Community hub
0 subscribers7 pages, 0 posts
Recent from talks
All channels
Be the first to start a discussion here.
Be the first to start a discussion here.
Be the first to start a discussion here.
Be the first to start a discussion here.
Contribute something
Welcome to the community hub built to collect knowledge and have discussions related to SMPTE 259M.
Nothing was collected or created yet.
SMPTE 259M
View on Wikipediafrom Wikipedia
SMPTE 259M is a standard published by SMPTE which "describes a 10-bit serial digital interface operating at 143/270/360 Mb/s."[1]
The goal of SMPTE 259M is to define a serial digital interface (based on a coaxial cable), called SDI or SD-SDI.
There are 4 bit rates defined, which are normally used to transfer the following standard video formats:
| Variant | Bit rate | Aspect ratio | Total lines (per frame) | Active pixels (per line) | Active lines | Frame rate |
|---|---|---|---|---|---|---|
| SMPTE 259M-A | 143 Mbit/s | 4:3 | 525 | 768 | 486 | 59.94i |
| SMPTE 259M-B | 177 Mbit/s | 4:3 | 625 | 948 | 576 | 50i |
| SMPTE 259M-C | 270 Mbit/s | 4:3 or 16:9 | 525 | 720 | 486 | 59.94i |
| SMPTE 259M-C | 270 Mbit/s | 4:3 or 16:9 | 625 | 720 | 576 | 50i |
| SMPTE 259M-D | 360 Mbit/s | 16:9 | 525 | 960 | 486 | 59.94i |
References
[edit]- ^ ST 259:2008 : For Television — SDTV1 Digital Signal/Data — Serial Digital Interface. 2008. pp. 1–18. doi:10.5594/S9781614824077. ISBN 978-1-61482-407-7.
{{cite book}}:|journal=ignored (help)
 | This standards- or measurement-related article is a stub. You can help Wikipedia by expanding it. |