12 Metre

The 12 Metre class is a rating class for racing sailboats that are designed to the International rule. It enables fair competition between boats that rate in the class whilst retaining the freedom to experiment with the details of their designs. The designation "12 Metre" does not refer to any single measurement on the boat, and is not referencing the vessels overall length, rather, measures the sum of the components directed by the formula which governs design and construction parameters. Typically 12 Metre class boats range from 65 to 75 feet (about 20 to 23 m) in length overall; they are most often sloop-rigged, with masts roughly 85 feet (26 m) tall.

The first 12 Metres were built in 1907. The 12 Metre class was used in the Olympic Games of 1908, 1912 and 1920 but few boats participated in these events. The 12 Metre class boats are best known as the boat design used in the America's Cup from 1958 to 1987.

Competitiveness between boats in the class is maintained by requiring the boats to be in compliance with the 12 Metre formula. Designers and builders are required to take into account such things as the sail area, the boat length at the waterline and the boat girth (the measurement around the boat from one sideboard, under the keel, and then over the top on the opposite side back to the original side). The measurements are then weighted in the formula. For example, the present formula takes the square root of the sail area rather than total area. The combination of weighted measurements must be less than or equal to 12 metres. Designers are free to change any of the component variables, as well as other details, such as the size of the rudder and keel, so long as the corresponding changes elsewhere produce an ultimate sum of 12 metres and the resulting boat is both seaworthy and safe. Though disparity between boats are minimized by the rule, enough variation exists so that races are as much about design and construction as they are about seamanship and tactics.

The Formula and associated rules for designing and constructing 12 Metre yachts has been modified several times from inception in racing.

The purpose of the Formula and rules was to encourage designer's creativity to optimize designs to get the best overall performance when racing while still maintaining competitive racing postures between different designs. Although the Formula and Rules allowed for some creativity they were also intended to be comprehensive enough to eliminate loop holes which could result in an extreme design which conformed to the 12 Metre rule but completely outclassed other contemporary designs on the race course. If the rules were considered to be too loose then it would discourage the building of new 12 Metre yachts for fear of a new boat being outclassed even before it was launched.

The Rules were typically updated in response to advances in areas such as material technology (e.g. metal masts versus wooden masts), design technology (e.g. use of the wind tunnel to design sails and sail/mast combinations, advances in fluid dynamics), and equipment (e.g. winch technology).

The Rule has four distinct periods:

Used from 1907 to 1920