Piper J-3 Cub

The Piper J-3 Cub is an American light aircraft that was built between 1938 and 1947 by Piper Aircraft. The aircraft has a simple, lightweight design, which gives it good low-speed handling properties and short-field performance. The Cub is Piper Aircraft's second most-produced model after the PA-28 Cherokee series (>32,000 produced) with over 20,000 built in the United States. Its simplicity, affordability and popularity invokes comparisons to the Ford Model T automobile.

The aircraft is a high-wing, strut-braced monoplane with a large-area rectangular wing. It is most often powered by an air-cooled, flat-4 piston engine driving a fixed-pitch propeller. Its fuselage is a welded steel frame covered in fabric, seating two people in tandem.

The Cub was designed as a trainer. It had great popularity in this role and as a general aviation aircraft. Due to its performance, it was well suited for a variety of military uses such as reconnaissance, liaison and ground control. It was produced in large numbers during World War II as the L-4 Grasshopper. Many Cubs are still flying today. Cubs are highly prized as bush aircraft.

The aircraft's standard chrome yellow paint came to be known as "Cub Yellow" or "Lock Haven Yellow".

The Taylor E-2 Cub first appeared in 1930, built by Taylor Aircraft in Bradford, Pennsylvania. Sponsored by William T. Piper, a Bradford industrialist and investor, the affordable E-2 was meant to encourage greater interest in aviation. Later in 1930, the company went bankrupt, with Piper buying the assets, but keeping founder C. Gilbert Taylor on as president. In 1936, an earlier Cub was altered by employee Walter Jamouneau to become the J-2 while Taylor was on sick leave. Some believed the "J" stood for Jamouneau, while aviation historian Peter Bowers concluded the letter simply followed the E, F, G and H models, with the letter "I" skipped because it could be mistaken for the numeral "1". When he saw the redesign, Taylor was so incensed that he fired Jamouneau. Piper, however, had encouraged Jamouneau's changes and hired him back. Piper then bought Taylor's share in the company, paying him $250 per month for three years.

Although sales were initially slow, about 1,200 J-2s were produced before a fire in the Piper factory, a former silk mill in Bradford, Pennsylvania, ended its production in 1938. After Piper moved his company from Bradford to Lock Haven, Pennsylvania, the J-3, which featured further changes by Jamouneau, replaced the J-2. The changes integrated the vertical fin of the tail into the rear fuselage structure and covered it simultaneously with each of the fuselage's sides, changed the rearmost side window's shape to a smoothly curved half-oval outline and placed a steerable tailwheel at the rear end of the J-2's leaf spring-style tailskid, linked for its steering function to the lower end of the rudder with springs and lightweight chains to either end of a double-ended rudder control horn. Powered by a 40 hp (30 kW) engine, in 1938, it sold for just over $1,000.

Several alternative air-cooled engines, typically flat-fours, powered the J-3 Cubs, designated J3C when using the Continental A series, J3F using the Franklin 4AC, and J3L with the Lycoming O-145. Very few examples, designated J3P, were equipped with Lenape Papoose 3-cylinder radial engines.

The outbreak of hostilities in Europe in 1939, along with the growing realization that the United States might soon be drawn into World War II, resulted in the formation of the Civilian Pilot Training Program (CPTP). The Piper J-3 Cub became the primary trainer aircraft of the CPTP and played an integral role in its success, achieving legendary status. About 75% of all new pilots in the CPTP (from a total of 435,165 graduates) were trained in Cubs. By war's end, 80% of all United States military pilots had received their initial flight training in Piper Cubs.