Community hub
Recent from talks
Contribute something to knowledge base
Content stats: 0 posts, 0 articles, 0 media, 0 notes
Members stats: 0 subscribers, 0 contributors, 0 moderators, 0 supporters
Subscribers
Supporters
Contributors
Moderators
Hub AI
Saepta Julia AI simulator
(@Saepta Julia_simulator)
Hub AI
Saepta Julia AI simulator
(@Saepta Julia_simulator)
Saepta Julia
The Saepta Julia was a building in the Campus Martius of Rome, where citizens gathered to cast votes. The building was conceived by Julius Caesar and dedicated by Marcus Vipsanius Agrippa in 26 BC. The building replaced an older structure, called the Ovile, built as a place for the comitia tributa to gather to cast votes. The Saepta Julia can be seen on the Forma Urbis Romae, a map of the city of Rome as it existed in the early 3rd century AD. Part of the original wall of the Saepta Julia can still be seen right next to the Pantheon.
The conception of the Saepta Julia, which also goes by Saepta or Porticus Saeptorum, began during the reign of Julius Caesar. It took the form of a quadriporticus, an architectural feature made popular by Caesar.
After Caesar's assassination in 44 BC, work continued on projects that Caesar had set into motion. Marcus Aemilius Lepidus, who had supported Caesar before his death, and subsequently aligned with his successor Octavian, took on the continuation of the Saepta Julia building project. The building was finally completed and dedicated by Marcus Vipsanius Agrippa in 26 BC. Agrippa also decorated the building with marble tablets and Greek paintings.
The Great Fire of Rome led to its destruction in AD 80. It was rebuilt sometime before the reign of Domitian. Restoration also took place under Hadrian, as is evidenced by brick-work and literary sources. The building is also attested on a post-Constantine bronze collar of a slave, but there is no known mention of the building in the Middle Ages.
The Saepta Julia can be seen on the Forma Urbis Romae, a map of the city of Rome as it existed in the early 3rd century AD. Part of the original wall of the Saepta Julia can still be seen right next to the Pantheon
Due to the limited archaeological remains, the majority of archaeological reconstructions are derived from the Forma Urbis Romae and corresponding literary sources. Located on the Campus Martius, between the Baths of Agrippa and the Serapeum, the Saepta Julia was a rectangular porticus complex, which extended along the west side of the Via Lata to the Via di S. Marco. It was 310 meters long by 120 meters wide and was built of travertine marble. Two porticoes lay on the east and west of the complex. The north end was a lobby, and the south side connected to the Diribitorium through an uncolonnaded, broad corridor. The only entrances that have been discerned are minor entrances on the south end of the complex.
Archaeological excavations underneath the Palazzo Doria uncovered multiple travertine piers. While the majority of the piers measured 1.7 meters square, other piers showed a variety of dimensions. This has led some scholars to speculate on the existence of a second floor.
The Saepta was supplied with water by Aqua Virgo, which supplied the majority of buildings on the Campus Martius.
Saepta Julia
The Saepta Julia was a building in the Campus Martius of Rome, where citizens gathered to cast votes. The building was conceived by Julius Caesar and dedicated by Marcus Vipsanius Agrippa in 26 BC. The building replaced an older structure, called the Ovile, built as a place for the comitia tributa to gather to cast votes. The Saepta Julia can be seen on the Forma Urbis Romae, a map of the city of Rome as it existed in the early 3rd century AD. Part of the original wall of the Saepta Julia can still be seen right next to the Pantheon.
The conception of the Saepta Julia, which also goes by Saepta or Porticus Saeptorum, began during the reign of Julius Caesar. It took the form of a quadriporticus, an architectural feature made popular by Caesar.
After Caesar's assassination in 44 BC, work continued on projects that Caesar had set into motion. Marcus Aemilius Lepidus, who had supported Caesar before his death, and subsequently aligned with his successor Octavian, took on the continuation of the Saepta Julia building project. The building was finally completed and dedicated by Marcus Vipsanius Agrippa in 26 BC. Agrippa also decorated the building with marble tablets and Greek paintings.
The Great Fire of Rome led to its destruction in AD 80. It was rebuilt sometime before the reign of Domitian. Restoration also took place under Hadrian, as is evidenced by brick-work and literary sources. The building is also attested on a post-Constantine bronze collar of a slave, but there is no known mention of the building in the Middle Ages.
The Saepta Julia can be seen on the Forma Urbis Romae, a map of the city of Rome as it existed in the early 3rd century AD. Part of the original wall of the Saepta Julia can still be seen right next to the Pantheon
Due to the limited archaeological remains, the majority of archaeological reconstructions are derived from the Forma Urbis Romae and corresponding literary sources. Located on the Campus Martius, between the Baths of Agrippa and the Serapeum, the Saepta Julia was a rectangular porticus complex, which extended along the west side of the Via Lata to the Via di S. Marco. It was 310 meters long by 120 meters wide and was built of travertine marble. Two porticoes lay on the east and west of the complex. The north end was a lobby, and the south side connected to the Diribitorium through an uncolonnaded, broad corridor. The only entrances that have been discerned are minor entrances on the south end of the complex.
Archaeological excavations underneath the Palazzo Doria uncovered multiple travertine piers. While the majority of the piers measured 1.7 meters square, other piers showed a variety of dimensions. This has led some scholars to speculate on the existence of a second floor.
The Saepta was supplied with water by Aqua Virgo, which supplied the majority of buildings on the Campus Martius.