Young's modulus (or the Young modulus) is a mechanical property of solid materials that measures the tensile or compressive stiffness when the force is applied lengthwise. It is the elastic modulus for tension or axial compression. Young's modulus is defined as the ratio of the stress (force per unit area) applied to the object and the resulting axial strain (a dimensionless quantity that quantifies relative deformation) in the linear elastic region of the material. As such, Young's modulus is similar to and proportional to the spring constant in Hooke's law, but with dimensions of pressure instead of force per distance.

Although Young's modulus is named after the 19th-century British scientist Thomas Young, the concept was developed in 1727 by Leonhard Euler. The first experiments that used the concept of Young's modulus in its modern form were performed by the Italian scientist Giordano Riccati in 1782, pre-dating Young's work by 25 years. The term modulus is derived from the Latin root term modus, which means measure.

Young's modulus, ${\displaystyle E}$, quantifies the relationship between tensile or compressive stress ${\displaystyle \sigma }$ (force per unit area) and axial strain ${\displaystyle \varepsilon }$ (proportional deformation) in the linear elastic region of a material: $${\displaystyle E={\frac {\sigma }{\varepsilon }}}$$

Young's modulus is commonly measured in the International System of Units (SI) in multiples of the pascal (Pa) and common values are in the range of gigapascals (GPa).

Examples:

A solid material undergoes elastic deformation when a small load is applied to it in compression or extension. Elastic deformation is reversible, meaning that the material returns to its original shape after the load is removed.

At near-zero stress and strain, the stress–strain curve is linear, and the relationship between stress and strain is described by Hooke's law that states stress is proportional to strain. The coefficient of proportionality is Young's modulus. The higher the modulus, the more stress is needed to create the same amount of strain; an idealized rigid body would have an infinite Young's modulus. Conversely, a very soft material (such as a fluid) would deform without force, and would have zero Young's modulus.

Material stiffness is a distinct property from the following: