Community hub
Recent from talks
Knowledge base stats:
Talk channels stats:
Members stats:
U.S. Route 96
U.S. Highway 96 (US 96) is a north–south United States Numbered Highway that runs for about 117.11 miles (188.47 km) entirely in the U.S state of Texas. Its number is a violation of the standard numbering convention, as even-numbered two-digit highways are east–west routes by rule. As of 2004, the highway's southern terminus (as well as those of US 287 and US 69) is in Port Arthur at an intersection with State Highway 87 (SH 87). Its northern terminus is in Tenaha at an intersection with US 59 (Future I-69)/(Future I-369) and US 84 (Future I-69).
US 96 begins at SH 87 in Port Arthur, at a southern terminus it also shares with US 69 and US 287. The three highways head in a northwest direction toward Beaumont. In Beaumont, the three highways briefly merge with Interstate 10 (I-10), but then split from that freeway continuing northwest. In Lumberton, US 96 separates from US 287 and US 69, and heads northeast towards Silsbee. In Silsbee, US 96 splits with US 96F, a special route of US 96 that serves downtown Silsbee, while being routed on a bypass freeway. After Silsbee, US 96 heads northeast to Buna, then north to Kirbyville and Jasper. After Jasper. US 96 comes near the Sam Rayburn Reservoir near Pineland. US 96 eventually comes to its northern terminus near Tenaha at a junction with US 59 (Future I-69)/(Future I-369) and US 84 (Future I-69).
When commissioned in 1927, US 96 was routed from Rosenberg via Wharton, Victoria, Beeville, Skidmore, Alice, Falfurrias, and San Juan to Brownsville.
In 1933, the present route of US 96 was originally proposed to be part of US 71. Under this plan, discussed at a meeting of the United States Good Roads Association in Beaumont, US 71 was to be diverted out of Louisiana altogether and instead re-routed from the Texarkana area southward through East Texas.
In 1935, US 96 was rerouted to Laredo instead of Brownsville. 03/01/1935 - Beginning at Rosenburg, Wharton, Victoria, Beeville, Skidmore, Mathis, Alice, Laredo. This is the current route of US 59.
In the 1935, US 59 was initially routed from Teneha to Port Arthur following the basic route of the current US 96. US 96 began in Rosenburg (Near Houston) and roughly followed the current route of US 59 to Alice then on to Brownsville and later was rerouted to Laredo.
Minute Order 016701, dated 09/26/1939 radically re-aligned US 96 to travel a route formerly used by US 59: From Tenaha via Center, San Augustine, Jasper, Buna, Voth, and Beaumont to Port Arthur (Shelby, San Augustine, Sabine, Jasper, Hardin, and Jefferson Counties). This renumbered US 59 and 96 beginning in Teneha to roughly their current paths. SH 35 from Teneha to Houston had become US 59. The entirety of the pre-1939 US 96 had been changed to US 59 and US 59 South of Teneha had been renumbered to US 96.
As part of the I-14 System in Texas project, US 96 between Jasper and Beaumont is proposed to be upgraded to interstate standards. The interstate segment would begin at either US 190/SH 63 (Future I-14) and head southward before terminating at I-10.
Hub AI
U.S. Route 96 AI simulator
(@U.S. Route 96_simulator)
U.S. Route 96
U.S. Highway 96 (US 96) is a north–south United States Numbered Highway that runs for about 117.11 miles (188.47 km) entirely in the U.S state of Texas. Its number is a violation of the standard numbering convention, as even-numbered two-digit highways are east–west routes by rule. As of 2004, the highway's southern terminus (as well as those of US 287 and US 69) is in Port Arthur at an intersection with State Highway 87 (SH 87). Its northern terminus is in Tenaha at an intersection with US 59 (Future I-69)/(Future I-369) and US 84 (Future I-69).
US 96 begins at SH 87 in Port Arthur, at a southern terminus it also shares with US 69 and US 287. The three highways head in a northwest direction toward Beaumont. In Beaumont, the three highways briefly merge with Interstate 10 (I-10), but then split from that freeway continuing northwest. In Lumberton, US 96 separates from US 287 and US 69, and heads northeast towards Silsbee. In Silsbee, US 96 splits with US 96F, a special route of US 96 that serves downtown Silsbee, while being routed on a bypass freeway. After Silsbee, US 96 heads northeast to Buna, then north to Kirbyville and Jasper. After Jasper. US 96 comes near the Sam Rayburn Reservoir near Pineland. US 96 eventually comes to its northern terminus near Tenaha at a junction with US 59 (Future I-69)/(Future I-369) and US 84 (Future I-69).
When commissioned in 1927, US 96 was routed from Rosenberg via Wharton, Victoria, Beeville, Skidmore, Alice, Falfurrias, and San Juan to Brownsville.
In 1933, the present route of US 96 was originally proposed to be part of US 71. Under this plan, discussed at a meeting of the United States Good Roads Association in Beaumont, US 71 was to be diverted out of Louisiana altogether and instead re-routed from the Texarkana area southward through East Texas.
In 1935, US 96 was rerouted to Laredo instead of Brownsville. 03/01/1935 - Beginning at Rosenburg, Wharton, Victoria, Beeville, Skidmore, Mathis, Alice, Laredo. This is the current route of US 59.
In the 1935, US 59 was initially routed from Teneha to Port Arthur following the basic route of the current US 96. US 96 began in Rosenburg (Near Houston) and roughly followed the current route of US 59 to Alice then on to Brownsville and later was rerouted to Laredo.
Minute Order 016701, dated 09/26/1939 radically re-aligned US 96 to travel a route formerly used by US 59: From Tenaha via Center, San Augustine, Jasper, Buna, Voth, and Beaumont to Port Arthur (Shelby, San Augustine, Sabine, Jasper, Hardin, and Jefferson Counties). This renumbered US 59 and 96 beginning in Teneha to roughly their current paths. SH 35 from Teneha to Houston had become US 59. The entirety of the pre-1939 US 96 had been changed to US 59 and US 59 South of Teneha had been renumbered to US 96.
As part of the I-14 System in Texas project, US 96 between Jasper and Beaumont is proposed to be upgraded to interstate standards. The interstate segment would begin at either US 190/SH 63 (Future I-14) and head southward before terminating at I-10.