PC-98

The PC-9800 series, commonly shortened to PC-98 or simply 98 (キューハチ, Kyū-hachi), is a lineup of Japanese 16-bit and 32-bit personal computers manufactured by NEC from 1982 to 2003. While based on standard x86-16 and x86-32 processors, it uses an in-house architecture making it incompatible with IBM clones; some PC-98 computers used NEC's own V30 processor. The platform established NEC's dominance in the Japanese personal computer market, and, by 1999, more than 18 million units had been sold. While NEC did not market these specific machines in the West, it sold the NEC APC series, which had similar hardware to early PC-98 models.

The PC-98 was initially released as a business-oriented personal computer which had backward compatibility with the successful PC-8800 series. The range of the series was expanded, and in the 1990s it was used in a variety of industry fields including education and hobbies. NEC succeeded in attracting third-party suppliers and a wide range of users, and the PC-98 dominated the Japanese PC market with more than 60% market share by 1991. IBM clones lacked sufficient graphics capabilities to easily handle Japan's multiple writing systems, in particular kanji with its thousands of characters. In addition, Japanese computer manufacturers marketed personal computers that were based on each proprietary architecture for the domestic market. Global PC manufacturers, with the exception of Apple, had failed to overcome the language barrier, and the Japanese PC market was isolated from the global market.

By 1990, average CPUs and graphics capabilities were sufficiently improved. The DOS/V operating system enabled IBM clones to display Japanese text by using a software font only, giving a chance for global PC manufacturers to enter the Japanese PC market. The PC-98 is a non-IBM compatible x86-based computer and is thus capable of running ported (and localized) versions of MS-DOS and Microsoft Windows. However, as Windows spread, software developers no longer had to code their software separately for each specific platform. An influx of cheaper clone computers by American vendors, and later the popularity of Windows 95 reducing the demand for PC-98 legacy applications, led to NEC abandoning compatibility with the PC-98 platform in 1997 and releasing the PC98-NX series [ja] of Wintel computers, based on the PC System Design Guide.

NEC developed mainframes since the 1950s. By 1976, the company had the 4th highest mainframe sales (10.4%) in Japan after IBM (29.6%), Fujitsu (20.1%) and Hitachi (15.8%). NEC did not have a presence in the consumer market, and its subsidiary, New Nippon Electric (later NEC Home Electronics), had limited success with consumer products. NEC's Information Processing Group, which developed mainframes and minicomputers, had not developed a personal computer because they assumed microprocessors were not suitable for computing as they suffered from a lack of performance and reliability. However, the Electronic Device Sales Division developed the microprocessor evaluation kit TK-80, which became unexpectedly popular among hobbyists. Tomio Gotō (後藤 富雄), a developer of the TK-80, observed the rise in popularity of personal computers at the 1977 West Coast Computer Faire in San Francisco. Goto and his section manager, Kazuya Watanabe (渡邊 和也), decided to develop a personal computer despite criticism from the Information Processing Group. The division only had a small distribution network of electronic parts stores, so they asked New Nippon Electric to sell the personal computers through their consumer distribution network.

The Electronic Device Sales Division launched the PC-8001 in 1979, and it dominated 40% of the Japanese personal computer market in 1981. The vice president of NEC, Atsuyoshi Ōuchi (大内 淳義), stated:

It is sure that we cannot deny contributions of Electronic Devices Group as a parent of the personal computer. However, if personal computers are considered computers, Information Processing Group should handle them in NEC. Also, if personal computers are considered home electronics, we cannot deny a proposal from New Nippon Electric.

In April 1981, NEC decided to expand their personal computer lines into three groups: New Nippon Electric, the Information Processing Group, and the Electronic Devices Group, with each specializing in a particular series. New Nippon Electric made 8-bit home computers (PC-6000 series), while the Information Processing Group made 16-bit business personal computers and the Electronic Devices Group made other personal computers such as the PC-8000, the PC-8800 and the PC-100 series.

In the Information Processing Small Systems Division, Shunzō Hamada (浜田 俊三) directed the project and Noboru Ozawa (小澤 昇) did the product planning. The development team initially planned for the new personal computer to be a small version of the business computer line which originated from the 1973 NEAC System 100. Kazuya Watanabe stated that the personal computer must have Microsoft BASIC, considered compatibility of peripheral devices with previous NEC PCs, and disclosed specifications of its expansion slot. In September 1981, Hamada requested ASCII's Kazuhiko Nishi to rewrite N88-BASIC to run on the Intel 8086 processor, and Nishi replied, saying that he wanted to talk with Bill Gates. Three months later, Nishi rejected Hamada's request because Microsoft was busy with the development of GW-BASIC, and they did not want to produce more variants of Microsoft BASIC. Nishi told him, "Microsoft is rewriting a BASIC that has the same function with more structured internal code, and it will be sold as the definitive 16-bit version named GW-BASIC. We'll provide a BASIC sooner if you choose the Japanese adoption of GW BASIC." Hamada replied, "As I said, we want a BASIC that is compatible with the previous ones." They could not make an agreement.