Community hub
Recent from talks
Knowledge base stats:
Talk channels stats:
Members stats:
Loom
A loom is a device used to weave cloth and tapestry. The basic purpose of any loom is to hold the warp threads under tension to facilitate the interweaving of the weft threads. The precise shape of the loom and its mechanics may vary, but the basic function is the same.
The word "loom" derives from the Old English geloma, formed from ge- (perfective prefix) and loma, a root of unknown origin; the whole word geloma meant a utensil, tool, or machine of any kind. In 1404 "lome" was used to mean a machine to enable weaving thread into cloth.[failed verification] By 1838 "loom" had gained the additional meaning of a machine for interlacing thread.[citation needed]
Weaving is done on two sets of threads or yarns, which cross one another. The warp threads are the ones stretched on the loom (from the Proto-Indo-European *werp, "to bend"). Each thread of the weft (i.e. "that which is woven") is inserted so that it passes over and under the warp threads.
The ends of the warp threads are usually fastened to beams. One end is fastened to one beam, the other end to a second beam, so that the warp threads all lie parallel and are all the same length. The beams are held apart to keep the warp threads taut.
The textile is woven starting at one end of the warp threads, and progressing towards the other end. The beam on the finished-fabric end is called the cloth beam. The other beam is called the warp beam.
Beams may be used as rollers to allow the weaver to weave a piece of cloth longer than the loom. As the cloth is woven, the warp threads are gradually unrolled from the warp beam, and the woven portion of the cloth is rolled up onto the cloth beam (which is also called the takeup roll). The portion of the fabric that has already been formed but not yet rolled up on the takeup roll is called the fell.
Not all looms have two beams. For instance, warp-weighted looms have only one beam; the warp yarns hang from this beam. The bottom ends of the warp yarns are tied to dangling loom weights.
A loom has to perform three principal motions: shedding, picking, and battening.
Hub AI
Loom AI simulator
(@Loom_simulator)
Loom
A loom is a device used to weave cloth and tapestry. The basic purpose of any loom is to hold the warp threads under tension to facilitate the interweaving of the weft threads. The precise shape of the loom and its mechanics may vary, but the basic function is the same.
The word "loom" derives from the Old English geloma, formed from ge- (perfective prefix) and loma, a root of unknown origin; the whole word geloma meant a utensil, tool, or machine of any kind. In 1404 "lome" was used to mean a machine to enable weaving thread into cloth.[failed verification] By 1838 "loom" had gained the additional meaning of a machine for interlacing thread.[citation needed]
Weaving is done on two sets of threads or yarns, which cross one another. The warp threads are the ones stretched on the loom (from the Proto-Indo-European *werp, "to bend"). Each thread of the weft (i.e. "that which is woven") is inserted so that it passes over and under the warp threads.
The ends of the warp threads are usually fastened to beams. One end is fastened to one beam, the other end to a second beam, so that the warp threads all lie parallel and are all the same length. The beams are held apart to keep the warp threads taut.
The textile is woven starting at one end of the warp threads, and progressing towards the other end. The beam on the finished-fabric end is called the cloth beam. The other beam is called the warp beam.
Beams may be used as rollers to allow the weaver to weave a piece of cloth longer than the loom. As the cloth is woven, the warp threads are gradually unrolled from the warp beam, and the woven portion of the cloth is rolled up onto the cloth beam (which is also called the takeup roll). The portion of the fabric that has already been formed but not yet rolled up on the takeup roll is called the fell.
Not all looms have two beams. For instance, warp-weighted looms have only one beam; the warp yarns hang from this beam. The bottom ends of the warp yarns are tied to dangling loom weights.
A loom has to perform three principal motions: shedding, picking, and battening.