Preston Pipe Bridge
Preston Pipe Bridge
Main page
876828

Preston Pipe Bridge

logo
Community Hub0 subscribers
What are your thoughts?
Be the first to start a discussion here.
Be the first to start a discussion here.
Preston Pipe Bridge

54°32′02″N 1°19′23″W / 54.534°N 1.323°W / 54.534; -1.323

The Preston Pipe Bridge carries three water pipes across the River Tees between Ingleby Barwick and Preston-on-Tees in the borough of Stockton-on-Tees, northern England. The bridge is situated over 3.1 miles (5 km) upriver from Stockton town centre, and some 660 feet (200 m) upriver from Jubilee Bridge.

Preston Pipe Bridge is a 210 feet (64 m) span tied arch bridge with concrete abutments and supplies water to southern Teesside.

The bridge was built in 1959 by constructor Dowsett to carry two 33-inch (84 cm) diameter water pipes across the Tees. The bridge arch, weighing 200 tonnes was assembled on the Durham bank from prefabricated parts and rolled out across the river on a temporary Bailey bridge, then moved sideways onto its pre-prepared concrete abutments.

A third pipe was added in 1979 and there is strictly no public access across the bridge. The bridge is best accessed on foot from the Jubilee Bridge along the river bank. The additional third pipe allowed for the removal a nearby single pipe bridge.

See all
User Avatar
No comments yet.