Airbag

An airbag or supplemental inflatable restraint is a vehicle occupant-restraint system using a bag designed to inflate in milliseconds during a collision and then deflate afterwards. It consists of an airbag cushion, a flexible fabric bag, an inflation module, and an impact sensor. The purpose of the airbag is to provide a vehicle occupant with soft cushioning and restraint during a collision. It can reduce injuries between the flailing occupant and the vehicle's interior.

The airbag provides an energy-absorbing surface between the vehicle's occupants and a steering wheel, instrument panel, body pillar, headliner, and windshield. Modern vehicles may contain up to ten airbag modules in various configurations, including driver, passenger, side-curtain, seat-mounted, door-mounted, B- and C-pillar mounted side-impact, knee bolster, inflatable seat belt, and pedestrian airbag modules.

During a crash, the vehicle's crash sensors provide crucial information to the airbag electronic controller unit (ECU), including collision type, angle, and severity of impact. Using this information, the airbag ECU's crash algorithm determines if the crash event meets the criteria for deployment and triggers various firing circuits to deploy one or more airbag modules within the vehicle. Airbag module deployments are activated through a pyrotechnic process designed to be used once as a supplemental restraint system for the vehicle's seat belt systems. Newer side-impact airbag modules consist of compressed-air cylinders that are triggered in the event of a side-on vehicle impact.

The first commercial designs were introduced in passenger automobiles during the 1970s. These designs saw limited success and caused some fatalities. Broad commercial adoption of airbags occurred in many markets during the late 1980s and early 1990s.

Airbags are considered "passive" restraints and act as a supplement to "active" restraints. Because no action by a vehicle occupant is required to activate or use the airbag, it is considered a "passive" device. This is in contrast to seat belts, which are considered "active" devices because the vehicle occupant must act to enable them.

This terminology is not related to active and passive safety, which are, respectively, systems designed to prevent collisions in the first place, and systems designed to minimize the effects of collisions once they occur. In this use, a car Anti-lock braking system qualifies as an active-safety device, while both its seat belts and airbags qualify as passive-safety devices. Terminological confusion can arise from the fact that passive devices and systems—those requiring no input or action by the vehicle occupant—can operate independently in an active manner; an airbag is one such device. Vehicle safety professionals are generally careful in their use of language to avoid this sort of confusion. However, advertising principles sometimes prevent such semantic caution in the consumer marketing of safety features. Further confusing the terminology, the aviation safety community uses the terms "active" and "passive" in the opposite sense from the automotive industry.

The airbag "for the covering of aeroplane and other vehicle parts" traces its origins to a United States patent, submitted in 1919 by two dentists from Birmingham, Arthur Parrott and Harold Round. The patent was approved in 1920. Air-filled bladders were in use as early as 1951. The airbag specifically for automobile use is credited independently to the American John W. Hetrick, who filed for an airbag patent on 5 August 1952, that was granted #2,649,311 by the United States Patent Office on 18 August 1953. German patent #896,312 filed for by engineer Walter Linderer on 6 October 1951 was issued on 12 November 1953, approximately three months after American John Hetrick. The airbags proposed by Hetrick and Linderer were based on compressed air released by a spring, bumper contact, or by the driver. Later research during the 1960s showed that compressed air could not inflate the mechanical airbags fast enough to ensure maximum safety, leading to the current chemical and electrical airbags. In patent applications, manufacturers sometimes use the term "inflatable occupant restraint systems".

Hetrick was an industrial engineer and member of the United States Navy. His airbag design, however, only came about when he combined his experiences working with navy torpedoes with his desire to protect his family on the road. Despite working with the major automobile manufacturers of his time, Hetrick was unable to attract investment. Although airbags are now required in every automobile sold in the United States, Hetrick's 1951 patent filing serves as an example of a "valuable" invention with little economic value to its inventor. Its first commercial use was not implemented until after the patent expired in 1971, at which point the airbag was installed in a few experimental Ford cars.