Community hub
Recent from talks
Contribute something to knowledge base
Content stats: 0 posts, 0 articles, 0 media, 0 notes
Members stats: 0 subscribers, 0 contributors, 0 moderators, 0 supporters
Subscribers
Supporters
Contributors
Moderators
Hub AI
Wood fibre AI simulator
(@Wood fibre_simulator)
Hub AI
Wood fibre AI simulator
(@Wood fibre_simulator)
Wood fibre
Wood fibres (also spelled wood fibers, see spelling differences) are usually cellulosic elements that are extracted from trees and used to make materials including paper.
The end paper product (paper, paperboard, tissue, cardboard, etc.) dictates the species, or species blend, that is best suited to provide the desirable sheet characteristics, and also dictates the required fibre processing (chemical treatment, heat treatment, mechanical "brushing" or refining, etc.).
In North America, virgin (non-recycled) wood fibre is primarily extracted from hardwood (deciduous) trees and softwood (coniferous) trees. The wood fibre can be extracted as a primary product, or collected during the milling of lumber. Wood fibres can also be recycled from used paper materials.
Wood fibres are treated by combining them with other additives which break down the fibres into a spongy mass called pulp. The pulp is then processed, and the network of tiny fibres is pressed flat, becoming paper.
Wood fibres can be pressed into various types of flat boards, used as insulation, renderboard and sarking. Densities vary from 60Kg/m3 insulation boards to 180Kg/m3 render boards. Some types of woodfibre are flexible, others very rigid. Flexible insulation is designed to be friction-installed between timbers or fitted on top of somewhat irregular surfaces
There are manufacturers in Poland (Beltermo, Steico), Germany (Gutex, Steico HQ), France (Pavatex) and Norway (Hunton)..
There are two different manufacturing processes: wet and dry.
In the wet-process, chipped, waste timber is ground up into small pieces then boiled up with water and a few other chemicals designed to break down the timber into the fibres. During this process, many of the sugars which are of interest to fungus and mould are removed. This slurry is then poured on to a belt sieve and compressed to remove as much water as possible and heated with steam to bond the fibres together. The steaming process softens the natural lignin around the fibres which holds the fibres together in the board, which is typically manufactured to around 20mm thickness. These boards are then laminated up with a water based glue into thicker layers to produce boards up to around 120mm thick.
Wood fibre
Wood fibres (also spelled wood fibers, see spelling differences) are usually cellulosic elements that are extracted from trees and used to make materials including paper.
The end paper product (paper, paperboard, tissue, cardboard, etc.) dictates the species, or species blend, that is best suited to provide the desirable sheet characteristics, and also dictates the required fibre processing (chemical treatment, heat treatment, mechanical "brushing" or refining, etc.).
In North America, virgin (non-recycled) wood fibre is primarily extracted from hardwood (deciduous) trees and softwood (coniferous) trees. The wood fibre can be extracted as a primary product, or collected during the milling of lumber. Wood fibres can also be recycled from used paper materials.
Wood fibres are treated by combining them with other additives which break down the fibres into a spongy mass called pulp. The pulp is then processed, and the network of tiny fibres is pressed flat, becoming paper.
Wood fibres can be pressed into various types of flat boards, used as insulation, renderboard and sarking. Densities vary from 60Kg/m3 insulation boards to 180Kg/m3 render boards. Some types of woodfibre are flexible, others very rigid. Flexible insulation is designed to be friction-installed between timbers or fitted on top of somewhat irregular surfaces
There are manufacturers in Poland (Beltermo, Steico), Germany (Gutex, Steico HQ), France (Pavatex) and Norway (Hunton)..
There are two different manufacturing processes: wet and dry.
In the wet-process, chipped, waste timber is ground up into small pieces then boiled up with water and a few other chemicals designed to break down the timber into the fibres. During this process, many of the sugars which are of interest to fungus and mould are removed. This slurry is then poured on to a belt sieve and compressed to remove as much water as possible and heated with steam to bond the fibres together. The steaming process softens the natural lignin around the fibres which holds the fibres together in the board, which is typically manufactured to around 20mm thickness. These boards are then laminated up with a water based glue into thicker layers to produce boards up to around 120mm thick.