Network-to-network interface

This article may be too technical for most readers to understand. Please help improve it to make it understandable to non-experts, without removing the technical details. (April 2010) (Learn how and when to remove this message)

In telecommunications, a network-to-network interface (NNI) is an interface that specifies signaling and management functions between two networks. An NNI circuit can be used for interconnection of signalling (e.g., SS7), Internet Protocol (IP) (e.g., MPLS) or ATM networks.^[1]

In networks based on MPLS or GMPLS, NNI is used for the interconnection of core provider routers (class 4 or higher).

In the case of GMPLS, the type of interconnection can vary across Back-to-Back, EBGP or mixed NNI connection scenarios, depending on the type of VRF exchange used for interconnection. In case of Back-to-Back, VRF is necessary to create VLANs and subsequently sub-interfaces (VLAN headers and DLCI headers for Ethernet and Frame Relay network packets) on each interface used for the NNI circuit. In the case of eBGP NNI interconnection, IP routers are taught how to dynamically exchange VRF records without VLAN creation.

NNI also can be used for interconnection of two VoIP nodes. In cases of mixed or full-mesh scenarios, other NNI types are possible.^[2]

NNI interconnection is encapsulation independent, but Ethernet and Frame Relay are commonly used.^[3]

• User–network interface
• Asynchronous Transfer Mode

This computer networking article is a stub. You can help Wikipedia by expanding it.

• v
• t
• e