Community hub
Recent from talks
Knowledge base stats:
Talk channels stats:
Members stats:
Temsah 1
The Temsah 1 is an Egyptian mine-resistant and ambush-resistant MRAP armored personnel carrier, designed primarily for convoy protection, border patrol, counter-insurgency, troop transport, medical evacuation and command and control. Unveiled in 2016, it was designed and developed by Kader Factory for Developed Industries, and was displayed during the EDEX 2018 exhibition.
It is the advanced, light version of the Temsah, the first version of which appeared for the first time in May 2015 during the President of the Republic's inauguration of development work for the Armed Forces’ vehicle management workshops.
The armored hull is fully welded V-shaped steel armor providing complete protection against 7.62 mm shell attack. Comes equipped with a heavy duty air conditioner. The driver sits in front to the left and the commander sits to the right. Both sit behind large bulletproof windows, and a side door opens to the front, featuring a bulletproof window at the top. And a double back door. The troop compartment is located at the rear of the hull, where the rear door opens horizontally. In the upper part of the troop compartment there is a roof hatch equipped with a combat turret. Pedestrians sit on explosion-proof seats that can be folded on the sides. On either side of the troop room are three firing pins so that the troops can use their weapons from inside, and the back door has two locks. The vehicle can be equipped with optional systems such as military paint, an additional frame with a stand, a machine gun mount depending on the type, and a shock-absorbing floor. Three-day and one-night cameras are installed for all-round surveillance, and images are displayed on a 9-inch monitor installed in the crew compartment.
It is armed with a 40 mm automatic grenade launcher and a 7.62×51mm automatic rifle or 12.7×99mm.
The vehicle has a high level of protection, mine protection level Stange-4 with the possibility of adding Anti-Blast Seats and an Advanced Impact Mat/Shock-Absorbing Floor, ballistic protection level BR7, glass protection level BR7, tower protection level BR7 anti-armour-piercing bullets of 7.62×51mm. There are 8 side and back sliders to fire from inside the vehicle.
The speed of the Temsah 1 armored vehicle reaches 80 km/h and a range of up to 600 km. The engine is a 4-stroke water-cooled diesel with 6 cylinders, capable of providing 230 hp every 2100 rpm, maximum climb angle 38°, maximum side tilt angle ° 20, approach angle 38°, departure angle 37°.
It appeared for the first time in May 2015 during the President's inauguration of development work for the Armed Forces’ vehicle management workshops. It actually participated in counter-terrorism operations in Sinai, where it appeared in a video produced by the Armed Forces Morale Affairs. It was equipped with Cage Armor to protect against RPG shells, and a version of it appeared for electronic and radio jamming applications.
It was a 4×4 lightweight armored personnel carrier. The hull was made of solid, welded armour, and had a distinctive V-shaped unilateral hull design. Its payload was 4-6 people. It had an armor level of B6 and could withstand bullets up to 7.62×51mm in addition to hand grenades. And a limited ability to withstand explosive devices.
Hub AI
Temsah 1 AI simulator
(@Temsah 1_simulator)
Temsah 1
The Temsah 1 is an Egyptian mine-resistant and ambush-resistant MRAP armored personnel carrier, designed primarily for convoy protection, border patrol, counter-insurgency, troop transport, medical evacuation and command and control. Unveiled in 2016, it was designed and developed by Kader Factory for Developed Industries, and was displayed during the EDEX 2018 exhibition.
It is the advanced, light version of the Temsah, the first version of which appeared for the first time in May 2015 during the President of the Republic's inauguration of development work for the Armed Forces’ vehicle management workshops.
The armored hull is fully welded V-shaped steel armor providing complete protection against 7.62 mm shell attack. Comes equipped with a heavy duty air conditioner. The driver sits in front to the left and the commander sits to the right. Both sit behind large bulletproof windows, and a side door opens to the front, featuring a bulletproof window at the top. And a double back door. The troop compartment is located at the rear of the hull, where the rear door opens horizontally. In the upper part of the troop compartment there is a roof hatch equipped with a combat turret. Pedestrians sit on explosion-proof seats that can be folded on the sides. On either side of the troop room are three firing pins so that the troops can use their weapons from inside, and the back door has two locks. The vehicle can be equipped with optional systems such as military paint, an additional frame with a stand, a machine gun mount depending on the type, and a shock-absorbing floor. Three-day and one-night cameras are installed for all-round surveillance, and images are displayed on a 9-inch monitor installed in the crew compartment.
It is armed with a 40 mm automatic grenade launcher and a 7.62×51mm automatic rifle or 12.7×99mm.
The vehicle has a high level of protection, mine protection level Stange-4 with the possibility of adding Anti-Blast Seats and an Advanced Impact Mat/Shock-Absorbing Floor, ballistic protection level BR7, glass protection level BR7, tower protection level BR7 anti-armour-piercing bullets of 7.62×51mm. There are 8 side and back sliders to fire from inside the vehicle.
The speed of the Temsah 1 armored vehicle reaches 80 km/h and a range of up to 600 km. The engine is a 4-stroke water-cooled diesel with 6 cylinders, capable of providing 230 hp every 2100 rpm, maximum climb angle 38°, maximum side tilt angle ° 20, approach angle 38°, departure angle 37°.
It appeared for the first time in May 2015 during the President's inauguration of development work for the Armed Forces’ vehicle management workshops. It actually participated in counter-terrorism operations in Sinai, where it appeared in a video produced by the Armed Forces Morale Affairs. It was equipped with Cage Armor to protect against RPG shells, and a version of it appeared for electronic and radio jamming applications.
It was a 4×4 lightweight armored personnel carrier. The hull was made of solid, welded armour, and had a distinctive V-shaped unilateral hull design. Its payload was 4-6 people. It had an armor level of B6 and could withstand bullets up to 7.62×51mm in addition to hand grenades. And a limited ability to withstand explosive devices.