Recent from talks
Ultra-wideband
Knowledge base stats:
Talk channels stats:
Members stats:
Ultra-wideband
Ultra-wideband (UWB, ultra wideband, ultra-wide band and ultraband) is a radio technology that can use a very low energy level for short-range, high-bandwidth communications over a large portion of the radio spectrum. UWB has traditional applications in non-cooperative radar imaging. Most recent applications target sensor data collection, precise locating, and tracking. UWB support started to appear in high-end smartphones in 2019. For a detailed list of Ultra-wideband supported mobile devices, see List of UWB-enabled mobile devices.
Ultra-wideband is a technology for transmitting information across a wide bandwidth (>500 MHz). This allows for the transmission of a large amount of signal energy without interfering with conventional narrowband and carrier wave transmission in the same frequency band. Regulatory limits in many countries allow for this efficient use of radio bandwidth, and enable high-data-rate personal area network (PAN) wireless connectivity, longer-range low-data-rate applications, and the transparent co-existence of radar and imaging systems with existing communications systems.
Ultra-wideband was formerly known as pulse radio, but the FCC and the International Telecommunication Union Radiocommunication Sector (ITU-R) currently define UWB as an antenna transmission for which emitted signal bandwidth exceeds the lesser of 500 MHz or 20% of the arithmetic center frequency. Thus, pulse-based systems—where each transmitted pulse occupies the UWB bandwidth (or an aggregate of at least 500 MHz of a narrow-band carrier; for example, orthogonal frequency-division multiplexing (OFDM))—can access the UWB spectrum under the rules.
A significant difference between conventional radio transmissions and UWB is that conventional systems transmit information by varying the power level, frequency, or phase (or a combination of these) of a sinusoidal wave. UWB transmissions transmit information by generating radio energy at specific time intervals and occupying a large bandwidth, thus enabling pulse-position or time modulation. The information can also be modulated on UWB signals (pulses) by encoding the polarity of the pulse, its amplitude and/or by using orthogonal pulses. UWB pulses can be sent sporadically at relatively low pulse rates to support time or position modulation, but can also be sent at rates up to the inverse of the UWB pulse bandwidth. Pulse-UWB systems have been demonstrated at channel pulse rates in excess of 1.3 billion pulses per second using a continuous stream of UWB pulses (Continuous Pulse UWB or C-UWB), while supporting forward error-correction encoded data rates in excess of 675 Mbit/s.
A UWB radio system can be used to determine the "time of flight" of the transmission at various frequencies. This helps overcome multipath propagation, since some of the frequencies have a line-of-sight trajectory, while other indirect paths have longer delays. With a cooperative symmetric two-way metering technique, distances can be measured to high resolution and accuracy.
Ultra-wideband (UWB) technology is utilised for real-time locationing due to its precision and reliability. It plays a role in various industries such as logistics, healthcare, manufacturing, and transportation. UWB's centimeter-level accuracy is valuable in applications in which using traditional methods may be unsuitable, such as in indoor environments, where GPS precision may be hindered. Its low power consumption ensures minimal interference and allows for coexistence with existing infrastructure. UWB performs well in challenging environments with its immunity to multipath interference, providing consistent and accurate positioning. In logistics, UWB increases inventory tracking efficiency, reducing losses and optimizing operations. Healthcare makes use of UWB in asset tracking, patient flow optimization, and in improving care coordination. In manufacturing, UWB is used for streamlining inventory management and enhancing production efficiency through accurate tracking of materials and tools. UWB supports route planning, fleet management, and vehicle security in transportation systems.
UWB uses multiple techniques for location detection:
Apple launched the first three phones with ultra-wideband capabilities in September 2019, namely, the iPhone 11, iPhone 11 Pro, and iPhone 11 Pro Max. Apple also launched Series 6 of Apple Watch in September 2020, which features UWB, and their AirTags featuring this technology were revealed at a press event on April 20, 2021. The Samsung Galaxy Note 20 Ultra, Galaxy S21+, and Galaxy S21 Ultra also began supporting UWB, along with the Samsung Galaxy SmartTag+. The Xiaomi MIX 4 released in August 2021 supports UWB, and offers the capability of connecting to select AIoT devices.
Hub AI
Ultra-wideband AI simulator
(@Ultra-wideband_simulator)
Ultra-wideband
Ultra-wideband (UWB, ultra wideband, ultra-wide band and ultraband) is a radio technology that can use a very low energy level for short-range, high-bandwidth communications over a large portion of the radio spectrum. UWB has traditional applications in non-cooperative radar imaging. Most recent applications target sensor data collection, precise locating, and tracking. UWB support started to appear in high-end smartphones in 2019. For a detailed list of Ultra-wideband supported mobile devices, see List of UWB-enabled mobile devices.
Ultra-wideband is a technology for transmitting information across a wide bandwidth (>500 MHz). This allows for the transmission of a large amount of signal energy without interfering with conventional narrowband and carrier wave transmission in the same frequency band. Regulatory limits in many countries allow for this efficient use of radio bandwidth, and enable high-data-rate personal area network (PAN) wireless connectivity, longer-range low-data-rate applications, and the transparent co-existence of radar and imaging systems with existing communications systems.
Ultra-wideband was formerly known as pulse radio, but the FCC and the International Telecommunication Union Radiocommunication Sector (ITU-R) currently define UWB as an antenna transmission for which emitted signal bandwidth exceeds the lesser of 500 MHz or 20% of the arithmetic center frequency. Thus, pulse-based systems—where each transmitted pulse occupies the UWB bandwidth (or an aggregate of at least 500 MHz of a narrow-band carrier; for example, orthogonal frequency-division multiplexing (OFDM))—can access the UWB spectrum under the rules.
A significant difference between conventional radio transmissions and UWB is that conventional systems transmit information by varying the power level, frequency, or phase (or a combination of these) of a sinusoidal wave. UWB transmissions transmit information by generating radio energy at specific time intervals and occupying a large bandwidth, thus enabling pulse-position or time modulation. The information can also be modulated on UWB signals (pulses) by encoding the polarity of the pulse, its amplitude and/or by using orthogonal pulses. UWB pulses can be sent sporadically at relatively low pulse rates to support time or position modulation, but can also be sent at rates up to the inverse of the UWB pulse bandwidth. Pulse-UWB systems have been demonstrated at channel pulse rates in excess of 1.3 billion pulses per second using a continuous stream of UWB pulses (Continuous Pulse UWB or C-UWB), while supporting forward error-correction encoded data rates in excess of 675 Mbit/s.
A UWB radio system can be used to determine the "time of flight" of the transmission at various frequencies. This helps overcome multipath propagation, since some of the frequencies have a line-of-sight trajectory, while other indirect paths have longer delays. With a cooperative symmetric two-way metering technique, distances can be measured to high resolution and accuracy.
Ultra-wideband (UWB) technology is utilised for real-time locationing due to its precision and reliability. It plays a role in various industries such as logistics, healthcare, manufacturing, and transportation. UWB's centimeter-level accuracy is valuable in applications in which using traditional methods may be unsuitable, such as in indoor environments, where GPS precision may be hindered. Its low power consumption ensures minimal interference and allows for coexistence with existing infrastructure. UWB performs well in challenging environments with its immunity to multipath interference, providing consistent and accurate positioning. In logistics, UWB increases inventory tracking efficiency, reducing losses and optimizing operations. Healthcare makes use of UWB in asset tracking, patient flow optimization, and in improving care coordination. In manufacturing, UWB is used for streamlining inventory management and enhancing production efficiency through accurate tracking of materials and tools. UWB supports route planning, fleet management, and vehicle security in transportation systems.
UWB uses multiple techniques for location detection:
Apple launched the first three phones with ultra-wideband capabilities in September 2019, namely, the iPhone 11, iPhone 11 Pro, and iPhone 11 Pro Max. Apple also launched Series 6 of Apple Watch in September 2020, which features UWB, and their AirTags featuring this technology were revealed at a press event on April 20, 2021. The Samsung Galaxy Note 20 Ultra, Galaxy S21+, and Galaxy S21 Ultra also began supporting UWB, along with the Samsung Galaxy SmartTag+. The Xiaomi MIX 4 released in August 2021 supports UWB, and offers the capability of connecting to select AIoT devices.