Community hub
Community hub
Recent from talks
Knowledge base stats:
Talk channels stats:
Members stats:
Remote job entry
Remote job entry, or Remote Batch, is the procedure for sending requests for non-interactive data processing tasks (jobs) to mainframe computers from remote workstations, and by extension the process of receiving the output from such jobs at a remote workstation.
The RJE workstation is called a remote because it usually is located some distance from the host computer. The workstation connects to the host through a modem, digital link, packet-switching network or local area network (LAN). RJE is similar to uux and SSH, except that the workstation sends a complete job stream rather than a single command and that the user typically does not receive any output until the completion of the job. The terms Remote Batch, Remote Job System[citation needed] and Remote Job Processing are also used for RJE facilities.
Remote Job Entry (RJE) is also the name of an OS/360 component that provided RJE services. An RJE workstation operator may have complete console control of the job flow between the workstation and mainframe, depending on local configuration and policy.
Houston Automatic Spooling Priority (HASP) initially supported job entry from terminals using Synchronous transmit-receive (STR); eventually HASP II supported only Binary Synchronous Communications (BSC), and added the Multi-leaving protocol for BSC programmable work stations; this protocol is incompatible with that used by OS/360 RJE and is the basis for protocols used for job submission from programmable work stations for, e.g., Attached Support Processor (ASP), JES2, JES3, OS/VS1 Remote Entry Services (RES), VM RSCS, as well as the later protocols for Network Job Entry (NJE) in, e.g., JES2, JES3, VM RSCS.
Conversational Remote Job Entry (CRJE) is a component of OS/360 and OS/VS1 that provides job submission, job retrieval and editing for a user at an interactive terminal.
Remote Entry Services] (RES) is a component of OS/VS1 that provides RJE services. An RES workstation operator may have complete console control of the job flow between the workstation and mainframe, depending on local configuration and policy.
Remote Spooling Communications Subsystem (RSCS) is, depending on the release, a component of or extra cost product in VM that provides RJE services. The RSCS in the free VM/370 only supported BSC; IBM added support for Systems Network Architecture (SNA), NJE and TCP/IP over several chargeable versions.
Network Job Entry (NJE) is Store and forward networking for transmitting, e.g., card files, jobs, printed output, among peers. The initial versions of NJE for JES2, JES3, VSE POWER and VM RSCS used BSC multileaving, but IBM quickly added support for Channel-to-channel adapters. IBM later added support for SNA and, ultimately, TCP/IP.
Hub AI
Remote job entry AI simulator
(@Remote job entry_simulator)
Remote job entry
Remote job entry, or Remote Batch, is the procedure for sending requests for non-interactive data processing tasks (jobs) to mainframe computers from remote workstations, and by extension the process of receiving the output from such jobs at a remote workstation.
The RJE workstation is called a remote because it usually is located some distance from the host computer. The workstation connects to the host through a modem, digital link, packet-switching network or local area network (LAN). RJE is similar to uux and SSH, except that the workstation sends a complete job stream rather than a single command and that the user typically does not receive any output until the completion of the job. The terms Remote Batch, Remote Job System[citation needed] and Remote Job Processing are also used for RJE facilities.
Remote Job Entry (RJE) is also the name of an OS/360 component that provided RJE services. An RJE workstation operator may have complete console control of the job flow between the workstation and mainframe, depending on local configuration and policy.
Houston Automatic Spooling Priority (HASP) initially supported job entry from terminals using Synchronous transmit-receive (STR); eventually HASP II supported only Binary Synchronous Communications (BSC), and added the Multi-leaving protocol for BSC programmable work stations; this protocol is incompatible with that used by OS/360 RJE and is the basis for protocols used for job submission from programmable work stations for, e.g., Attached Support Processor (ASP), JES2, JES3, OS/VS1 Remote Entry Services (RES), VM RSCS, as well as the later protocols for Network Job Entry (NJE) in, e.g., JES2, JES3, VM RSCS.
Conversational Remote Job Entry (CRJE) is a component of OS/360 and OS/VS1 that provides job submission, job retrieval and editing for a user at an interactive terminal.
Remote Entry Services] (RES) is a component of OS/VS1 that provides RJE services. An RES workstation operator may have complete console control of the job flow between the workstation and mainframe, depending on local configuration and policy.
Remote Spooling Communications Subsystem (RSCS) is, depending on the release, a component of or extra cost product in VM that provides RJE services. The RSCS in the free VM/370 only supported BSC; IBM added support for Systems Network Architecture (SNA), NJE and TCP/IP over several chargeable versions.
Network Job Entry (NJE) is Store and forward networking for transmitting, e.g., card files, jobs, printed output, among peers. The initial versions of NJE for JES2, JES3, VSE POWER and VM RSCS used BSC multileaving, but IBM quickly added support for Channel-to-channel adapters. IBM later added support for SNA and, ultimately, TCP/IP.