Recent from talks
Program optimization
Knowledge base stats:
Talk channels stats:
Members stats:
Program optimization
In computer science, program optimization, code optimization, or software optimization is the process of modifying a software system to make some aspect of it work more efficiently or use fewer resources. In general, a computer program may be optimized so that it executes more rapidly, or to make it capable of operating with less memory storage or other resources, or draw less power.
Although the term "optimization" is derived from "optimum", achieving a truly optimal system is rare in practice, which is referred to as superoptimization. Optimization typically focuses on improving a system with respect to a specific quality metric rather than making it universally optimal. This often leads to trade-offs, where enhancing one metric may come at the expense of another. One frequently cited example is the space-time tradeoff, where reducing a program’s execution time can increase its memory consumption. Conversely, in scenarios where memory is limited, engineers might prioritize a slower algorithm to conserve space. There is rarely a single design that can excel in all situations, requiring programmers to prioritize attributes most relevant to the application at hand. Metrics for software include throughput, latency, volatile memory usage, persistent storage, internet usage, energy consumption, and hardware wear and tear. The most common metric is speed.
Furthermore, achieving absolute optimization often demands disproportionate effort relative to the benefits gained. Consequently, optimization processes usually slow once sufficient improvements are achieved. Fortunately, significant gains often occur early in the optimization process, making it practical to stop before reaching diminishing returns.
Optimization can occur at a number of levels. Typically the higher levels have greater impact, and are harder to change later on in a project, requiring significant changes or a complete rewrite if they need to be changed. Thus optimization can typically proceed via refinement from higher to lower, with initial gains being larger and achieved with less work, and later gains being smaller and requiring more work. However, in some cases overall performance depends on performance of very low-level portions of a program, and small changes at a late stage or early consideration of low-level details can have outsized impact. Typically some consideration is given to efficiency throughout a project – though this varies significantly – but major optimization is often considered a refinement to be done late, if ever. On longer-running projects there are typically cycles of optimization, where improving one area reveals limitations in another, and these are typically curtailed when performance is acceptable or gains become too small or costly. Best practices for optimization during iterative development cycles include continuous monitoring for performance issues coupled with regular performance testing.
As performance is part of the specification of a program – a program that is unusably slow is not fit for purpose: a video game with 60 Hz (frames-per-second) is acceptable, but 6 frames-per-second is unacceptably choppy – performance is a consideration from the start, to ensure that the system is able to deliver sufficient performance, and early prototypes need to have roughly acceptable performance for there to be confidence that the final system will (with optimization) achieve acceptable performance. This is sometimes omitted in the belief that optimization can always be done later, resulting in prototype systems that are far too slow – often by an order of magnitude or more – and systems that ultimately are failures because they architecturally cannot achieve their performance goals, such as the Intel 432 (1981); or ones that take years of work to achieve acceptable performance, such as Java (1995), which achieved performance comparable with native code only with HotSpot (1999). The degree to which performance changes between prototype and production system, and how amenable it is to optimization, can be a significant source of uncertainty and risk.
At the highest level, the design may be optimized to make best use of the available resources, given goals, constraints, and expected use/load. The architectural design of a system overwhelmingly affects its performance. For example, a system that is network latency-bound (where network latency is the main constraint on overall performance) would be optimized to minimize network trips, ideally making a single request (or no requests, as in a push protocol) rather than multiple roundtrips. Choice of design depends on the goals: when designing a compiler, if fast compilation is the key priority, a one-pass compiler is faster than a multi-pass compiler (assuming same work), but if speed of output code is the goal, a slower multi-pass compiler fulfills the goal better, even though it takes longer itself. Choice of platform and programming language occur at this level, and changing them frequently requires a complete rewrite, though a modular system may allow rewrite of only some component – for example, for a Python program one may rewrite performance-critical sections in C. In a distributed system, choice of architecture (client-server, peer-to-peer, etc.) occurs at the design level, and may be difficult to change, particularly if all components cannot be replaced in sync (e.g., old clients).
Given an overall design, a good choice of efficient algorithms and data structures, and efficient implementation of these algorithms and data structures comes next. After design, the choice of algorithms and data structures affects efficiency more than any other aspect of the program. Generally data structures are more difficult to change than algorithms, as a data structure assumption and its performance assumptions are used throughout the program, though this can be minimized by the use of abstract data types in function definitions, and keeping the concrete data structure definitions restricted to a few places. Changes in data structures mapped to a database may require schema migration and other complex software or infrastructure changes.
For algorithms, this primarily consists of ensuring that algorithms are constant O(1), logarithmic O(log n), linear O(n), or in some cases log-linear O(n log n) in the input (both in space and time). Algorithms with quadratic complexity O(n2) fail to scale, and even linear algorithms cause problems if repeatedly called, and are typically replaced with constant or logarithmic if possible.
Hub AI
Program optimization AI simulator
(@Program optimization_simulator)
Program optimization
In computer science, program optimization, code optimization, or software optimization is the process of modifying a software system to make some aspect of it work more efficiently or use fewer resources. In general, a computer program may be optimized so that it executes more rapidly, or to make it capable of operating with less memory storage or other resources, or draw less power.
Although the term "optimization" is derived from "optimum", achieving a truly optimal system is rare in practice, which is referred to as superoptimization. Optimization typically focuses on improving a system with respect to a specific quality metric rather than making it universally optimal. This often leads to trade-offs, where enhancing one metric may come at the expense of another. One frequently cited example is the space-time tradeoff, where reducing a program’s execution time can increase its memory consumption. Conversely, in scenarios where memory is limited, engineers might prioritize a slower algorithm to conserve space. There is rarely a single design that can excel in all situations, requiring programmers to prioritize attributes most relevant to the application at hand. Metrics for software include throughput, latency, volatile memory usage, persistent storage, internet usage, energy consumption, and hardware wear and tear. The most common metric is speed.
Furthermore, achieving absolute optimization often demands disproportionate effort relative to the benefits gained. Consequently, optimization processes usually slow once sufficient improvements are achieved. Fortunately, significant gains often occur early in the optimization process, making it practical to stop before reaching diminishing returns.
Optimization can occur at a number of levels. Typically the higher levels have greater impact, and are harder to change later on in a project, requiring significant changes or a complete rewrite if they need to be changed. Thus optimization can typically proceed via refinement from higher to lower, with initial gains being larger and achieved with less work, and later gains being smaller and requiring more work. However, in some cases overall performance depends on performance of very low-level portions of a program, and small changes at a late stage or early consideration of low-level details can have outsized impact. Typically some consideration is given to efficiency throughout a project – though this varies significantly – but major optimization is often considered a refinement to be done late, if ever. On longer-running projects there are typically cycles of optimization, where improving one area reveals limitations in another, and these are typically curtailed when performance is acceptable or gains become too small or costly. Best practices for optimization during iterative development cycles include continuous monitoring for performance issues coupled with regular performance testing.
As performance is part of the specification of a program – a program that is unusably slow is not fit for purpose: a video game with 60 Hz (frames-per-second) is acceptable, but 6 frames-per-second is unacceptably choppy – performance is a consideration from the start, to ensure that the system is able to deliver sufficient performance, and early prototypes need to have roughly acceptable performance for there to be confidence that the final system will (with optimization) achieve acceptable performance. This is sometimes omitted in the belief that optimization can always be done later, resulting in prototype systems that are far too slow – often by an order of magnitude or more – and systems that ultimately are failures because they architecturally cannot achieve their performance goals, such as the Intel 432 (1981); or ones that take years of work to achieve acceptable performance, such as Java (1995), which achieved performance comparable with native code only with HotSpot (1999). The degree to which performance changes between prototype and production system, and how amenable it is to optimization, can be a significant source of uncertainty and risk.
At the highest level, the design may be optimized to make best use of the available resources, given goals, constraints, and expected use/load. The architectural design of a system overwhelmingly affects its performance. For example, a system that is network latency-bound (where network latency is the main constraint on overall performance) would be optimized to minimize network trips, ideally making a single request (or no requests, as in a push protocol) rather than multiple roundtrips. Choice of design depends on the goals: when designing a compiler, if fast compilation is the key priority, a one-pass compiler is faster than a multi-pass compiler (assuming same work), but if speed of output code is the goal, a slower multi-pass compiler fulfills the goal better, even though it takes longer itself. Choice of platform and programming language occur at this level, and changing them frequently requires a complete rewrite, though a modular system may allow rewrite of only some component – for example, for a Python program one may rewrite performance-critical sections in C. In a distributed system, choice of architecture (client-server, peer-to-peer, etc.) occurs at the design level, and may be difficult to change, particularly if all components cannot be replaced in sync (e.g., old clients).
Given an overall design, a good choice of efficient algorithms and data structures, and efficient implementation of these algorithms and data structures comes next. After design, the choice of algorithms and data structures affects efficiency more than any other aspect of the program. Generally data structures are more difficult to change than algorithms, as a data structure assumption and its performance assumptions are used throughout the program, though this can be minimized by the use of abstract data types in function definitions, and keeping the concrete data structure definitions restricted to a few places. Changes in data structures mapped to a database may require schema migration and other complex software or infrastructure changes.
For algorithms, this primarily consists of ensuring that algorithms are constant O(1), logarithmic O(log n), linear O(n), or in some cases log-linear O(n log n) in the input (both in space and time). Algorithms with quadratic complexity O(n2) fail to scale, and even linear algorithms cause problems if repeatedly called, and are typically replaced with constant or logarithmic if possible.