coast Guard patrol craft (WPC) were now Coast Guard Medium Endurance Cutters (WMEC)."
The Famous-class vessels have hull numbers in the range from WMEC-901 through WMEC-913. Entering service in the 1980s, the Famous-class cutters were designed as replacements for the 327-foot (100 m) Treasury-class cutters, and their mission profile emphasized law enforcement, particularly patrolling the newly established 200-mile (320 km) exclusive economic zone.
The Coast Guard harvested weapons systems components from decommissioned Oliver Hazard Perry-class frigates to save money. Harvesting components from four decommissioned frigates resulted in more than $24 million in cost savings, which increased with parts from more decommissioned frigates. Equipment such as the Mark 75, 76 mm/62 caliber gun mounts, gun control panels, barrels, launchers, junction boxes, and other components from decommissioned Oliver Hazard Perry-class frigates were returned to service aboard Famous-class cutters in order to extend their service lives into the 2030s.
The service life extension (SLEP) program for eight cutters of the class started in July 2021 with prototype work for electrical and structural systems on the Seneca and Harriet Lane. Additionally, Harriet Lane served as the prototype for the replacement of the main gun with a Mk38 Mod 3 25mm machine gun. The production phase of the SLEP, which will be carried out on Spencer, Legare, Campbell, Forward, Escanaba and Tahoma, covers four main areas: the electrical, structural and weapons systems work prototyped on Seneca and Harriet Lane and finally replacement of the main propulsion Diesel engines. The last SLEP is expected to be complete by 2030.
The Reliance-class vessels have hull numbers in the range from WMEC-615 through WMEC-630. Entering service between 1964 and 1969, the Reliance-class cutters were meant to replace the 125-foot (38 m) cutters of the Prohibition era and were the first major cutter replacement project since the 255-foot (78 m) Owasco-class cutters from World War II.
Hub AI
Medium endurance cutter AI simulator
(@Medium endurance cutter_simulator)
Medium endurance cutter
The Medium Endurance Cutter or WMEC is a type of United States Coast Guard Cutter mainly consisting of the 270-foot (82 m) Famous- and 210-foot (64 m) Reliance-class cutters. These larger cutters are under control of Area Commands (Atlantic Area or Pacific Area). These cutters have adequate accommodations for crew to live on board and can do 6 to 8 week patrols.
Other ships in the WMEC classification are the 282-foot (86 m) USCGC Alex Haley, and the now-decommissioned 213-foot (65 m) USCGC Acushnet, and 230-foot (70 m) USCGC Storis, and 205-foot (62 m) USCGC Tamaroa which began as the United States Navy Cherokee-class fleet tug USS Zuni launched in 1943.
There are 13 vessels in the Famous class, and 12 vessels still in active US service in the Reliance class. The Coast Guard plans to eventually phase out the vessels in both of these cutter classes and replace them with the Offshore Patrol Cutter as part of the Integrated Deepwater System Program.
After World War II, the United States Coast Guard used the US Navy hull classification system. The large, sea-going cutters were classified primarily as Coast Guard gunboats (WPG), destroyer escorts (WDE), and seaplane tenders (WAVP). In 1965 the Coast Guard adopted its own designation system and these large cutters were then referred to as Coast Guard High Endurance Cutters (WHEC). The coastal cutters once known as Cruising Cutters, Second Class and then as Coast Guard patrol craft (WPC) were now Coast Guard Medium Endurance Cutters (WMEC)."
The Famous-class vessels have hull numbers in the range from WMEC-901 through WMEC-913. Entering service in the 1980s, the Famous-class cutters were designed as replacements for the 327-foot (100 m) Treasury-class cutters, and their mission profile emphasized law enforcement, particularly patrolling the newly established 200-mile (320 km) exclusive economic zone.
The Coast Guard harvested weapons systems components from decommissioned Oliver Hazard Perry-class frigates to save money. Harvesting components from four decommissioned frigates resulted in more than $24 million in cost savings, which increased with parts from more decommissioned frigates. Equipment such as the Mark 75, 76 mm/62 caliber gun mounts, gun control panels, barrels, launchers, junction boxes, and other components from decommissioned Oliver Hazard Perry-class frigates were returned to service aboard Famous-class cutters in order to extend their service lives into the 2030s.
The service life extension (SLEP) program for eight cutters of the class started in July 2021 with prototype work for electrical and structural systems on the Seneca and Harriet Lane. Additionally, Harriet Lane served as the prototype for the replacement of the main gun with a Mk38 Mod 3 25mm machine gun. The production phase of the SLEP, which will be carried out on Spencer, Legare, Campbell, Forward, Escanaba and Tahoma, covers four main areas: the electrical, structural and weapons systems work prototyped on Seneca and Harriet Lane and finally replacement of the main propulsion Diesel engines. The last SLEP is expected to be complete by 2030.
The Reliance-class vessels have hull numbers in the range from WMEC-615 through WMEC-630. Entering service between 1964 and 1969, the Reliance-class cutters were meant to replace the 125-foot (38 m) cutters of the Prohibition era and were the first major cutter replacement project since the 255-foot (78 m) Owasco-class cutters from World War II.